Number systems
- Place values
- binary 2k, octal 8k, hex 16k
- To decimal
- Σ dk·bk
- From decimal
- divide by the base, read the remainders bottom-up
- Hex ↔ binary
- one hex digit = 4 bits
- Two’s complement
- invert the bits and add 1
Digital Electronics: cram pack
Formula sheets, the key method steps for every topic and 6 practice problems, with full solutions at the back.
1Formulas and methods
Digital logic: gates, K-maps & flip-flops
- Basic gates
- A·B, A + B, A′, (A·B)′, (A + B)′, A ⊕ B
- Boolean rules
- X + X′ = 1, X·X′ = 0, X + XY = X, XY + XY′ = X
- De Morgan
- (X·Y)′ = X′ + Y′, (X + Y)′ = X′·Y′
- Karnaugh map order
- 00, 01, 11, 10 (Gray code)
- Group of 2ᵏ cells
- loses k variables
- 4-to-1 multiplexer
- F = A′B′I0 + A′BI1 + AB′I2 + ABI3
- Flip-flops
- D: Q⁺ = D, T: Q⁺ = T ⊕ Q, JK: Q⁺ = JQ′ + K′Q
- Counters
- n-bit: 2ⁿ states; mod-N: smallest n with 2ⁿ ≥ N; fout = fclk/N
- Ripple counter
- fmax = 1/(n·tpd)
- Ring and Johnson counters
- n and 2n states
Method
- For a circuit, work from the inputs to the output one gate at a time and write the value on every wire, or write its expression and fill in the truth table.
- For simplification, put the 1s (and the don’t-cares as X) into a Karnaugh map with Gray-code rows and columns: 00, 01, 11, 10.
- Cover the 1s with as few and as large groups of 1, 2, 4, 8 or 16 cells as possible, wrapping round the edges; each group is one product term made of the variables that stay constant. Group the 0s for the POS form.
- For flip-flops and counters, read the inputs at each active clock edge, write the state after every edge, and remember that an n-bit counter wraps round after 2ⁿ states.
Data acquisition & sampling
- Nyquist criterion
- fs > 2·fmax, fN = fs/2
- Alias frequency
- fa = |f − k·fs|, k = round(f/fs)
- Step size
- 1 LSB = VFSR/2ᴺ
- Quantisation error (rounding)
- ±½ LSB
- Truncating ADC code
- D = ⌊Vin/LSB⌋
- Bits for a resolution r
- 2ᴺ ≥ span/r
- Ideal SQNR, full-scale sine
- SQNR = 6.02·N + 1.76 dB
- Data rate
- channels × fs × N bit/s
- Multiplexed ADC
- fs = 1/(n·(tc + tset))
- UART
- Tb = 1/baud; 8N1 = 10 bits per byte; bytes/s = baud/bits per frame
- Baud rate divider
- baud = fclk/(16·D)
Method
- Write down what is given: sampling rate, signal frequencies, number of bits, input range, baud rate.
- For sampling questions, compare each frequency with fs/2; a higher frequency appears at fa = |f − k·fs| with the nearest multiple of fs.
- For resolution questions, find 1 LSB = VFSR/2ᴺ, or the smallest N with 2ᴺ ≥ span/resolution.
- For data rates and UART links, count everything that is sent: channels, samples per second, bits or whole bytes per sample, and the start, parity and stop bits of every frame.
2Practice problems
1.Number systemsMedium
The 8-bit pattern 0110 0111 stores a signed integer in two's complement. What is its value N in decimal?
0110 01118 bit
N =
2.Number systemsHard
An uncompressed image is 800 × 600 pixels with 16 bits per pixel. How much memory M does it take, in KiB (1 KiB = 1024 bytes)?
800 × 600 px16 bit/px1 KiB = 1024 B
M = KiB
3.Digital logic: gates, K-maps & flip-flopsMedium
In this Karnaugh map exactly one 1 has no neighbouring 1, so it stays a group of one cell (a full minterm of four literals) in the minimal SOP form. Neighbours across the map edges count. Click that cell.
F = Σm(5, 6, 13, 15)
- 1AB = 00, CD = 00
- 2AB = 00, CD = 01
- 3AB = 00, CD = 11
- 4AB = 00, CD = 10
- 5AB = 01, CD = 00
- 6AB = 01, CD = 01
- 7AB = 01, CD = 11
- 8AB = 01, CD = 10
- 9AB = 11, CD = 00
- 10AB = 11, CD = 01
- 11AB = 11, CD = 11
- 12AB = 11, CD = 10
- 13AB = 10, CD = 00
- 14AB = 10, CD = 01
- 15AB = 10, CD = 11
- 16AB = 10, CD = 10
4.Digital logic: gates, K-maps & flip-flopsHard
A mod-5 counter is built from the minimum number of flip-flops. How many of the possible states U are never used?
N = 5
U =
5.Data acquisition & samplingMedium
A recorder samples 4 channels at 10 kHz each with a 10-bit ADC. Each sample is stored in whole bytes. Find the memory M needed for a 5 min recording, in MB (1 MB = 10⁶ bytes).
n = 4fs = 10 kHzN = 10t = 5 min
M = MB
6.Data acquisition & samplingHard
An audio measurement needs an ideal signal-to-quantisation-noise ratio of at least 100 dB for a full-scale sine wave. Find the smallest number of ADC bits N.
SQNR ≥ 100 dB
N =
3Solutions
1.Number systems
Answer: N = 103
Positional number systems: each digit is worth its value times a power of the base. In binary the places are worth 1, 2, 4, 8, 16, …; in hexadecimal 1, 16, 256, …, with A–F standing for 10–15. In 8-bit two's complement the leftmost bit is worth −128 instead of +128, which is how negative numbers are stored.
Add the place values
The other bits keep their normal positive values.
64 + 32 + 4 + 2 + 1 = 103
Answer
N = 103
2.Number systems
Answer: M = 937.5 KiB
Positional number systems: each digit is worth its value times a power of the base. In binary the places are worth 1, 2, 4, 8, 16, …; in hexadecimal 1, 16, 256, …, with A–F standing for 10–15. In 8-bit two's complement the leftmost bit is worth −128 instead of +128, which is how negative numbers are stored.
Bits and bytes
800·600·16 = 7680000 bit = 960000 B
Convert to KiB
960000/1024 = 937.5 KiB
Answer
M = 937.5 KiB
3.Digital logic: gates, K-maps & flip-flops
Answer: AB = 01, CD = 10
Karnaugh maps: the cells are ordered in Gray code (00, 01, 11, 10), so neighbouring cells, including the ones across the edges, differ in exactly one variable. Group the 1s in rectangles of 1, 2, 4, 8 or 16 cells, as large as possible and as few as possible, until every 1 is covered. Each group is one product term: the variables that stay constant inside it. A group of 2ᵏ cells loses k variables. Don't-cares (X) may be used to make groups bigger but never have to be covered. Grouping the 0s instead gives the minimal POS form.
Neighbours of each 1
A 1 with a neighbouring 1 can join a group of two or more.
m6: m7, m4, m2, m14 → 0
The isolated 1
m6 = A′BCD′ → AB = 01, CD = 10
Answer
AB = 01, CD = 10
4.Digital logic: gates, K-maps & flip-flops
Answer: U = 3
Flip-flops and counters: a flip-flop changes only at the active clock edge. D copies its input (Q⁺ = D); T toggles when T = 1; JK holds for 00, resets for 01, sets for 10 and toggles for 11. An n-bit binary counter has 2ⁿ states and counts modulo 2ⁿ; a mod-N counter goes 0, 1, …, N − 1 and back to 0, and needs the smallest n with 2ⁿ ≥ N flip-flops. Each stage of a ripple counter halves the frequency, so the last output of a mod-N counter runs at fclk/N. A Johnson counter of n flip-flops has 2n states, a ring counter n.
Number of flip-flops
2ⁿ ≥ 5 → n = 3 (2³ = 8)
Unused states
U = 8 − 5 = 3
Answer
U = 3
5.Data acquisition & sampling
Answer: M = 24 MB
Data rates: every channel delivers fs samples per second of N bits, so the raw rate is channels × fs × N bit/s. In memory a sample takes whole bytes (a 12-bit sample is stored in 2 bytes), so the memory for a recording is channels × fs × bytes per sample × time. A multiplexed ADC converts the channels one after another: each conversion (with settling) takes t, so one round of n channels takes n·t and each channel is sampled at 1/(n·t).
Bytes per sample
⌈10/8⌉ = 2 B
Byte rate
4·10000·2 = 80000 B/s
Memory
M = 80000·300 = 2.4 × 10⁷ B = 24 MB
Answer
M = 24 MB
6.Data acquisition & sampling
Answer: N = 17
ADC resolution: an N-bit converter divides its full-scale range VFSR into 2ᴺ codes, from 0 to 2ᴺ − 1. One step is 1 LSB = VFSR/2ᴺ: the smallest change the converter can show. A truncating ADC gives the code ⌊Vin/LSB⌋; a rounding ADC is never more than ½ LSB away from the true value, its quantisation error. Every extra bit halves the LSB and adds about 6 dB to the ideal signal-to-quantisation-noise ratio SQNR = 6.02·N + 1.76 dB for a full-scale sine. To reach a resolution r over a span, choose the smallest N with 2ᴺ ≥ span/r.
Solve for N
N ≥ (100 − 1.76)/6.02 = 16.32
Round up
N = 17
check: 6.02·17 + 1.76 = 104.1 dB ≥ 100 dB
Answer
N = 17
ExamProblems · examproblems.com/courses/digital-electronics