Number systems
- Place values
- binary 2k, octal 8k, hex 16k
- To decimal
- Σ dk·bk
- From decimal
- divide by the base, read the remainders bottom-up
- Hex ↔ binary
- one hex digit = 4 bits
- Two’s complement
- invert the bits and add 1
Digital Electronics: cram pack
Formula sheets, the key method steps for every topic and 6 practice problems, with full solutions at the back.
1Formulas and methods
Digital logic: gates, K-maps & flip-flops
- Basic gates
- A·B, A + B, A′, (A·B)′, (A + B)′, A ⊕ B
- Boolean rules
- X + X′ = 1, X·X′ = 0, X + XY = X, XY + XY′ = X
- De Morgan
- (X·Y)′ = X′ + Y′, (X + Y)′ = X′·Y′
- Karnaugh map order
- 00, 01, 11, 10 (Gray code)
- Group of 2ᵏ cells
- loses k variables
- 4-to-1 multiplexer
- F = A′B′I0 + A′BI1 + AB′I2 + ABI3
- Flip-flops
- D: Q⁺ = D, T: Q⁺ = T ⊕ Q, JK: Q⁺ = JQ′ + K′Q
- Counters
- n-bit: 2ⁿ states; mod-N: smallest n with 2ⁿ ≥ N; fout = fclk/N
- Ripple counter
- fmax = 1/(n·tpd)
- Ring and Johnson counters
- n and 2n states
Method
- For a circuit, work from the inputs to the output one gate at a time and write the value on every wire, or write its expression and fill in the truth table.
- For simplification, put the 1s (and the don’t-cares as X) into a Karnaugh map with Gray-code rows and columns: 00, 01, 11, 10.
- Cover the 1s with as few and as large groups of 1, 2, 4, 8 or 16 cells as possible, wrapping round the edges; each group is one product term made of the variables that stay constant. Group the 0s for the POS form.
- For flip-flops and counters, read the inputs at each active clock edge, write the state after every edge, and remember that an n-bit counter wraps round after 2ⁿ states.
Data acquisition & sampling
- Nyquist criterion
- fs > 2·fmax, fN = fs/2
- Alias frequency
- fa = |f − k·fs|, k = round(f/fs)
- Step size
- 1 LSB = VFSR/2ᴺ
- Quantisation error (rounding)
- ±½ LSB
- Truncating ADC code
- D = ⌊Vin/LSB⌋
- Bits for a resolution r
- 2ᴺ ≥ span/r
- Ideal SQNR, full-scale sine
- SQNR = 6.02·N + 1.76 dB
- Data rate
- channels × fs × N bit/s
- Multiplexed ADC
- fs = 1/(n·(tc + tset))
- UART
- Tb = 1/baud; 8N1 = 10 bits per byte; bytes/s = baud/bits per frame
- Baud rate divider
- baud = fclk/(16·D)
Method
- Write down what is given: sampling rate, signal frequencies, number of bits, input range, baud rate.
- For sampling questions, compare each frequency with fs/2; a higher frequency appears at fa = |f − k·fs| with the nearest multiple of fs.
- For resolution questions, find 1 LSB = VFSR/2ᴺ, or the smallest N with 2ᴺ ≥ span/resolution.
- For data rates and UART links, count everything that is sent: channels, samples per second, bits or whole bytes per sample, and the start, parity and stop bits of every frame.
2Practice problems
1.Number systemsMedium
Write −3 as an 8-bit two's complement pattern. Read the pattern as an unsigned binary number: what is its value U in decimal?
N = −38 bit
U =
2.Number systemsHard
What is the most negative integer N that can be stored in 32-bit two's complement?
32 bit
N =
3.Digital logic: gates, K-maps & flip-flopsMedium
Use the Karnaugh map to find the minimal product-of-sums (POS) form of F(A, B, C) = Σm(0, 1, 2, 3, 5, 6). How many sum terms (factors) N does it have?
F(A, B, C) = Σm(0, 1, 2, 3, 5, 6)
N =
4.Digital logic: gates, K-maps & flip-flopsHard
Find the minimal SOP form of F(A, B, C, D) = Σm(0, 2, 5, 10, 14, 15) + d(7, 9), where d marks the don't-care conditions. How many product terms N does it have?
F(A, B, C, D) = Σm(0, 2, 5, 10, 14, 15) + d(7, 9)
N =
5.Data acquisition & samplingMedium
A recorder samples 4 channels at 2 kHz each with a 14-bit ADC. Each sample is stored in whole bytes. Find the memory M needed for a 5 min recording, in MB (1 MB = 10⁶ bytes).
n = 4fs = 2 kHzN = 14t = 5 min
M = MB
6.Data acquisition & samplingHard
A temperature sensor gives 10 mV/°C (0 V at 0 °C). Its signal is amplified 1 times and fed to a 10-bit ADC with a range of 0 to 5 V (1 LSB = VFSR/2ᴺ). Find the temperature change ΔTLSB that corresponds to one LSB.
S = 10 mV/°CG = 1N = 10VFSR = 5 V
ΔTLSB = °C
3Solutions
1.Number systems
Answer: U = 253
Positional number systems: each digit is worth its value times a power of the base. In binary the places are worth 1, 2, 4, 8, 16, …; in hexadecimal 1, 16, 256, …, with A–F standing for 10–15. In 8-bit two's complement the leftmost bit is worth −128 instead of +128, which is how negative numbers are stored.
Invert and add one
3 = 0000 0011
inverted: 1111 1100
+1 → 1111 1101
Read it as unsigned
1111 1101₂ = 256 − 3 = 253
Answer
U = 253
2.Number systems
Answer: N = −2.147 × 10⁹
Positional number systems: each digit is worth its value times a power of the base. In binary the places are worth 1, 2, 4, 8, 16, …; in hexadecimal 1, 16, 256, …, with A–F standing for 10–15. In 8-bit two's complement the leftmost bit is worth −128 instead of +128, which is how negative numbers are stored.
Most negative value
−231 = −2147483648
Answer
N = −2147483648
3.Digital logic: gates, K-maps & flip-flops
Answer: N = 2
Karnaugh maps: the cells are ordered in Gray code (00, 01, 11, 10), so neighbouring cells, including the ones across the edges, differ in exactly one variable. Group the 1s in rectangles of 1, 2, 4, 8 or 16 cells, as large as possible and as few as possible, until every 1 is covered. Each group is one product term: the variables that stay constant inside it. A group of 2ᵏ cells loses k variables. Don't-cares (X) may be used to make groups bigger but never have to be covered. Grouping the 0s instead gives the minimal POS form.
Group the 0s
Every group is a rectangle of 2ᵏ cells; edge cells are neighbours of the cells on the opposite edge.
(A′ + B + C)
(A′ + B′ + C′)
Minimal POS form
F = (A′ + B + C)(A′ + B′ + C′)
N = 2
Answer
N = 2
4.Digital logic: gates, K-maps & flip-flops
Answer: N = 4
Karnaugh maps: the cells are ordered in Gray code (00, 01, 11, 10), so neighbouring cells, including the ones across the edges, differ in exactly one variable. Group the 1s in rectangles of 1, 2, 4, 8 or 16 cells, as large as possible and as few as possible, until every 1 is covered. Each group is one product term: the variables that stay constant inside it. A group of 2ᵏ cells loses k variables. Don't-cares (X) may be used to make groups bigger but never have to be covered. Grouping the 0s instead gives the minimal POS form.
Prime implicants
The largest groups that can be formed from 1s and Xs.
B′CD′, BCD, ACD′, A′B′D′, A′BD, ABC
Minimal cover
F = BCD + ACD′ + A′B′D′ + A′BD
N = 4
Answer
N = 4
Another grouping of the same size exists; it has the same number of terms and literals.
5.Data acquisition & sampling
Answer: M = 4.8 MB
Data rates: every channel delivers fs samples per second of N bits, so the raw rate is channels × fs × N bit/s. In memory a sample takes whole bytes (a 12-bit sample is stored in 2 bytes), so the memory for a recording is channels × fs × bytes per sample × time. A multiplexed ADC converts the channels one after another: each conversion (with settling) takes t, so one round of n channels takes n·t and each channel is sampled at 1/(n·t).
Bytes per sample
⌈14/8⌉ = 2 B
Byte rate
4·2000·2 = 16000 B/s
Memory
M = 16000·300 = 4.8 × 10⁶ B = 4.8 MB
Answer
M = 4.8 MB
6.Data acquisition & sampling
Answer: ΔTLSB = 0.4883 °C
ADC resolution: an N-bit converter divides its full-scale range VFSR into 2ᴺ codes, from 0 to 2ᴺ − 1. One step is 1 LSB = VFSR/2ᴺ: the smallest change the converter can show. A truncating ADC gives the code ⌊Vin/LSB⌋; a rounding ADC is never more than ½ LSB away from the true value, its quantisation error. Every extra bit halves the LSB and adds about 6 dB to the ideal signal-to-quantisation-noise ratio SQNR = 6.02·N + 1.76 dB for a full-scale sine. To reach a resolution r over a span, choose the smallest N with 2ᴺ ≥ span/r.
Step size
1 LSB = 5000/1024 = 4.883 mV
Sensitivity at the ADC
10·1 = 10 mV/°C
Temperature resolution
ΔTLSB = 4.883/10 = 0.4883 °C
Answer
ΔTLSB = 0.4883 °C
The ADC reaches full scale at 500 °C.
ExamProblems · examproblems.com/courses/digital-electronics