Number systems
- Place values
- binary 2k, octal 8k, hex 16k
- To decimal
- Σ dk·bk
- From decimal
- divide by the base, read the remainders bottom-up
- Hex ↔ binary
- one hex digit = 4 bits
- Two’s complement
- invert the bits and add 1
Digital Electronics: cram pack
Formula sheets, the key method steps for every topic and 6 practice problems, with full solutions at the back.
1Formulas and methods
Digital logic: gates, K-maps & flip-flops
- Basic gates
- A·B, A + B, A′, (A·B)′, (A + B)′, A ⊕ B
- Boolean rules
- X + X′ = 1, X·X′ = 0, X + XY = X, XY + XY′ = X
- De Morgan
- (X·Y)′ = X′ + Y′, (X + Y)′ = X′·Y′
- Karnaugh map order
- 00, 01, 11, 10 (Gray code)
- Group of 2ᵏ cells
- loses k variables
- 4-to-1 multiplexer
- F = A′B′I0 + A′BI1 + AB′I2 + ABI3
- Flip-flops
- D: Q⁺ = D, T: Q⁺ = T ⊕ Q, JK: Q⁺ = JQ′ + K′Q
- Counters
- n-bit: 2ⁿ states; mod-N: smallest n with 2ⁿ ≥ N; fout = fclk/N
- Ripple counter
- fmax = 1/(n·tpd)
- Ring and Johnson counters
- n and 2n states
Method
- For a circuit, work from the inputs to the output one gate at a time and write the value on every wire, or write its expression and fill in the truth table.
- For simplification, put the 1s (and the don’t-cares as X) into a Karnaugh map with Gray-code rows and columns: 00, 01, 11, 10.
- Cover the 1s with as few and as large groups of 1, 2, 4, 8 or 16 cells as possible, wrapping round the edges; each group is one product term made of the variables that stay constant. Group the 0s for the POS form.
- For flip-flops and counters, read the inputs at each active clock edge, write the state after every edge, and remember that an n-bit counter wraps round after 2ⁿ states.
Data acquisition & sampling
- Nyquist criterion
- fs > 2·fmax, fN = fs/2
- Alias frequency
- fa = |f − k·fs|, k = round(f/fs)
- Step size
- 1 LSB = VFSR/2ᴺ
- Quantisation error (rounding)
- ±½ LSB
- Truncating ADC code
- D = ⌊Vin/LSB⌋
- Bits for a resolution r
- 2ᴺ ≥ span/r
- Ideal SQNR, full-scale sine
- SQNR = 6.02·N + 1.76 dB
- Data rate
- channels × fs × N bit/s
- Multiplexed ADC
- fs = 1/(n·(tc + tset))
- UART
- Tb = 1/baud; 8N1 = 10 bits per byte; bytes/s = baud/bits per frame
- Baud rate divider
- baud = fclk/(16·D)
Method
- Write down what is given: sampling rate, signal frequencies, number of bits, input range, baud rate.
- For sampling questions, compare each frequency with fs/2; a higher frequency appears at fa = |f − k·fs| with the nearest multiple of fs.
- For resolution questions, find 1 LSB = VFSR/2ᴺ, or the smallest N with 2ᴺ ≥ span/resolution.
- For data rates and UART links, count everything that is sent: channels, samples per second, bits or whole bytes per sample, and the start, parity and stop bits of every frame.
2Practice problems
1.Number systemsMedium
Set the bits so they store −116 in 8-bit two's complement. Read as an unsigned number, what is the pattern's value U?
N = −1168 bit
U =
2.Number systemsHard
Set the bits to the 8-bit result of 1101 0011 XOR 1011 0011. What is the result's value R in decimal?
1101 0011XOR1011 0011
R =
3.Digital logic: gates, K-maps & flip-flopsMedium
Use the Karnaugh map to find the minimal product-of-sums (POS) form of F(A, B, C) = Σm(0, 2, 5, 6). How many sum terms (factors) N does it have?
F(A, B, C) = Σm(0, 2, 5, 6)
N =
4.Digital logic: gates, K-maps & flip-flopsHard
A 4-bit ring counter Q₃Q₂Q₁Q₀ starts at 1010. At every clock edge the bits shift one place to the right (Q₃ → Q₂ → Q₁ → Q₀) and Q₃ receives Q₀. Give the state Q = Q₃Q₂Q₁Q₀ as a decimal number after 7 clock edges.
Q₃Q₂Q₁Q₀ = 10107
Q =
5.Data acquisition & samplingMedium
A 12-bit ADC with an input range of 0 to 2.5 V truncates: its output code is ⌊Vin/LSB⌋ with 1 LSB = VFSR/2ᴺ. Find the decimal output code D for an input of 2.158 V.
N = 12VFSR = 2.5 VVin = 2.158 V
D =
6.Data acquisition & samplingHard
An 800 Hz square wave is sampled at 2 kHz with no anti-aliasing filter. A square wave contains the odd harmonics 3f₁, 5f₁, 7f₁, … At which frequency fa does its harmonic 3f₁ appear in the sampled data? Give it in Hz.
f₁ = 800 Hzfs = 2 kHzharmonic: 3f₁
fa = Hz
3Solutions
1.Number systems
Answer: U = 140
Setting bits: each bit is worth a power of two (128, 64, …, 1). One hex digit is exactly four bits, and in 8-bit two's complement the leftmost bit is worth −128. Bitwise operations work on each bit position separately.
Invert and add one
116 = 0111 0100
inverted: 1000 1011
+1 → 1000 1100
Read it as unsigned
1000 1100₂ = 256 − 116 = 140
Answer
U = 140
2.Number systems
Answer: R = 96
Setting bits: each bit is worth a power of two (128, 64, …, 1). One hex digit is exactly four bits, and in 8-bit two's complement the leftmost bit is worth −128. Bitwise operations work on each bit position separately.
Bit by bit
XOR gives 1 where the two bits differ.
1101 0011
XOR 1011 0011
= 0110 0000
Value of the result
0110 0000₂ = 96
Answer
R = 96
3.Digital logic: gates, K-maps & flip-flops
Answer: N = 3
Karnaugh maps: the cells are ordered in Gray code (00, 01, 11, 10), so neighbouring cells, including the ones across the edges, differ in exactly one variable. Group the 1s in rectangles of 1, 2, 4, 8 or 16 cells, as large as possible and as few as possible, until every 1 is covered. Each group is one product term: the variables that stay constant inside it. A group of 2ᵏ cells loses k variables. Don't-cares (X) may be used to make groups bigger but never have to be covered. Grouping the 0s instead gives the minimal POS form.
Group the 0s
Every group is a rectangle of 2ᵏ cells; edge cells are neighbours of the cells on the opposite edge.
(B′ + C′)
(A + C′)
(A′ + B + C)
Minimal POS form
F = (B′ + C′)(A + C′)(A′ + B + C)
N = 3
Answer
N = 3
4.Digital logic: gates, K-maps & flip-flops
Answer: Q = 5
Flip-flops and counters: a flip-flop changes only at the active clock edge. D copies its input (Q⁺ = D); T toggles when T = 1; JK holds for 00, resets for 01, sets for 10 and toggles for 11. An n-bit binary counter has 2ⁿ states and counts modulo 2ⁿ; a mod-N counter goes 0, 1, …, N − 1 and back to 0, and needs the smallest n with 2ⁿ ≥ N flip-flops. Each stage of a ripple counter halves the frequency, so the last output of a mod-N counter runs at fclk/N. A Johnson counter of n flip-flops has 2n states, a ring counter n.
State after every edge
1010 → 0101 → 1010 → 0101 → 1010 → 0101 → 1010 → 0101
Decimal value
0101₂ = 5
Answer
Q = 5
5.Data acquisition & sampling
Answer: D = 3535
ADC resolution: an N-bit converter divides its full-scale range VFSR into 2ᴺ codes, from 0 to 2ᴺ − 1. One step is 1 LSB = VFSR/2ᴺ: the smallest change the converter can show. A truncating ADC gives the code ⌊Vin/LSB⌋; a rounding ADC is never more than ½ LSB away from the true value, its quantisation error. Every extra bit halves the LSB and adds about 6 dB to the ideal signal-to-quantisation-noise ratio SQNR = 6.02·N + 1.76 dB for a full-scale sine. To reach a resolution r over a span, choose the smallest N with 2ᴺ ≥ span/r.
Step size
1 LSB = 2.5/212 = 0.6104 mV
Code
Vin/LSB = 2158/0.6104 = 3536
code = ⌊3536⌋ = 3535
Answer
D = 3535
In binary that is 110111001111.
6.Data acquisition & sampling
Answer: fa = 400 Hz
Sampling: an ADC measures the signal fs times per second. By the Nyquist–Shannon theorem a frequency f is captured correctly only while f < fs/2, the Nyquist (folding) frequency, so the sampling rate must exceed twice the highest signal frequency. A higher frequency is not lost: it shows up as an alias at fa = |f − k·fs|, with the whole number k that brings the result between 0 and fs/2. The samples cannot tell the two apart, so an analogue anti-aliasing filter must remove everything above fs/2 before the ADC.
Harmonic frequency
3f₁ = 3·800 Hz = 2.4 kHz
Nearest multiple of the sampling rate
m = round(1.2) = 1
Alias frequency
fa = |2400 − 1·2000| = 400 Hz
Answer
fa = 400 Hz
The alias lands inside the signal band, where no digital filter can remove it. Only an analogue filter before the ADC helps.
ExamProblems · examproblems.com/courses/digital-electronics