Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)2 s15

A car driving at 54 km/h brakes with a constant deceleration of 7.5 m/s² until it stops. Find the braking distance s.

v₀ = 54 km/ha = −7.5 m/s²v = 0
s = m
2.KinematicsHard
t (s)v (m/s)4 s

A tram starts from rest and accelerates at 1.5 m/s² for 4 s, then runs at constant speed for 23 s, and finally brakes at 2.5 m/s² until it stops. Find the total travel time t.

a1 = 1.5 m/s²t1 = 4 st2 = 23 sa3 = −2.5 m/s²
t = s
3.Newton’s lawsMedium
boxv₀ = 7.5 m/sμ = ?

A box slides across a level floor with an initial speed of 7.5 m/s and comes to rest after 29 m. Use g = 9.81 m/s². Find the coefficient of kinetic friction μ.

v₀ = 7.5 m/sd = 29 mg = 9.81 m/s²
μ =
4.Newton’s lawsHard
2 kg7 kgTF = 85 Nμ = 0.25

Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 85 N pulls the front 7 kg block; the 2 kg block is towed behind. The coefficient of kinetic friction is 0.25 for both blocks. Use g = 9.81 m/s². Find the acceleration a of the blocks.

m1 = 2 kgm2 = 7 kgF = 85 Nμ = 0.25g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
v0​ = 28 m/s35°rangeH = ?

A ball is launched at 35° above horizontal from level ground. Ignore air resistance. Find the maximum height H the ball reaches.

v0 = 28 m/sθ = 35°g = 9.81 m/s²
H = m
6.Projectile motionHard
h = 20 mv0​ = 35 m/s55°α = ?

A ball is launched at 35 m/s and 55° above the horizontal from the top of a 20 m cliff. Ignore air resistance and use g = 9.81 m/s². At what angle α below the horizontal does it hit the ground?

v₀ = 35 m/sθ = 55°h = 20 mg = 9.81 m/s²
α = °
7.Circular motionMedium
r = 120 m18 m/s

A 1600 kg car drives over the top of a hump in the road at 18 m/s. The top of the hump is a circular arc of radius 120 m. Use g = 9.81 m/s². Find the normal force N of the road on the car at the top.

m = 1600 kgv = 18 m/sr = 120 mg = 9.81 m/s²
N = N
8.Circular motionHard
R = 5.5 mh = 18.7 m

A 3 kg cart is released from rest at a height of 18.7 m on a frictionless track and runs through a vertical loop of radius 5.5 m. Use g = 9.81 m/s². Find the normal force Nbottom of the track on the cart at the bottom of the loop.

m = 3 kgh = 18.7 mR = 5.5 mg = 9.81 m/s²
Nbottom = N
9.Work & energyMedium
40°d = 12 mμ = 0.1

A block slides from rest down a slope at 40° to the horizontal. The coefficient of kinetic friction is 0.1. Find its speed v after it has slid 12 m along the slope.

θ = 40°μ = 0.1d = 12 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
h = 9 mR = 3 mN = ?

A 1 kg cart is released from rest at a height of 9 m on a smooth track that leads into a vertical circular loop of radius 3 m. Find the normal force N the track exerts on the cart at the top of the loop.

m = 1 kgh = 9 mR = 3 mg = 9.81 m/s²
N = N
11.Momentum & collisionsMedium
9 kg55 m/s4 kgv′2​ = ?

A 13 kg projectile moving horizontally at 32 m/s explodes into two fragments that move along the same line. The 9 kg fragment continues forwards at 55 m/s. Find the velocity v′2 of the 4 kg fragment (positive in the original direction).

M = 13 kgu = 32 m/sm1 = 9 kgv′1 = 55 m/sm2 = 4 kg
v′2 = m/s
12.Momentum & collisionsHard
1700 kg10 m/s900 kg12 m/sθ = ?

At a crossing a 1700 kg car travelling east at 10 m/s collides with a 900 kg car travelling north at 12 m/s. The cars lock together. Find the direction θ of the wreck just after the collision, measured north of east.

m1 = 1700 kgv1 = 10 m/s (E)m2 = 900 kgv2 = 12 m/s (N)
θ = °
13.Rigid-body rotationMedium
L = 2.9 mm = 15.5 kgα

A uniform slender rod of mass 15.5 kg and length 2.9 m is pinned at one end and held horizontal. It is released from rest. Use g = 9.81 m/s². Find the vertical force R that the pin exerts on the rod just after release.

m = 15.5 kgL = 2.9 mg = 9.81 m/s²
R = N
14.Rigid-body rotationHard
2 m/sω

A hollow sphere of mass 17.5 kg rolls without slipping at 2 m/s. What percentage p of its total kinetic energy is rotational?

m = 17.5 kgv = 2 m/sI = (2/3)·m·r²
p = %
15.Gears & gear trainsMedium
N1​ = 12N2​ = 45

A 3 kW motor running at 960 rpm drives a pinion with 12 teeth, which meshes with a gear with 45 teeth. Ignore losses. Find the torque T1 on the motor shaft.

P = 3 kWn1 = 960 rpmN1 = 12N2 = 45η = 100%
T1 = N·m
16.Gears & gear trainsHard
A = 15B = 25C = 15D = 25

An 11 kW motor at 1440 rpm drives gear A (15 teeth), which meshes with gear B (25 teeth). Gear C (15 teeth) on the same shaft as B drives gear D (25 teeth) on the output shaft. Each gear mesh has an efficiency of 96%. Find the output torque Tout.

P = 11 kWnin = 1440 rpmA = 15B = 25C = 15D = 25ηmesh = 96%
Tout = N·m
17.Springs & pendulumsMedium
t (s)x (cm)0.95 s

A 3.2 kg mass on a spring with k = 70 N/m is pulled 11 cm in the positive direction and released from rest at t = 0. Find its displacement x from equilibrium at t = 0.95 s (with sign).

m = 3.2 kgk = 70 N/mA = 11 cmt = 0.95 s
x = cm
18.Springs & pendulumsHard
t (s)x (cm)t = ?12

A body oscillates in simple harmonic motion with period 1.5 s and amplitude 20 cm. What is the shortest time t it needs to move from equilibrium to a displacement of 12 cm?

T = 1.5 sA = 20 cmx = 12 cm
t = s
19.Mechanical vibrationsMedium
tx20 mm3 cycles4.4 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 20 mm is followed 3 cycles later by a peak of 4.4 mm. Find the damping ratio ζ.

x0 = 20 mmx3 = 4.4 mmn = 3
ζ =
20.Mechanical vibrationsHard
k1​ = 40k2​ = 12k3​ = 25m = 25 kg

A 25 kg mass hangs from spring k₃ = 25 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 40 kN/m and k₂ = 12 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 25 kgk1 = 40 kN/mk2 = 12 kN/mk3 = 25 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: s = 15 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 54/3.6 = 15 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 15²/(2·7.5) = 15 m

Answer

s = 15 m
2.Kinematics

Answer: t = 29.4 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Top speed

v = a1·t1 = 1.5·4 = 6 m/s

Braking time

t3 = v/a3 = 6/2.5 = 2.4 s

Total time

t = 4 + 23 + 2.4 = 29.4 s

Answer

t = 29.4 s
3.Newton’s laws

Answer: μ = 0.09886

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Deceleration

a = v₀²/(2d) = 7.5²/(2·29) = 0.9698 m/s²

Friction coefficient

μ·m·g = m·a → μ = a/g = 0.9698/9.81 = 0.09886

Answer

μ = 0.09886
4.Newton’s laws

Answer: a = 6.992 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Whole system

a = (F − μ·(m1 + m2)·g)/(m1 + m2) = (85 − 22.07)/9 = 6.992 m/s²

Answer

a = 6.992 m/s²
5.Projectile motion

Answer: H = 13.15 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 28·cos 35° = 22.94 m/s
vy = v0·sin θ = 28·sin 35° = 16.06 m/s

Highest point

At the top the vertical velocity is zero: vy² = 2gH.

H = vy²/(2g) = 16.06²/(2·9.81) = 13.15 m

Answer

H = 13.15 m
6.Projectile motion

Answer: α = 60.05 °

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

vx = 35·cos 55° = 20.08 m/s
vy0 = 35·sin 55° = 28.67 m/s

Vertical speed at impact

Energy or v² = v₀² + 2as in the vertical direction.

vy = √(28.67² + 2·9.81·20) = 34.85 m/s

Impact angle

tan α = vy/vx = 34.85/20.08 → α = 60.05°

Answer

α = 60.05°
7.Circular motion

Answer: N = 11376 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the top

Towards the centre (down) is positive.

m·g − N = m·v²/r
N = 1600·9.81 − 1600·18²/120 = 15696 − 4320 = 11376 N

Answer

N = 11376 N

The car feels lighter: the road pushes up less than its weight.

8.Circular motion

Answer: Nbottom = 229.6 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Speed from energy conservation

v² = 2·9.81·18.7 = 366.9 m²/s²

Forces

Towards the centre is positive.

N = m·v²/R + m·g = 3·366.9/5.5 + 29.43 = 229.6 N

Answer

Nbottom = 229.6 N
9.Work & energy

Answer: v = 11.55 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy balance along the slope

The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.

½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·12·(0.6428 − 0.1·0.766)) = 11.55 m/s

Answer

v = 11.55 m/s
10.Work & energy

Answer: N = 9.81 N

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.

Speed at the top

v² = 2g(h − 2R) = 2·9.81·(9 − 6) = 58.86 m²/s²

Forces at the top

m·g = 1·9.81 = 9.81 N
N = mv²/R − mg = 1·58.86/3 − 9.81 = 9.81 N

Answer

N = 9.81 N

The cart just makes it round when h = 2.5R; then N = 0 at the top.

11.Momentum & collisions

Answer: v′2 = −19.75 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum before

p = M·u = 13·32 = 416 kg·m/s

Momentum after

416 = 9·55 + 4·v′2
v′2 = (416 − 495)/4 = −19.75 m/s

Answer

v′2 = −19.75 m/s

The minus sign means the second fragment flies backwards.

12.Momentum & collisions

Answer: θ = 32.43 °

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum components

px = 1700·10 = 17000 kg·m/s
py = 900·12 = 10800 kg·m/s

Direction

tan θ = py/px = 0.6353 → θ = 32.43°

Answer

θ = 32.43°
13.Rigid-body rotation

Answer: R = 38.01 N

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Moments about the pin

At the moment of release ω = 0, so there is no centripetal acceleration and the centre accelerates straight down.

m·g·L/2 = (m·L²/3)·α → α = 3g/(2L) = 3·9.81/(2·2.9) = 5.074 rad/s²

Vertical forces

aG = α·L/2 = 7.357 m/s²
m·g − R = m·aG → R = 15.5·(9.81 − 7.357) = 38.01 N

Answer

R = 38.01 N

R = m·g/4, independent of the length.

14.Rigid-body rotation

Answer: p = 40 %

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Translational and rotational parts

Etrans = ½·m·v² = ½·17.5·2² = 35 J
Erot = ½·I·ω² = ½·0.6667·m·r²·(v/r)² = 0.6667·35 = 23.33 J

Rotational share

p = 23.33/58.33·100% = c/(1 + c)·100% = 40%

Answer

p = 40 %

The share depends only on the shape, not on the mass or the speed.

15.Gears & gear trains

Answer: T1 = 29.84 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·960/60 = 100.5 rad/s
T1 = P/ω₁ = 3000/100.5 = 29.84 N·m

Answer

T1 = 29.84 N·m
16.Gears & gear trains

Answer: Tout = 186.7 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Output speed

nout = 1440·(15/25)·(15/25) = 518.4 rpm
ωout = 2π·518.4/60 = 54.29 rad/s

Output power and torque

Pout = 11000·0.96² = 10138 W
Tout = Pout/ωout = 10138/54.29 = 186.7 N·m

Answer

Tout = 186.7 N·m
17.Springs & pendulums

Answer: x = −2.925 cm

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(70/3.2) = 4.677 rad/s
ω·t = 4.677·0.95 = 4.443 rad

Displacement

x = A·cos(ω·t) = 11·cos(4.443) = −2.925 cm

Answer

x = −2.925 cm
18.Springs & pendulums

Answer: t = 0.1536 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = 2π/T = 2π/1.5 = 4.189 rad/s

Solve for the time

0.6 = sin(ω·t) → ω·t = arcsin(0.6) = 0.6435 rad
t = 0.6435/4.189 = 0.1536 s

Answer

t = 0.1536 s
19.Mechanical vibrations

Answer: ζ = 0.08007

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/3)·ln(20/4.4) = 0.5047

Damping ratio

ζ = δ/√(4π² + δ²) = 0.5047/√(39.48 + 0.2547) = 0.08007

Answer

ζ = 0.08007
20.Mechanical vibrations

Answer: fn = 4.136 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 40 + 12 = 52 kN/m
keq = 52·25/(52 + 25) = 16.88 kN/m

Natural frequency

ωn = √(16883/25) = 25.99 rad/s
fn = 25.99/(2π) = 4.136 Hz

Answer

fn = 4.136 Hz

ExamProblems · examproblems.com/courses/dynamics