Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
a = ?s = 1600 m

A plane needs a speed of 180 km/h to take off and the usable runway is 1600 m long. Starting from rest, what constant acceleration a does it need?

v₀ = 0v = 180 km/hs = 1600 m
a = m/s²
2.KinematicsHard
a = 30 m/s²

A model rocket is launched straight up from rest. Its engine gives it a constant upward acceleration of 30 m/s² for 2.5 s, after which the engine stops and the rocket moves freely. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax the rocket reaches.

a = 30 m/s²t1 = 2.5 sg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
7 kg0.5 kg

Masses of 7 kg and 0.5 kg hang on either side of a light, frictionless pulley, connected by a light string. The system is released from rest. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 7 kgm2 = 0.5 kgg = 9.81 m/s²
T = N
4.Newton’s lawsHard
m1​ = 10 kg5.5 kgμ = 0.3

A 10 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 5.5 kg mass. The coefficient of kinetic friction between block and table is 0.3. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 10 kgm2 = 5.5 kgμ = 0.3g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = 12 m/s25°rangeH = ?

A ball is launched at 25° above horizontal from level ground. Ignore air resistance. Find the maximum height H the ball reaches.

v0 = 12 m/sθ = 25°g = 9.81 m/s²
H = m
6.Projectile motionHard
h = 25 mv0​ = 24 m/s40°H = ?

A ball is launched at 24 m/s and 40° above the horizontal from the top of a 25 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the greatest height H above the ground at the foot of the cliff.

v₀ = 24 m/sθ = 40°h = 25 mg = 9.81 m/s²
H = m
7.Circular motionMedium
r = 95 mvmax​ = ?

A car takes a flat curve of radius 95 m. The coefficient of static friction between tyres and road is 0.7. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 95 mμs = 0.7g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
r = 1.5 mv = ?

A ball on a string 1.5 m long is swung in a vertical circle. Use g = 9.81 m/s². What is the smallest speed vmin at the top for which the string just stays tight?

r = 1.5 mg = 9.81 m/s²
vmin = m/s
9.Work & energyMedium
90 km/h

A car travelling at 90 km/h on a level road brakes hard and skids to a stop with its wheels locked. The coefficient of kinetic friction between the tyres and the road is 0.5. Find the stopping distance d.

v = 90 km/hμ = 0.5g = 9.81 m/s²
d = m
10.Work & energyHard
h = 2 mL = 1.5 mμ = 0.1k = 1000 N/m

A 10 kg block is released from rest at height 2 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 1.5 m long (μ = 0.1) and then runs onto a spring (k = 1000 N/m) on a smooth surface. Find the maximum compression x of the spring.

m = 10 kgh = 2 mL = 1.5 mμ = 0.1k = 1000 N/mg = 9.81 m/s²
x = cm
11.Momentum & collisionsMedium
3.5 kgv = ?15 gh = 13 cm

A 15 g bullet is fired horizontally into a 3.5 kg wooden block hanging on light strings, and stays inside it. The block swings up until it is 13 cm higher than at the start. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 15 gM = 3.5 kgh = 13 cmg = 9.81 m/s²
v = m/s
12.Momentum & collisionsHard
13 m/s18 m/s

A 0.4 kg ball hits a wall at 13 m/s and bounces straight back at 18 m/s. The contact lasts 10 ms. Find the average force Favg of the wall on the ball.

m = 0.4 kgvin = 13 m/svout = 18 m/sΔt = 10 ms
Favg = N
13.Rigid-body rotationMedium
n = 3000 rpmP = 47 kW

A shaft transmits 47 kW at 3000 rpm. Find the torque T in the shaft.

P = 47 kWn = 3000 rpm
T = N·m
14.Rigid-body rotationHard
0.9 m0.25 mn1​ = 40 rpm

A person stands on a frictionless turntable and holds a 3 kg dumbbell in each hand, 0.9 m from the axis. The person and turntable alone have a moment of inertia of 4.5 kg·m² about the axis. They turn at 40 rpm, then pull the dumbbells in to 0.25 m from the axis. Treat the dumbbells as point masses. Find the new speed n2 in rpm.

I0 = 4.5 kg·m²m = 2 × 3 kgr1 = 0.9 mr2 = 0.25 mn1 = 40 rpm
n2 = rpm
15.Gears & gear trainsMedium
N1​ = 40N2​ = 50

A 7.5 kW motor running at 1440 rpm drives a pinion with 40 teeth, which meshes with a gear with 50 teeth. The gear pair has an efficiency of 96%. Find the output torque T2 on the gear shaft.

P = 7.5 kWn1 = 1440 rpmN1 = 40N2 = 50η = 96%
T2 = N·m
16.Gears & gear trainsHard
Ns​ = 30ring fixedNp​ = 24nc​ = ?

In a planetary gear set the sun gear has 30 teeth and each planet gear has 24 teeth. The ring gear is held fixed and the sun is driven at 600 rpm. Find the speed nc of the planet carrier.

Ns = 30Np = 24ns = 600 rpm
nc = rpm
17.Springs & pendulumsMedium
L = 1.1 m

A simple pendulum has a length of 1.1 m. Use g = 9.81 m/s². Find its period T for small swings.

L = 1.1 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
t (s)x (cm)t = ?3.25

A body oscillates in simple harmonic motion with period 2.5 s and amplitude 13 cm. What is the shortest time t it needs to move from its maximum displacement of 13 cm to a displacement of 3.25 cm?

T = 2.5 sA = 13 cmx = 3.25 cm
t = s
19.Mechanical vibrationsMedium
k = 40 kN/mζ = 0.5m = 8 kg

An 8 kg mass on a spring with a stiffness of 40 kN/m has a viscous damper giving a damping ratio of 0.5. Find the damped natural frequency fd of its free vibration in Hz.

m = 8 kgk = 40 kN/mζ = 0.5
fd = Hz
20.Mechanical vibrationsHard
k1​ = 15k2​ = 25m = 5 kg

A 5 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 15 kN/m and the lower one k₂ = 25 kN/m. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 5 kgk1 = 15 kN/mk2 = 25 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: a = 0.7813 m/s²

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v = 180/3.6 = 50 m/s

Acceleration

a = v²/(2s) = 50²/(2·1600) = 0.7813 m/s²

Answer

a = 0.7813 m/s²
2.Kinematics

Answer: hmax = 380.4 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Powered phase

v₁ = 30·2.5 = 75 m/s
h₁ = ½·30·2.5² = 93.75 m

Free flight up

At the top the velocity is zero.

Δh = v₁²/(2g) = 75²/(2·9.81) = 286.7 m
hmax = 93.75 + 286.7 = 380.4 m

Answer

hmax = 380.4 m
3.Newton’s laws

Answer: T = 9.156 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration

The net driving force is the difference of the weights; it moves the total mass.

a = (7 − 0.5)·9.81/(7 + 0.5) = 8.502 m/s²

Tension from the lighter mass

T − m2·g = m2·a → T = 0.5·(9.81 + 8.502) = 9.156 N

Answer

T = 9.156 N
4.Newton’s laws

Answer: T = 45.25 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (53.96 − 29.43)/15.5 = 1.582 m/s²

Tension from the block on the table

T − μ·m1·g = m1·a
T = 10·1.582 + 29.43 = 45.25 N

Answer

T = 45.25 N
5.Projectile motion

Answer: H = 1.311 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 12·cos 25° = 10.88 m/s
vy = v0·sin θ = 12·sin 25° = 5.071 m/s

Highest point

At the top the vertical velocity is zero: vy² = 2gH.

H = vy²/(2g) = 5.071²/(2·9.81) = 1.311 m

Answer

H = 1.311 m
6.Projectile motion

Answer: H = 37.13 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Vertical launch speed

vy = 24·sin 40° = 15.43 m/s

Rise above the cliff

Δh = vy²/(2g) = 15.43²/(2·9.81) = 12.13 m

Height above the ground

H = 25 + 12.13 = 37.13 m

Answer

H = 37.13 m
7.Circular motion

Answer: vmax = 25.54 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.7·9.81·95) = 25.54 m/s

Answer

vmax = 25.54 m/s (91.95 km/h)
8.Circular motion

Answer: vmin = 3.836 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Tension zero at the top

m·g = m·v²/r → v = √(g·r) = √(9.81·1.5) = 3.836 m/s

Answer

vmin = 3.836 m/s
9.Work & energy

Answer: d = 63.71 m

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Speed in base units

v = 90/3.6 = 25 m/s

Energy balance

½mv² = μmg·d → d = v²/(2μg) = 25²/(2·0.5·9.81) = 63.71 m

Answer

d = 63.71 m

Doubling the speed makes the stopping distance four times longer.

10.Work & energy

Answer: x = 60.25 cm

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 98.1·(2 − 0.1·1.5) = 181.5 J

Maximum compression

½kx² = 181.5 → x = √(2·181.5/1000) = 0.6025 m = 60.25 cm

Answer

x = 60.25 cm
11.Momentum & collisions

Answer: v = 374.2 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Swing after impact

V = √(2·g·h) = √(2·9.81·0.13) = 1.597 m/s

Collision

m·v = (m + M)·V → v = (0.015 + 3.5)·1.597/0.015 = 374.2 m/s

Answer

v = 374.2 m/s
12.Momentum & collisions

Answer: Favg = 1240 N

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.4·(18 + 13) = 12.4 N·s

Average force

Favg = J/Δt = 12.4/0.01 = 1240 N

Answer

Favg = 1240 N
13.Rigid-body rotation

Answer: T = 149.6 N·m

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·3000/60 = 314.2 rad/s

Torque

T = P/ω = 47000/314.2 = 149.6 N·m

Answer

T = 149.6 N·m
14.Rigid-body rotation

Answer: n2 = 76.8 rpm

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Moments of inertia

I1 = 4.5 + 2·3·0.9² = 9.36 kg·m²
I2 = 4.5 + 2·3·0.25² = 4.875 kg·m²

Conservation of angular momentum

n2 = n1·I1/I2 = 40·9.36/4.875 = 76.8 rpm

Answer

n2 = 76.8 rpm

The kinetic energy increases: the extra energy comes from the work the person does pulling the dumbbells in.

15.Gears & gear trains

Answer: T2 = 59.68 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·1440/60 = 150.8 rad/s
T1 = P/ω₁ = 7500/150.8 = 49.74 N·m

Output torque

T2 = 49.74·50/40·0.96 = 59.68 N·m

Answer

T2 = 59.68 N·m
16.Gears & gear trains

Answer: nc = 166.7 rpm

Planetary gear sets: the speeds of sun, ring and carrier are linked by the Willis equation (ns − nc)/(nr − nc) = −Nr/Ns: seen from the carrier, the set is an ordinary train with the planets as idlers. Holding one member fixed turns the set into a single-ratio reducer.

Ring gear teeth

Nr = Ns + 2·Np = 30 + 2·24 = 78

Willis equation with the ring fixed

Set nr = 0 and solve for the carrier speed.

(600 − nc)/(0 − nc) = −78/30
nc = ns·Ns/(Ns + Nr) = 600·30/108 = 166.7 rpm

Answer

nc = 166.7 rpm

The carrier turns in the same direction as the sun.

17.Springs & pendulums

Answer: T = 2.104 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Pendulum period

T = 2π·√(1.1/9.81) = 2.104 s

Answer

T = 2.104 s
18.Springs & pendulums

Answer: t = 0.5245 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = 2π/T = 2π/2.5 = 2.513 rad/s

Solve for the time

0.25 = cos(ω·t) → ω·t = arccos(0.25) = 1.318 rad
t = 1.318/2.513 = 0.5245 s

Answer

t = 0.5245 s
19.Mechanical vibrations

Answer: fd = 9.746 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(40000/8) = 70.71 rad/s
fn = 70.71/(2π) = 11.25 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 11.25·√(1 − 0.5²) = 9.746 Hz

Answer

fd = 9.746 Hz
20.Mechanical vibrations

Answer: fn = 6.892 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.

1/keq = 1/15 + 1/25 → keq = 15·25/(15 + 25) = 9.375 kN/m

Natural frequency

ωn = √(9375/5) = 43.3 rad/s
fn = 43.3/(2π) = 6.892 Hz

Answer

fn = 6.892 Hz

ExamProblems · examproblems.com/courses/dynamics