In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Kinematics
Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h
Method
List what you know: v₀, v, a, t and s, with units.
Pick the equation that contains your three knowns and the unknown.
Choose one positive direction and give opposing quantities a minus sign.
Solve and check that the answer is physically sensible.
Newton’s laws
Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ
Method
Draw a free-body diagram with every force on the body.
Choose a positive direction along the motion.
Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
Apply ΣF = m·a along the motion; friction is μ·N against the motion.
Projectile motion
Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g
Method
Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
The horizontal motion has constant speed; the vertical motion has acceleration −g.
Find the time of flight from the vertical motion.
Use that time in the horizontal motion to find the range.
Circular motion
Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)
Work & energy
Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t
Momentum & collisions
Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv
Method
Choose a positive direction and give each velocity its sign.
Write the total momentum before: Σm·v.
For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
Set momentum before equal to momentum after and solve.
Rigid-body rotation
Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω
Method
Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.
Gears & gear trains
Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios
Springs & pendulums
Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²
Mechanical vibrations
Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2
2Practice problems
1.KinematicsMedium
A plane starts from rest and accelerates uniformly at 4 m/s² along a runway. Find its speed v after 1200 m.
v₀ = 0a = 4 m/s²s = 1200 m
v = m/s
2.KinematicsHard
A stone is dropped from rest into a well. The splash is heard 4.2 s after the stone is released. The speed of sound is 343 m/s; ignore air resistance and use g = 9.81 m/s². Find the depth d of the well.
ttotal = 4.2 svsound = 343 m/sg = 9.81 m/s²
d = m
3.Newton’s lawsMedium
An 18 kg block slides down a slope at 25° to the horizontal. The coefficient of kinetic friction is 0.3. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.
m = 18 kgθ = 25°μ = 0.3g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 120 N pulls the front 7 kg block; the 10 kg block is towed behind. The coefficient of kinetic friction is 0.2 for both blocks. Use g = 9.81 m/s². Find the tension T in the connecting string.
m1 = 10 kgm2 = 7 kgF = 120 Nμ = 0.2g = 9.81 m/s²
T = N
5.Projectile motionMedium
A ball is launched from level ground at 20° above the horizontal and lands 140 m away. Ignore air resistance and use g = 9.81 m/s². Find the launch speed v0.
θ = 20°R = 140 mg = 9.81 m/s²
v0 = m/s
6.Projectile motionHard
A ball is launched at 45° above horizontal from the top of a 35 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.
v0 = 25 m/sθ = 45°h = 35 mg = 9.81 m/s²
t = s
7.Circular motionMedium
A road engineer wants cars to take a curve of radius 120 m at 50 km/h without relying on friction. Use g = 9.81 m/s². Find the banking angle θ.
r = 120 mv = 50 km/hg = 9.81 m/s²
θ = °
8.Circular motionHard
A curve of radius 250 m is banked at 18°, and the coefficient of static friction between tyres and road is 0.2. Use g = 9.81 m/s². Find the highest speed vmax at which a car can take the curve without sliding up and out.
r = 250 mθ = 18°μs = 0.2g = 9.81 m/s²
vmax = m/s
9.Work & energyMedium
A block slides from rest down a slope at 30° to the horizontal. The coefficient of kinetic friction is 0.1. Find its speed v after it has slid 9 m along the slope.
θ = 30°μ = 0.1d = 9 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
A 3 kg block rests on a rough horizontal table (μ = 0.1). A light string runs from it over a smooth pulley at the edge of the table to a hanging 4 kg block. The system is released from rest. Find the speed v of the blocks after the hanging block has dropped 1.5 m.
m1 = 3 kgm2 = 4 kgμ = 0.1d = 1.5 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
A 3.5 kg glider moving at 4 m/s makes a perfectly elastic head-on collision with a 1 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).
m1 = 3.5 kgm2 = 1 kgv1 = 4 m/sv2 = 0
v′1 = m/s
12.Momentum & collisionsHard
A 0.6 kg ball hits a wall at 21 m/s and bounces straight back at 7 m/s. The contact lasts 10 ms. Find the average force Favg of the wall on the ball.
m = 0.6 kgvin = 21 m/svout = 7 m/sΔt = 10 ms
Favg = N
13.Rigid-body rotationMedium
A uniform slender rod of mass 5.5 kg and length 1.6 m is pinned at one end and held horizontal. It is released from rest. Use g = 9.81 m/s². Find the vertical force R that the pin exerts on the rod just after release.
m = 5.5 kgL = 1.6 mg = 9.81 m/s²
R = N
14.Rigid-body rotationHard
A solid cylinder of mass 0.5 kg rolls without slipping at 2 m/s. Find its total kinetic energy Ek.
m = 0.5 kgv = 2 m/sI = ½·m·r²
Ek = J
15.Gears & gear trainsMedium
A 2.2 kW motor at 960 rpm drives a worm with 1 start(s). The worm wheel has 60 teeth and the drive has an efficiency of 65%. Find the output torque Tw on the wheel shaft.
z = 1Nw = 60n = 960 rpmP = 2.2 kWη = 65%
Tw = N·m
16.Gears & gear trainsHard
In a compound gear train, gear A (32 teeth) on the input shaft turns at 960 rpm and drives gear B (80 teeth). Gear C (12 teeth) is fixed to the same shaft as B and drives gear D on the output shaft. The output must turn at 288 rpm. How many teeth ND must gear D have?
nin = 960 rpmA = 32B = 80C = 12nout = 288 rpm
ND =
17.Springs & pendulumsMedium
A 3.1 kg mass on a spring with k = 430 N/m oscillates on a frictionless surface with an amplitude of 8 cm. Find its speed v when it is 7 cm from equilibrium.
m = 3.1 kgk = 430 N/mA = 8 cmx = 7 cm
v = m/s
18.Springs & pendulumsHard
A 0.2 kg mass is attached to the lower end of an unstretched vertical spring with k = 320 N/m and released from rest. Use g = 9.81 m/s². Find the greatest extension xmax of the spring in cm.
m = 0.2 kgk = 320 N/mg = 9.81 m/s²
xmax = cm
19.Mechanical vibrationsMedium
A 10 kg mass is supported by a spring with a stiffness of 10 kN/m and a viscous damper with a damping coefficient of 250 N·s/m. Find the damping ratio ζ.
m = 10 kgk = 10 kN/mc = 250 N·s/m
ζ =
20.Mechanical vibrationsHard
A 40 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 10 kN/m and the lower one k₂ = 12 kN/m. Find the equivalent stiffness keq of the spring system in kN/m.
m = 40 kgk1 = 10 kN/mk2 = 12 kN/m
keq = kN/m
3Solutions
1.Kinematics
Answer: v = 97.98 m/s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Speed after the distance
v = √(2·a·s) = √(2·4·1200) = 97.98 m/s
Answer
v = 97.98 m/s
(352.7 km/h)
2.Kinematics
Answer: d = 77.47 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Two parts of the time
½·9.81·t₁² = 343·(4.2 − t₁)
4.905·t₁² + 343·t₁ − 1441 = 0
Fall time
Only the positive root is physical.
t₁ = (−343 + √(343² + 4·4.905·1441))/(2·4.905) = 3.974 s
Depth
d = ½·9.81·3.974² = 77.47 m
Answer
d = 77.47 m
3.Newton’s laws
Answer: a = 1.479 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
With the same μ on both blocks, friction drops out: T = F·m₁/(m₁ + m₂).
5.Projectile motion
Answer: v0 = 46.22 m/s
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Solve the range formula for v₀
v₀ = √(g·R/sin 2θ) = √(9.81·140/sin 40°) = 46.22 m/s
Answer
v0 = 46.22 m/s
6.Projectile motion
Answer: t = 5.024 s
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 25·cos 45° = 17.68 m/s
vy = v0·sin θ = 25·sin 45° = 17.68 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 35 + 17.68·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (17.68 + √(312.5 + 686.7))/9.81 = 5.024 s
Answer
t = 5.024 s
7.Circular motion
Answer: θ = 9.306 °
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Units
v = 50/3.6 = 13.89 m/s
Banking angle
tan θ = v²/(r·g) = 13.89²/(120·9.81) = 0.1639
θ = 9.306°
Answer
θ = 9.306°
8.Circular motion
Answer: vmax = 37.11 m/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Force balances
Friction points down the slope.
N·(sin θ + μ·cos θ) = m·v²/r
N·(cos θ − μ·sin θ) = m·g
Speed
v = √(250·9.81·0.4992/0.8893) = 37.11 m/s
Answer
vmax = 37.11 m/s
(133.6 km/h)
9.Work & energy
Answer: v = 8.544 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy balance along the slope
The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.
½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·9·(0.5 − 0.1·0.866)) = 8.544 m/s
Answer
v = 8.544 m/s
10.Work & energy
Answer: v = 3.944 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy released and lost
m₂g·d = 39.24·1.5 = 58.86 J
μ·m₁g·d = 0.1·29.43·1.5 = 4.415 J
Kinetic energy of both blocks
½(m₁ + m₂)v² = 54.45 → v = √(2·54.45/7) = 3.944 m/s
Answer
v = 3.944 m/s
11.Momentum & collisions
Answer: v′1 = 2.222 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Elastic collision with a target at rest
Solving momentum and energy conservation together gives these two results.
v′1 = (3.5 − 1)/(3.5 + 1)·4 = 2.222 m/s
v′2 = 2·3.5/(3.5 + 1)·4 = 6.222 m/s
Answer
v′1 = 2.222 m/s
12.Momentum & collisions
Answer: Favg = 1680 N
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Change in momentum
J = m·Δv = 0.6·(7 + 21) = 16.8 N·s
Average force
Favg = J/Δt = 16.8/0.01 = 1680 N
Answer
Favg = 1680 N
13.Rigid-body rotation
Answer: R = 13.49 N
Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.
Moments about the pin
At the moment of release ω = 0, so there is no centripetal acceleration and the centre accelerates straight down.
Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.
Translational and rotational parts
Etrans = ½·m·v² = ½·0.5·2² = 1 J
Erot = ½·I·ω² = ½·0.5·m·r²·(v/r)² = 0.5·1 = 0.5 J
Total
Ek = 1 + 0.5 = 1.5 J
Answer
Ek = 1.5 J
15.Gears & gear trains
Answer: Tw = 853.5 N·m
Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.
Wheel speed
nw = n·z/Nw = 960·1/60 = 16 rpm
Output torque
ωw = 2π·16/60 = 1.676 rad/s
Tw = η·P/ωw = 0.65·2200/1.676 = 853.5 N·m
Answer
Tw = 853.5 N·m
16.Gears & gear trains
Answer: ND = 16
Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.
Intermediate shaft speed
nB = nC = 960·32/80 = 384 rpm
Teeth on gear D
ND = C·nC/nout = 12·384/288 = 16
Answer
ND = 16
17.Springs & pendulums
Answer: v = 0.4561 m/s
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Angular frequency
ω = √(430/3.1) = 11.78 rad/s
Speed at x
v = ω·√(A² − x²) = 11.78·√(0.08² − 0.07²) = 0.4561 m/s
Answer
v = 0.4561 m/s
18.Springs & pendulums
Answer: xmax = 1.226 cm
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Equilibrium and amplitude
x₀ = m·g/k = 0.2·9.81/320 = 0.006131 m = A
Lowest point
xmax = 2A = 0.01226 m = 1.226 cm
Answer
xmax = 1.226 cm
19.Mechanical vibrations
Answer: ζ = 0.3953
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Critical damping
cc = 2·√(k·m) = 2·√(10000·10) = 632.5 N·s/m
Damping ratio
ζ = c/cc = 250/632.5 = 0.3953
Answer
ζ = 0.3953
ζ < 1, so the system is underdamped and oscillates as it decays.
20.Mechanical vibrations
Answer: keq = 5.455 kN/m
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Equivalent stiffness
Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.