In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Kinematics
Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h
Method
List what you know: v₀, v, a, t and s, with units.
Pick the equation that contains your three knowns and the unknown.
Choose one positive direction and give opposing quantities a minus sign.
Solve and check that the answer is physically sensible.
Newton’s laws
Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ
Method
Draw a free-body diagram with every force on the body.
Choose a positive direction along the motion.
Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
Apply ΣF = m·a along the motion; friction is μ·N against the motion.
Projectile motion
Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g
Method
Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
The horizontal motion has constant speed; the vertical motion has acceleration −g.
Find the time of flight from the vertical motion.
Use that time in the horizontal motion to find the range.
Circular motion
Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)
Work & energy
Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t
Momentum & collisions
Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv
Method
Choose a positive direction and give each velocity its sign.
Write the total momentum before: Σm·v.
For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
Set momentum before equal to momentum after and solve.
Rigid-body rotation
Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω
Method
Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.
Gears & gear trains
Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios
Springs & pendulums
Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²
Mechanical vibrations
Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2
2Practice problems
1.KinematicsMedium
A plane needs a speed of 240 km/h to take off and the usable runway is 800 m long. Starting from rest, what constant acceleration a does it need?
v₀ = 0v = 240 km/hs = 800 m
a = m/s²
2.KinematicsHard
A ball is thrown straight up at 13 m/s from the edge of a roof 20 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.
v₀ = 13 m/sh₀ = 20 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
An 11 kg block slides down a slope at 25° to the horizontal. The coefficient of kinetic friction is 0.15. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.
m = 11 kgθ = 25°μ = 0.15g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
A 4 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 6 kg mass. The coefficient of kinetic friction between block and table is 0.25. Use g = 9.81 m/s². Find the acceleration a of the system.
m1 = 4 kgm2 = 6 kgμ = 0.25g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
A ball is launched at 60° above horizontal from level ground. Ignore air resistance. Find the maximum height H the ball reaches.
v0 = 20 m/sθ = 60°g = 9.81 m/s²
H = m
6.Projectile motionHard
A ball is launched at 25° above horizontal from the top of a 20 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.
v0 = 12 m/sθ = 25°h = 20 mg = 9.81 m/s²
t = s
7.Circular motionMedium
A car takes a flat curve of radius 55 m. The coefficient of static friction between tyres and road is 0.3. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.
r = 55 mμs = 0.3g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
A 0.4 kg ball on a string 1.4 m long is swung in a vertical circle. At the lowest point it moves at 5 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.
m = 0.4 kgr = 1.4 mv = 5 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
A block slides from rest down a slope at 45° to the horizontal. The coefficient of kinetic friction is 0.15. Find its speed v after it has slid 8 m along the slope.
θ = 45°μ = 0.15d = 8 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
A 2 kg block starts from rest at the bottom of a 35° slope and is pulled up the slope by a constant force of 25 N parallel to the slope. The coefficient of kinetic friction is 0.25. Find the speed v of the block after it has moved 3 m up the slope.
A 2.5 kg glider moving at 6 m/s makes a perfectly elastic head-on collision with a 1.5 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).
m1 = 2.5 kgm2 = 1.5 kgv1 = 6 m/sv2 = 0
v′1 = m/s
12.Momentum & collisionsHard
At a crossing a 1000 kg car travelling east at 11 m/s collides with a 1100 kg car travelling north at 17 m/s. The cars lock together. Find the direction θ of the wreck just after the collision, measured north of east.
m1 = 1000 kgv1 = 11 m/s (E)m2 = 1100 kgv2 = 17 m/s (N)
θ = °
13.Rigid-body rotationMedium
A uniform slender rod of mass 18 kg and length 2.2 m is pinned at one end and held horizontal. It is released from rest. Use g = 9.81 m/s². Find the vertical force R that the pin exerts on the rod just after release.
m = 18 kgL = 2.2 mg = 9.81 m/s²
R = N
14.Rigid-body rotationHard
A uniform slender rod of mass 5.5 kg and length 1.7 m hangs at rest from a frictionless pivot at its top end. A 35 g bullet moving horizontally at 120 m/s hits the rod 1.68 m below the pivot and stays embedded. Use g = 9.81 m/s². Find the largest angle φ from the vertical through which the rod swings.
M = 5.5 kgL = 1.7 mm = 35 gv = 120 m/sd = 1.68 mg = 9.81 m/s²
φ = °
15.Gears & gear trainsMedium
A 2.2 kW motor running at 2900 rpm drives a pinion with 12 teeth, which meshes with a gear with 20 teeth. The gear pair has an efficiency of 96%. Find the output torque T2 on the gear shaft.
P = 2.2 kWn1 = 2900 rpmN1 = 12N2 = 20η = 96%
T2 = N·m
16.Gears & gear trainsHard
A 2.2 kW motor at 1440 rpm drives gear A (24 teeth), which meshes with gear B (48 teeth). Gear C (45 teeth) on the same shaft as B drives gear D (50 teeth) on the output shaft. Each gear mesh has an efficiency of 96%. Find the output torque Tout.
A simple pendulum has a length of 0.9 m. Use g = 9.81 m/s². Find its period T for small swings.
L = 0.9 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
A 1.6 kg mass on a spring with k = 160 N/m is pulled 10 cm from equilibrium and released. Find its maximum speed vmax.
m = 1.6 kgk = 160 N/mA = 10 cm
vmax = m/s
19.Mechanical vibrationsMedium
A 2 kg mass is supported by a spring with a stiffness of 100 kN/m and a viscous damper with a damping coefficient of 40 N·s/m. Find the damping ratio ζ.
m = 2 kgk = 100 kN/mc = 40 N·s/m
ζ =
20.Mechanical vibrationsHard
A 25 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 10 kN/m and k₂ = 100 kN/m. The mass stays level. Find the equivalent stiffness keq of the spring system in kN/m.
m = 25 kgk1 = 10 kN/mk2 = 100 kN/m
keq = kN/m
3Solutions
1.Kinematics
Answer: a = 2.778 m/s²
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v = 240/3.6 = 66.67 m/s
Acceleration
a = v²/(2s) = 66.67²/(2·800) = 2.778 m/s²
Answer
a = 2.778 m/s²
2.Kinematics
Answer: t = 3.74 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equation of motion
Up is positive and the ground is h₀ below the starting point.
−20 = 13·t − ½·9.81·t²
4.905·t² − 13·t − 20 = 0
Solve the quadratic
Only the positive root is physical.
t = (13 + √(13² + 2·9.81·20))/9.81 = 3.74 s
Answer
t = 3.74 s
3.Newton’s laws
Answer: a = 2.812 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 20·cos 60° = 10 m/s
vy = v0·sin θ = 20·sin 60° = 17.32 m/s
Highest point
At the top the vertical velocity is zero: vy² = 2gH.
H = vy²/(2g) = 17.32²/(2·9.81) = 15.29 m
Answer
H = 15.29 m
6.Projectile motion
Answer: t = 2.601 s
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 12·cos 25° = 10.88 m/s
vy = v0·sin θ = 12·sin 25° = 5.071 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 20 + 5.071·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (5.071 + √(25.72 + 392.4))/9.81 = 2.601 s
Answer
t = 2.601 s
7.Circular motion
Answer: vmax = 12.72 m/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Friction provides the centripetal force
m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.3·9.81·55) = 12.72 m/s
Answer
vmax = 12.72 m/s (45.8 km/h)
8.Circular motion
Answer: T = 11.07 N
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Forces at the lowest point
Towards the centre (up) is positive.
T − m·g = m·v²/r
T = 0.4·9.81 + 0.4·5²/1.4 = 3.924 + 7.143 = 11.07 N
Answer
T = 11.07 N
9.Work & energy
Answer: v = 9.713 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy balance along the slope
The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.
½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·8·(0.7071 − 0.15·0.7071)) = 9.713 m/s
Answer
v = 9.713 m/s
10.Work & energy
Answer: v = 5.402 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Forces along the slope
m·g = 2·9.81 = 19.62 N
mg·sin θ = 11.25 N
μ·mg·cos θ = 4.018 N
Work–energy
½mv² = (25 − 15.27)·3 = 29.19 J
v = √(2·29.19/2) = 5.402 m/s
Answer
v = 5.402 m/s
11.Momentum & collisions
Answer: v′1 = 1.5 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Elastic collision with a target at rest
Solving momentum and energy conservation together gives these two results.
v′1 = (2.5 − 1.5)/(2.5 + 1.5)·6 = 1.5 m/s
v′2 = 2·2.5/(2.5 + 1.5)·6 = 7.5 m/s
Answer
v′1 = 1.5 m/s
12.Momentum & collisions
Answer: θ = 59.53 °
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Momentum components
px = 1000·11 = 11000 kg·m/s
py = 1100·17 = 18700 kg·m/s
Direction
tan θ = py/px = 1.7 → θ = 59.53°
Answer
θ = 59.53°
13.Rigid-body rotation
Answer: R = 44.15 N
Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.
Moments about the pin
At the moment of release ω = 0, so there is no centripetal acceleration and the centre accelerates straight down.
Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.
Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.
Motor torque
ω₁ = 2π·2900/60 = 303.7 rad/s
T1 = P/ω₁ = 2200/303.7 = 7.244 N·m
Output torque
T2 = 7.244·20/12·0.96 = 11.59 N·m
Answer
T2 = 11.59 N·m
16.Gears & gear trains
Answer: Tout = 29.88 N·m
Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.
Output speed
nout = 1440·(24/48)·(45/50) = 648 rpm
ωout = 2π·648/60 = 67.86 rad/s
Output power and torque
Pout = 2200·0.96² = 2028 W
Tout = Pout/ωout = 2028/67.86 = 29.88 N·m
Answer
Tout = 29.88 N·m
17.Springs & pendulums
Answer: T = 1.903 s
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Pendulum period
T = 2π·√(0.9/9.81) = 1.903 s
Answer
T = 1.903 s
18.Springs & pendulums
Answer: vmax = 1 m/s
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Angular frequency
ω = √(160/1.6) = 10 rad/s
Maximum speed
vmax = A·ω = 0.1·10 = 1 m/s
Answer
vmax = 1 m/s
19.Mechanical vibrations
Answer: ζ = 0.04472
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Critical damping
cc = 2·√(k·m) = 2·√(100000·2) = 894.4 N·s/m
Damping ratio
ζ = c/cc = 40/894.4 = 0.04472
Answer
ζ = 0.04472
ζ < 1, so the system is underdamped and oscillates as it decays.
20.Mechanical vibrations
Answer: keq = 110 kN/m
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Equivalent stiffness
Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.