Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)2.857 s10

A car driving at 36 km/h brakes with a constant deceleration of 3.5 m/s² until it stops. Find the braking distance s.

v₀ = 36 km/ha = −3.5 m/s²v = 0
s = m
2.KinematicsHard
v₀ = 13 m/s15 m

A ball is thrown straight up at 13 m/s from the edge of a roof 15 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 13 m/sh₀ = 15 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
θ = 40°45 kgF = ?

A 45 kg box is pushed up a ramp at 40° to the horizontal at constant speed, by a force parallel to the ramp. The coefficient of kinetic friction is 0.25. Use g = 9.81 m/s². Find the pushing force F.

m = 45 kgθ = 40°μ = 0.25g = 9.81 m/s²
F = N
4.Newton’s lawsHard
11 kg10 kgTF = 145 Nμ = 0.3

Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 145 N pulls the front 10 kg block; the 11 kg block is towed behind. The coefficient of kinetic friction is 0.3 for both blocks. Use g = 9.81 m/s². Find the tension T in the connecting string.

m1 = 11 kgm2 = 10 kgF = 145 Nμ = 0.3g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = 36 m/s50°rangeH = ?

A ball is launched at 50° above horizontal from level ground. Ignore air resistance. Find the maximum height H the ball reaches.

v0 = 36 m/sθ = 50°g = 9.81 m/s²
H = m
6.Projectile motionHard
h = 10 mv0​ = 19 m/s40°x = ?

A ball is launched at 40° above horizontal from the top of a 10 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 19 m/sθ = 40°h = 10 mg = 9.81 m/s²
x = m
7.Circular motionMedium
r = 120 mvmax​ = ?

A car takes a flat curve of radius 120 m. The coefficient of static friction between tyres and road is 0.6. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 120 mμs = 0.6g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
r = 1.1 mv = 3 m/s

A 1.1 kg ball on a string 1.1 m long is swung in a vertical circle. At the lowest point it moves at 3 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.

m = 1.1 kgr = 1.1 mv = 3 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
90°L = 0.8 m1 kg

A 1 kg ball hangs on a light string of length 0.8 m. It is pulled aside until the string makes 90° with the vertical and released from rest. Find the tension T in the string when the ball passes the lowest point.

m = 1 kgL = 0.8 mθ = 90°g = 9.81 m/s²
T = N
10.Work & energyHard
h = 1 mL = 2 mμ = 0.15k = 2000 N/m

A 5 kg block is released from rest at height 1 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 2 m long (μ = 0.15) and then runs onto a spring (k = 2000 N/m) on a smooth surface. Find the maximum compression x of the spring.

m = 5 kgh = 1 mL = 2 mμ = 0.15k = 2000 N/mg = 9.81 m/s²
x = cm
11.Momentum & collisionsMedium
1.5 kg5 m/s3.5 kg

A 1.5 kg glider moving at 5 m/s makes a perfectly elastic head-on collision with a 3.5 kg glider at rest on a frictionless track. Find the velocity v′2 of the second glider after the collision.

m1 = 1.5 kgm2 = 3.5 kgv1 = 5 m/sv2 = 0
v′2 = m/s
12.Momentum & collisionsHard
17 m/s18 m/s

A 0.4 kg ball hits a wall at 17 m/s and bounces straight back at 18 m/s. The contact lasts 5 ms. Find the magnitude of the impulse J the wall gives the ball.

m = 0.4 kgvin = 17 m/svout = 18 m/sΔt = 5 ms
J = N·s
13.Rigid-body rotationMedium
L = 2.6 mm = 17.5 kgα

A uniform slender rod of mass 17.5 kg and length 2.6 m is pinned at one end and held horizontal. It is released from rest. Use g = 9.81 m/s². Find the vertical force R that the pin exerts on the rod just after release.

m = 17.5 kgL = 2.6 mg = 9.81 m/s²
R = N
14.Rigid-body rotationHard
disc: 6 kgring: 14 kgn1​ = 950 rpm

A uniform solid disc (mass 6 kg, radius 0.3 m) spins freely at 950 rpm about a vertical frictionless shaft. A thin ring of mass 14 kg and the same radius is dropped onto it from rest, centred on the shaft, and the two quickly spin together. How much kinetic energy ΔE is lost in the process?

Mdisc = 6 kgMring = 14 kgR = 0.3 mn1 = 950 rpm
ΔE = J
15.Gears & gear trainsMedium
N1​ = ?N2​

Two parallel shafts are 100 mm apart. They must be connected by a pair of spur gears with a module of 2 mm and a speed reduction of 3 : 1. How many teeth N1 must the pinion have?

a = 100 mmm = 2 mmi = 3
N1 =
16.Gears & gear trainsHard
d1​ = 150 mmd2​ = 500 mm1450 rpmC = 1200 mmθ = ?

An open belt connects a 150 mm pulley and a 500 mm pulley whose centres are 1200 mm apart. Find the angle of wrap θ on the smaller pulley, in degrees.

d1 = 150 mmd2 = 500 mmC = 1200 mm
θ = °
17.Springs & pendulumsMedium
L = ?

How long must a simple pendulum be to have a period of 2.9 s? Use g = 9.81 m/s². Find L.

T = 2.9 sg = 9.81 m/s²
L = m
18.Springs & pendulumsHard
t (s)x (cm)t = ?3.3

A body oscillates in simple harmonic motion with period 3.7 s and amplitude 11 cm. What is the shortest time t it needs to move from equilibrium to a displacement of 3.3 cm?

T = 3.7 sA = 11 cmx = 3.3 cm
t = s
19.Mechanical vibrationsMedium
tx50 mm1 cycle19.3 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 50 mm is followed one cycle later by a peak of 19.3 mm. Find the damping ratio ζ.

x0 = 50 mmx1 = 19.3 mmn = 1
ζ =
20.Mechanical vibrationsHard
k1​ = 40k2​ = 12m = 100 kg

A 100 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 40 kN/m and k₂ = 12 kN/m. The mass stays level. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 100 kgk1 = 40 kN/mk2 = 12 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: s = 14.29 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 36/3.6 = 10 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 10²/(2·3.5) = 14.29 m

Answer

s = 14.29 m
2.Kinematics

Answer: t = 3.519 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−15 = 13·t − ½·9.81·t²
4.905·t² − 13·t − 15 = 0

Solve the quadratic

Only the positive root is physical.

t = (13 + √(13² + 2·9.81·15))/9.81 = 3.519 s

Answer

t = 3.519 s
3.Newton’s laws

Answer: F = 368.3 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Constant speed: the forces balance.

F = m·g·sin θ + μ·m·g·cos θ

Pushing force

F = 283.8 + 84.54 = 368.3 N

Answer

F = 368.3 N
4.Newton’s laws

Answer: T = 75.95 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Whole system

a = (F − μ·(m1 + m2)·g)/(m1 + m2) = (145 − 61.8)/21 = 3.962 m/s²

Rear block alone

T = m1·(a + μ·g) = 11·(3.962 + 2.943) = 75.95 N

Answer

T = 75.95 N

With the same μ on both blocks, friction drops out: T = F·m₁/(m₁ + m₂).

5.Projectile motion

Answer: H = 38.76 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 36·cos 50° = 23.14 m/s
vy = v0·sin θ = 36·sin 50° = 27.58 m/s

Highest point

At the top the vertical velocity is zero: vy² = 2gH.

H = vy²/(2g) = 27.58²/(2·9.81) = 38.76 m

Answer

H = 38.76 m
6.Projectile motion

Answer: x = 45.69 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 19·cos 40° = 14.55 m/s
vy = v0·sin θ = 19·sin 40° = 12.21 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 10 + 12.21·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (12.21 + √(149.2 + 196.2))/9.81 = 3.139 s

Horizontal distance

x = vx·t = 14.55·3.139 = 45.69 m

Answer

x = 45.69 m
7.Circular motion

Answer: vmax = 26.58 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.6·9.81·120) = 26.58 m/s

Answer

vmax = 26.58 m/s (95.68 km/h)
8.Circular motion

Answer: T = 19.79 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the lowest point

Towards the centre (up) is positive.

T − m·g = m·v²/r
T = 1.1·9.81 + 1.1·3²/1.1 = 10.79 + 9 = 19.79 N

Answer

T = 19.79 N
9.Work & energy

Answer: T = 29.43 N

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.

Speed at the bottom

v² = 2gL(1 − cos θ) = 2·9.81·0.8·(1 − cos 90°) = 15.7 m²/s²

Forces at the bottom

m·g = 1·9.81 = 9.81 N
T = mg + mv²/L = 9.81 + 1·15.7/0.8 = 29.43 N

Answer

T = 29.43 N

Check: T = mg(3 − 2cos θ) = 29.43 N.

10.Work & energy

Answer: x = 18.53 cm

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 49.05·(1 − 0.15·2) = 34.34 J

Maximum compression

½kx² = 34.34 → x = √(2·34.34/2000) = 0.1853 m = 18.53 cm

Answer

x = 18.53 cm
11.Momentum & collisions

Answer: v′2 = 3 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (1.5 − 3.5)/(1.5 + 3.5)·5 = −2 m/s
v′2 = 2·1.5/(1.5 + 3.5)·5 = 3 m/s

Answer

v′2 = 3 m/s
12.Momentum & collisions

Answer: J = 14 N·s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.4·(18 + 17) = 14 N·s

Answer

J = 14 N·s
13.Rigid-body rotation

Answer: R = 42.92 N

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Moments about the pin

At the moment of release ω = 0, so there is no centripetal acceleration and the centre accelerates straight down.

m·g·L/2 = (m·L²/3)·α → α = 3g/(2L) = 3·9.81/(2·2.6) = 5.66 rad/s²

Vertical forces

aG = α·L/2 = 7.357 m/s²
m·g − R = m·aG → R = 17.5·(9.81 − 7.357) = 42.92 N

Answer

R = 42.92 N

R = m·g/4, independent of the length.

14.Rigid-body rotation

Answer: ΔE = 1100 J

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Moments of inertia

I1 = ½·6·0.3² = 0.27 kg·m²
I2 = 14·0.3² = 1.26 kg·m²

Conservation of angular momentum

n2 = n1·I1/(I1 + I2) = 950·0.27/1.53 = 167.6 rpm

Kinetic energy before and after

E1 = ½·0.27·99.48² = 1336 J
E2 = ½·1.53·17.56² = 235.8 J
ΔE = 1336 − 235.8 = 1100 J

Answer

ΔE = 1100 J
15.Gears & gear trains

Answer: N1 = 25

Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.

Total number of teeth

N1 + N2 = 2a/m = 2·100/2 = 100

Split by the ratio

N1 = 100/(1 + 3) = 25

Answer

N1 = 25
16.Gears & gear trains

Answer: θ = 163.2 °

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Belt angle

asin(0.1458) = 8.386°

Angle of wrap

θ = 180 − 2·8.386 = 163.2°

Answer

θ = 163.2°
17.Springs & pendulums

Answer: L = 2.09 m

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Solve for the length

L = g·(T/2π)² = 9.81·(2.9/2π)² = 2.09 m

Answer

L = 2.09 m
18.Springs & pendulums

Answer: t = 0.1794 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = 2π/T = 2π/3.7 = 1.698 rad/s

Solve for the time

0.3 = sin(ω·t) → ω·t = arcsin(0.3) = 0.3047 rad
t = 0.3047/1.698 = 0.1794 s

Answer

t = 0.1794 s
19.Mechanical vibrations

Answer: ζ = 0.1498

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/1)·ln(50/19.3) = 0.9519

Damping ratio

ζ = δ/√(4π² + δ²) = 0.9519/√(39.48 + 0.9061) = 0.1498

Answer

ζ = 0.1498
20.Mechanical vibrations

Answer: fn = 3.629 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 40 + 12 = 52 kN/m

Natural frequency

ωn = √(52000/100) = 22.8 rad/s
fn = 22.8/(2π) = 3.629 Hz

Answer

fn = 3.629 Hz

ExamProblems · examproblems.com/courses/dynamics