Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)5.556 s33.33

A car driving at 120 km/h brakes with a constant deceleration of 6 m/s² until it stops. Find the braking distance s.

v₀ = 120 km/ha = −6 m/s²v = 0
s = m
2.KinematicsHard
v₀ = 20 m/s40 m

A ball is thrown straight up at 20 m/s from the edge of a roof 40 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 20 m/sh₀ = 40 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
θ = 45°a = ?m = 4 kg

A 4 kg block slides down a slope at 45° to the horizontal. The coefficient of kinetic friction is 0.2. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 4 kgθ = 45°μ = 0.2g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 5 kg4.5 kgμ = 0.3

A 5 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 4.5 kg mass. The coefficient of kinetic friction between block and table is 0.3. Use g = 9.81 m/s². Find the acceleration a of the system.

m1 = 5 kgm2 = 4.5 kgμ = 0.3g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
v0​ = 38 m/s20°rangeH = ?

A ball is launched at 20° above horizontal from level ground. Ignore air resistance. Find the maximum height H the ball reaches.

v0 = 38 m/sθ = 20°g = 9.81 m/s²
H = m
6.Projectile motionHard
h = 35 mv0​ = 10 m/s50°range

A ball is launched at 50° above horizontal from the top of a 35 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 10 m/sθ = 50°h = 35 mg = 9.81 m/s²
t = s
7.Circular motionMedium
L = 1.4 m60°

A small ball on a string of length 1.4 m moves in a horizontal circle so that the string makes a constant angle of 60° with the vertical (a conical pendulum). Use g = 9.81 m/s². Find the speed v of the ball.

L = 1.4 mθ = 60°g = 9.81 m/s²
v = m/s
8.Circular motionHard
r = 0.6 m8.5 m/svtop​ = ?

A 1.3 kg ball on a light string 0.6 m long is swung in a vertical circle. At the lowest point its speed is 8.5 m/s. Ignore air resistance and use g = 9.81 m/s². Find the tension Ttop in the string at the highest point.

m = 1.3 kgr = 0.6 mvbottom = 8.5 m/sg = 9.81 m/s²
Ttop = N
9.Work & energyMedium
72 km/h3°1000 kg

A 1000 kg car drives up a 3° slope at a constant 72 km/h. Air resistance and rolling resistance together amount to 750 N. Find the power P the wheels must deliver, in kW.

m = 1000 kgθ = 3°Fr = 750 Nv = 72 km/hg = 9.81 m/s²
P = kW
10.Work & energyHard
4 kg2 kgμ = 0.15d = 2 m

A 4 kg block rests on a rough horizontal table (μ = 0.15). A light string runs from it over a smooth pulley at the edge of the table to a hanging 2 kg block. The system is released from rest. Find the speed v of the blocks after the hanging block has dropped 2 m.

m1 = 4 kgm2 = 2 kgμ = 0.15d = 2 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
13 kg42 m/s1 kgv′2​ = ?

A 14 kg projectile moving horizontally at 30 m/s explodes into two fragments that move along the same line. The 13 kg fragment continues forwards at 42 m/s. Find the velocity v′2 of the 1 kg fragment (positive in the original direction).

M = 14 kgu = 30 m/sm1 = 13 kgv′1 = 42 m/sm2 = 1 kg
v′2 = m/s
12.Momentum & collisionsHard
22 m/s15 m/s

A 0.3 kg ball hits a wall at 22 m/s and bounces straight back at 15 m/s. The contact lasts 5 ms. Find the magnitude of the impulse J the wall gives the ball.

m = 0.3 kgvin = 22 m/svout = 15 m/sΔt = 5 ms
J = N·s
13.Rigid-body rotationMedium
n = 3000 rpmTb​ = 50 N·mI = 34.5 kg·m²

A flywheel with a moment of inertia of 34.5 kg·m² spins at 3000 rpm. A brake applies a constant friction torque of 50 N·m. How long t does it take to stop?

I = 34.5 kg·m²n = 3000 rpmTb = 50 N·m
t = s
14.Rigid-body rotationHard
θ = 35°a

A solid sphere rolls without slipping down a slope inclined at 35° to the horizontal. Use g = 9.81 m/s². Find the acceleration a of its centre.

θ = 35°I = (2/5)·m·r²g = 9.81 m/s²
a = m/s²
15.Gears & gear trainsMedium
N1​ = 24N2​ = 45

A 1.5 kW motor running at 1450 rpm drives a pinion with 24 teeth, which meshes with a gear with 45 teeth. The gear pair has an efficiency of 97%. Find the output torque T2 on the gear shaft.

P = 1.5 kWn1 = 1450 rpmN1 = 24N2 = 45η = 97%
T2 = N·m
16.Gears & gear trainsHard
A = 40B = 50C = 18D = ?

In a compound gear train, gear A (40 teeth) on the input shaft turns at 3000 rpm and drives gear B (50 teeth). Gear C (18 teeth) is fixed to the same shaft as B and drives gear D on the output shaft. The output must turn at 720 rpm. How many teeth ND must gear D have?

nin = 3000 rpmA = 40B = 50C = 18nout = 720 rpm
ND =
17.Springs & pendulumsMedium
t (s)x (cm)1.4 s

A 0.9 kg mass on a spring with k = 50 N/m is pulled 11 cm in the positive direction and released from rest at t = 0. Find its velocity v at t = 1.4 s (with sign).

m = 0.9 kgk = 50 N/mA = 11 cmt = 1.4 s
v = m/s
18.Springs & pendulumsHard
3.6 kgk = 230 N/mA = 8 cm

A 3.6 kg mass on a spring with k = 230 N/m is pulled 8 cm from equilibrium and released. Find its maximum speed vmax.

m = 3.6 kgk = 230 N/mA = 8 cm
vmax = m/s
19.Mechanical vibrationsMedium
k = 15 kN/mζ = 0.6m = 80 kg

An 80 kg mass on a spring with a stiffness of 15 kN/m has a viscous damper giving a damping ratio of 0.6. Find the damped natural frequency fd of its free vibration in Hz.

m = 80 kgk = 15 kN/mζ = 0.6
fd = Hz
20.Mechanical vibrationsHard
k1​ = 10k2​ = 5k3​ = 25m = 5 kg

A 5 kg mass hangs from spring k₃ = 25 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 10 kN/m and k₂ = 5 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 5 kgk1 = 10 kN/mk2 = 5 kN/mk3 = 25 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: s = 92.59 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 120/3.6 = 33.33 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 33.33²/(2·6) = 92.59 m

Answer

s = 92.59 m
2.Kinematics

Answer: t = 5.547 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−40 = 20·t − ½·9.81·t²
4.905·t² − 20·t − 40 = 0

Solve the quadratic

Only the positive root is physical.

t = (20 + √(20² + 2·9.81·40))/9.81 = 5.547 s

Answer

t = 5.547 s
3.Newton’s laws

Answer: a = 5.549 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 45° − 0.2·cos 45°) = 9.81·(0.7071 − 0.1414) = 5.549 m/s²

Answer

a = 5.549 m/s²
4.Newton’s laws

Answer: a = 3.098 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (44.15 − 14.71)/9.5 = 3.098 m/s²

Answer

a = 3.098 m/s²
5.Projectile motion

Answer: H = 8.609 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 38·cos 20° = 35.71 m/s
vy = v0·sin θ = 38·sin 20° = 13 m/s

Highest point

At the top the vertical velocity is zero: vy² = 2gH.

H = vy²/(2g) = 13²/(2·9.81) = 8.609 m

Answer

H = 8.609 m
6.Projectile motion

Answer: t = 3.564 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 10·cos 50° = 6.428 m/s
vy = v0·sin θ = 10·sin 50° = 7.66 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 35 + 7.66·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (7.66 + √(58.68 + 686.7))/9.81 = 3.564 s

Answer

t = 3.564 s
7.Circular motion

Answer: v = 4.539 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Radius of the circle

r = L·sin θ = 1.4·sin 60° = 1.212 m

Speed

Tension and gravity together give the inward force: tan θ = v²/(r·g).

v = √(r·g·tan θ) = √(1.212·9.81·tan 60°) = 4.539 m/s

Answer

v = 4.539 m/s
8.Circular motion

Answer: Ttop = 92.78 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Speed at the top

Kinetic energy is traded for potential energy over a height 2r.

vtop² = 8.5² − 4·9.81·0.6 = 48.71 m²/s²

Forces at the top

Tension and gravity both point down, towards the centre.

T + m·g = m·vtop²/r
T = 1.3·48.71/0.6 − 1.3·9.81 = 92.78 N

Answer

Ttop = 92.78 N
9.Work & energy

Answer: P = 25.27 kW

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). Power is force times speed: P = F·v.

Driving force

m·g = 1000·9.81 = 9810 N
mg·sin θ = 9810·sin 3° = 513.4 N
F = 513.4 + 750 = 1263 N

Power

v = 72/3.6 = 20 m/s
P = F·v = 1263·20 = 25268 W = 25.27 kW

Answer

P = 25.27 kW
10.Work & energy

Answer: v = 3.026 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy released and lost

m₂g·d = 19.62·2 = 39.24 J
μ·m₁g·d = 0.15·39.24·2 = 11.77 J

Kinetic energy of both blocks

½(m₁ + m₂)v² = 27.47 → v = √(2·27.47/6) = 3.026 m/s

Answer

v = 3.026 m/s
11.Momentum & collisions

Answer: v′2 = −126 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum before

p = M·u = 14·30 = 420 kg·m/s

Momentum after

420 = 13·42 + 1·v′2
v′2 = (420 − 546)/1 = −126 m/s

Answer

v′2 = −126 m/s

The minus sign means the second fragment flies backwards.

12.Momentum & collisions

Answer: J = 11.1 N·s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.3·(15 + 22) = 11.1 N·s

Answer

J = 11.1 N·s
13.Rigid-body rotation

Answer: t = 216.8 s

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·3000/60 = 314.2 rad/s

Deceleration and time

α = Tb/I = 50/34.5 = 1.449 rad/s²
t = ω/α = 314.2/1.449 = 216.8 s

Answer

t = 216.8 s
14.Rigid-body rotation

Answer: a = 4.019 m/s²

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Equations of motion

m·g·sin θ − f = m·a
f·r = I·α = 0.4·m·r²·(a/r) → f = 0.4·m·a

Acceleration

a = g·sin θ/(1 + c) = 9.81·sin 35°/1.4 = 4.019 m/s²

Answer

a = 4.019 m/s²
15.Gears & gear trains

Answer: T2 = 17.97 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·1450/60 = 151.8 rad/s
T1 = P/ω₁ = 1500/151.8 = 9.879 N·m

Output torque

T2 = 9.879·45/24·0.97 = 17.97 N·m

Answer

T2 = 17.97 N·m
16.Gears & gear trains

Answer: ND = 60

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Intermediate shaft speed

nB = nC = 3000·40/50 = 2400 rpm

Teeth on gear D

ND = C·nC/nout = 18·2400/720 = 60

Answer

ND = 60
17.Springs & pendulums

Answer: v = 0.6944 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(50/0.9) = 7.454 rad/s
ω·t = 7.454·1.4 = 10.43 rad

Velocity

v = −A·ω·sin(ω·t) = −0.11·7.454·sin(10.43) = 0.6944 m/s

Answer

v = 0.6944 m/s
18.Springs & pendulums

Answer: vmax = 0.6394 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(230/3.6) = 7.993 rad/s

Maximum speed

vmax = A·ω = 0.08·7.993 = 0.6394 m/s

Answer

vmax = 0.6394 m/s
19.Mechanical vibrations

Answer: fd = 1.743 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(15000/80) = 13.69 rad/s
fn = 13.69/(2π) = 2.179 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 2.179·√(1 − 0.6²) = 1.743 Hz

Answer

fd = 1.743 Hz
20.Mechanical vibrations

Answer: fn = 6.892 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 10 + 5 = 15 kN/m
keq = 15·25/(15 + 25) = 9.375 kN/m

Natural frequency

ωn = √(9375/5) = 43.3 rad/s
fn = 43.3/(2π) = 6.892 Hz

Answer

fn = 6.892 Hz

ExamProblems · examproblems.com/courses/dynamics