Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)3.75 s15

A car driving at 54 km/h brakes with a constant deceleration of 4 m/s² until it stops. Find the braking distance s.

v₀ = 54 km/ha = −4 m/s²v = 0
s = m
2.KinematicsHard
a = 32 m/s²

A model rocket is launched straight up from rest. Its engine gives it a constant upward acceleration of 32 m/s² for 3 s, after which the engine stops and the rocket moves freely. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax the rocket reaches.

a = 32 m/s²t1 = 3 sg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
θ = 30°a = ?m = 15 kg

A 15 kg block slides down a slope at 30° to the horizontal. The coefficient of kinetic friction is 0.1. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 15 kgθ = 30°μ = 0.1g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
4 kg10 kgTF = 100 Nμ = 0.25

Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 100 N pulls the front 10 kg block; the 4 kg block is towed behind. The coefficient of kinetic friction is 0.25 for both blocks. Use g = 9.81 m/s². Find the tension T in the connecting string.

m1 = 4 kgm2 = 10 kgF = 100 Nμ = 0.25g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = 32 m/sθ = ?R = 95 m

A ball is launched from level ground at 32 m/s and must land 95 m away. Ignore air resistance and use g = 9.81 m/s². Find the smaller of the two possible launch angles θ.

v₀ = 32 m/sR = 95 mg = 9.81 m/s²
θ = °
6.Projectile motionHard
h = 45 mv0​ = 17 m/s20°α = ?

A ball is launched at 17 m/s and 20° above the horizontal from the top of a 45 m cliff. Ignore air resistance and use g = 9.81 m/s². At what angle α below the horizontal does it hit the ground?

v₀ = 17 m/sθ = 20°h = 45 mg = 9.81 m/s²
α = °
7.Circular motionMedium
r = 70 m17 m/s

A 1400 kg car drives over the top of a hump in the road at 17 m/s. The top of the hump is a circular arc of radius 70 m. Use g = 9.81 m/s². Find the normal force N of the road on the car at the top.

m = 1400 kgv = 17 m/sr = 70 mg = 9.81 m/s²
N = N
8.Circular motionHard
r = 1 m12 m/svtop​ = ?

A 0.3 kg ball on a light string 1 m long is swung in a vertical circle. At the lowest point its speed is 12 m/s. Ignore air resistance and use g = 9.81 m/s². Find the tension Ttop in the string at the highest point.

m = 0.3 kgr = 1 mvbottom = 12 m/sg = 9.81 m/s²
Ttop = N
9.Work & energyMedium
35°d = 13 mμ = 0.25

A 1 kg block slides 13 m down a slope at 35° to the horizontal, with a coefficient of kinetic friction of 0.25. Find the work Wf done against friction.

m = 1 kgθ = 35°μ = 0.25d = 13 mg = 9.81 m/s²
Wf = J
10.Work & energyHard
5 kg4 kgμ = 0.2d = 2 m

A 5 kg block rests on a rough horizontal table (μ = 0.2). A light string runs from it over a smooth pulley at the edge of the table to a hanging 4 kg block. The system is released from rest. Find the speed v of the blocks after the hanging block has dropped 2 m.

m1 = 5 kgm2 = 4 kgμ = 0.2d = 2 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
8 kg52 m/s12 kgv′2​ = ?

A 20 kg projectile moving horizontally at 9 m/s explodes into two fragments that move along the same line. The 8 kg fragment continues forwards at 52 m/s. Find the velocity v′2 of the 12 kg fragment (positive in the original direction).

M = 20 kgu = 9 m/sm1 = 8 kgv′1 = 52 m/sm2 = 12 kg
v′2 = m/s
12.Momentum & collisionsHard
1800 kg15 m/s1700 kg21 m/sv′ = ?

At a crossing a 1800 kg car travelling east at 15 m/s collides with a 1700 kg car travelling north at 21 m/s. The cars lock together. Find the speed v′ of the wreck just after the collision.

m1 = 1800 kgv1 = 15 m/s (E)m2 = 1700 kgv2 = 21 m/s (N)
v′ = m/s
13.Rigid-body rotationMedium
9 kgaαM = 14 kgR = 0.2 m

A 9 kg block hangs from a light cord wrapped around a pulley, a uniform solid disc of mass 14 kg and radius 0.2 m that turns on a frictionless horizontal axle. The block is released from rest. Use g = 9.81 m/s². Find the angular acceleration α of the pulley.

m = 9 kgM = 14 kgR = 0.2 mg = 9.81 m/s²
α = rad/s²
14.Rigid-body rotationHard
θ = 25°a

A solid cylinder rolls without slipping down a slope inclined at 25° to the horizontal. Use g = 9.81 m/s². Find the acceleration a of its centre.

θ = 25°I = ½·m·r²g = 9.81 m/s²
a = m/s²
15.Gears & gear trainsMedium
N1​ = 12N2​ = 72

A 2.2 kW motor running at 1500 rpm drives a pinion with 12 teeth, which meshes with a gear with 72 teeth. The gear pair has an efficiency of 96%. Find the output torque T2 on the gear shaft.

P = 2.2 kWn1 = 1500 rpmN1 = 12N2 = 72η = 96%
T2 = N·m
16.Gears & gear trainsHard
A = 40B = 60C = 36D = ?

In a compound gear train, gear A (40 teeth) on the input shaft turns at 1440 rpm and drives gear B (60 teeth). Gear C (36 teeth) is fixed to the same shaft as B and drives gear D on the output shaft. The output must turn at 480 rpm. How many teeth ND must gear D have?

nin = 1440 rpmA = 40B = 60C = 36nout = 480 rpm
ND =
17.Springs & pendulumsMedium
t (s)x (cm)1.05 s

A 1.2 kg mass on a spring with k = 370 N/m is pulled 12 cm in the positive direction and released from rest at t = 0. Find its velocity v at t = 1.05 s (with sign).

m = 1.2 kgk = 370 N/mA = 12 cmt = 1.05 s
v = m/s
18.Springs & pendulumsHard
2.1 kgk = 290 N/mA = 13 cm

A 2.1 kg mass on a spring with k = 290 N/m is pulled 13 cm from equilibrium and released. Find its maximum speed vmax.

m = 2.1 kgk = 290 N/mA = 13 cm
vmax = m/s
19.Mechanical vibrationsMedium
k = 5 kN/mζ = 0.4m = 12 kg

A 12 kg mass on a spring with a stiffness of 5 kN/m has a viscous damper giving a damping ratio of 0.4. Find the damped natural frequency fd of its free vibration in Hz.

m = 12 kgk = 5 kN/mζ = 0.4
fd = Hz
20.Mechanical vibrationsHard
k1​ = 5k2​ = 100m = 40 kg

A 40 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 5 kN/m and k₂ = 100 kN/m. The mass stays level. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 40 kgk1 = 5 kN/mk2 = 100 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: s = 28.13 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 54/3.6 = 15 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 15²/(2·4) = 28.13 m

Answer

s = 28.13 m
2.Kinematics

Answer: hmax = 613.7 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Powered phase

v₁ = 32·3 = 96 m/s
h₁ = ½·32·3² = 144 m

Free flight up

At the top the velocity is zero.

Δh = v₁²/(2g) = 96²/(2·9.81) = 469.7 m
hmax = 144 + 469.7 = 613.7 m

Answer

hmax = 613.7 m
3.Newton’s laws

Answer: a = 4.055 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 30° − 0.1·cos 30°) = 9.81·(0.5 − 0.0866) = 4.055 m/s²

Answer

a = 4.055 m/s²
4.Newton’s laws

Answer: T = 28.57 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Whole system

a = (F − μ·(m1 + m2)·g)/(m1 + m2) = (100 − 34.34)/14 = 4.69 m/s²

Rear block alone

T = m1·(a + μ·g) = 4·(4.69 + 2.453) = 28.57 N

Answer

T = 28.57 N

With the same μ on both blocks, friction drops out: T = F·m₁/(m₁ + m₂).

5.Projectile motion

Answer: θ = 32.76 °

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Range formula

R = v₀²·sin 2θ/g → sin 2θ = 9.81·95/32² = 0.9101

Angle

2θ = 65.52° → θ = 32.76°

Answer

θ = 32.76°

The other solution is 90° − θ = 57.24°.

6.Projectile motion

Answer: α = 62.18 °

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

vx = 17·cos 20° = 15.97 m/s
vy0 = 17·sin 20° = 5.814 m/s

Vertical speed at impact

Energy or v² = v₀² + 2as in the vertical direction.

vy = √(5.814² + 2·9.81·45) = 30.28 m/s

Impact angle

tan α = vy/vx = 30.28/15.97 → α = 62.18°

Answer

α = 62.18°
7.Circular motion

Answer: N = 7954 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the top

Towards the centre (down) is positive.

m·g − N = m·v²/r
N = 1400·9.81 − 1400·17²/70 = 13734 − 5780 = 7954 N

Answer

N = 7954 N

The car feels lighter: the road pushes up less than its weight.

8.Circular motion

Answer: Ttop = 28.48 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Speed at the top

Kinetic energy is traded for potential energy over a height 2r.

vtop² = 12² − 4·9.81·1 = 104.8 m²/s²

Forces at the top

Tension and gravity both point down, towards the centre.

T + m·g = m·vtop²/r
T = 0.3·104.8/1 − 0.3·9.81 = 28.48 N

Answer

Ttop = 28.48 N
9.Work & energy

Answer: Wf = 26.12 J

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Friction force

N = mg·cos θ = 9.81·0.8192 = 8.036 N
F = μN = 0.25·8.036 = 2.009 N

Work against friction

Wf = F·d = 2.009·13 = 26.12 J

Answer

Wf = 26.12 J
10.Work & energy

Answer: v = 3.617 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy released and lost

m₂g·d = 39.24·2 = 78.48 J
μ·m₁g·d = 0.2·49.05·2 = 19.62 J

Kinetic energy of both blocks

½(m₁ + m₂)v² = 58.86 → v = √(2·58.86/9) = 3.617 m/s

Answer

v = 3.617 m/s
11.Momentum & collisions

Answer: v′2 = −19.67 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum before

p = M·u = 20·9 = 180 kg·m/s

Momentum after

180 = 8·52 + 12·v′2
v′2 = (180 − 416)/12 = −19.67 m/s

Answer

v′2 = −19.67 m/s

The minus sign means the second fragment flies backwards.

12.Momentum & collisions

Answer: v′ = 12.79 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum components

px = 1800·15 = 27000 kg·m/s
py = 1700·21 = 35700 kg·m/s

Speed of the wreck

v′ = √(px² + py²)/(m1 + m2) = 44760/3500 = 12.79 m/s

Answer

v′ = 12.79 m/s
13.Rigid-body rotation

Answer: α = 27.59 rad/s²

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Block and pulley

block: m·g − T = m·a
pulley: T·R = I·α = ½·M·R²·(a/R) → T = ½·M·a

Acceleration

a = m·g/(m + M/2) = 9·9.81/(9 + 7) = 5.518 m/s²

Angular acceleration

α = a/R = 5.518/0.2 = 27.59 rad/s²

Answer

α = 27.59 rad/s²
14.Rigid-body rotation

Answer: a = 2.764 m/s²

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Equations of motion

m·g·sin θ − f = m·a
f·r = I·α = 0.5·m·r²·(a/r) → f = 0.5·m·a

Acceleration

a = g·sin θ/(1 + c) = 9.81·sin 25°/1.5 = 2.764 m/s²

Answer

a = 2.764 m/s²
15.Gears & gear trains

Answer: T2 = 80.67 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·1500/60 = 157.1 rad/s
T1 = P/ω₁ = 2200/157.1 = 14.01 N·m

Output torque

T2 = 14.01·72/12·0.96 = 80.67 N·m

Answer

T2 = 80.67 N·m
16.Gears & gear trains

Answer: ND = 72

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Intermediate shaft speed

nB = nC = 1440·40/60 = 960 rpm

Teeth on gear D

ND = C·nC/nout = 36·960/480 = 72

Answer

ND = 72
17.Springs & pendulums

Answer: v = 0.8441 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(370/1.2) = 17.56 rad/s
ω·t = 17.56·1.05 = 18.44 rad

Velocity

v = −A·ω·sin(ω·t) = −0.12·17.56·sin(18.44) = 0.8441 m/s

Answer

v = 0.8441 m/s
18.Springs & pendulums

Answer: vmax = 1.528 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(290/2.1) = 11.75 rad/s

Maximum speed

vmax = A·ω = 0.13·11.75 = 1.528 m/s

Answer

vmax = 1.528 m/s
19.Mechanical vibrations

Answer: fd = 2.978 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(5000/12) = 20.41 rad/s
fn = 20.41/(2π) = 3.249 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 3.249·√(1 − 0.4²) = 2.978 Hz

Answer

fd = 2.978 Hz
20.Mechanical vibrations

Answer: fn = 8.154 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 5 + 100 = 105 kN/m

Natural frequency

ωn = √(105000/40) = 51.23 rad/s
fn = 51.23/(2π) = 8.154 Hz

Answer

fn = 8.154 Hz

ExamProblems · examproblems.com/courses/dynamics