Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)t = ?20

A car driving at 72 km/h brakes with a constant deceleration of 6.5 m/s² until it stops. How long does braking take? Find t.

v₀ = 72 km/ha = −6.5 m/s²v = 0
t = s
2.KinematicsHard
v₀ = 14 m/s35 m

A ball is thrown straight up at 14 m/s from the edge of a roof 35 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 14 m/sh₀ = 35 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
θ = 35°a = ?m = 9 kg

A 9 kg block slides down a slope at 35° to the horizontal. The coefficient of kinetic friction is 0.3. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 9 kgθ = 35°μ = 0.3g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
θ = 15°blockv₀ = 12 m/s

A block is given a push so that it starts sliding up a ramp at 15° with a speed of 12 m/s. The coefficient of kinetic friction is 0.3. Use g = 9.81 m/s². How far d along the ramp does it slide before it stops?

v₀ = 12 m/sθ = 15°μ = 0.3g = 9.81 m/s²
d = m
5.Projectile motionMedium
v0​ = 28 m/s45°x = ?

A ball is launched at 45° above horizontal from level ground. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 28 m/sθ = 45°g = 9.81 m/s²
x = m
6.Projectile motionHard
28 mv0​ = 35 m/s55°x = ?

A ball is thrown from ground level at 35 m/s and 55° above the horizontal. It lands on the flat roof of a building 28 m high, on its way down. Ignore air resistance and use g = 9.81 m/s². Find the horizontal distance x from the launch point to where it lands.

v₀ = 35 m/sθ = 55°hroof = 28 mg = 9.81 m/s²
x = m
7.Circular motionMedium
r = 60 mvmax​ = ?

A car takes a flat curve of radius 60 m. The coefficient of static friction between tyres and road is 0.4. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 60 mμs = 0.4g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
r = 1.3 mv = 7 m/s

A 1.6 kg ball on a string 1.3 m long is swung in a vertical circle. At the lowest point it moves at 7 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.

m = 1.6 kgr = 1.3 mv = 7 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
90 km/h

A car travelling at 90 km/h on a level road brakes hard and skids to a stop with its wheels locked. The coefficient of kinetic friction between the tyres and the road is 0.6. Find the stopping distance d.

v = 90 km/hμ = 0.6g = 9.81 m/s²
d = m
10.Work & energyHard
h = 12 mR = 3 mN = ?

A 0.5 kg cart is released from rest at a height of 12 m on a smooth track that leads into a vertical circular loop of radius 3 m. Find the normal force N the track exerts on the cart at the top of the loop.

m = 0.5 kgh = 12 mR = 3 mg = 9.81 m/s²
N = N
11.Momentum & collisionsMedium
5 kg3 m/s1 kg

A 5 kg glider moving at 3 m/s makes a perfectly elastic head-on collision with a 1 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).

m1 = 5 kgm2 = 1 kgv1 = 3 m/sv2 = 0
v′1 = m/s
12.Momentum & collisionsHard
1100 kg15 m/s1300 kg15 m/sθ = ?

At a crossing a 1100 kg car travelling east at 15 m/s collides with a 1300 kg car travelling north at 15 m/s. The cars lock together. Find the direction θ of the wreck just after the collision, measured north of east.

m1 = 1100 kgv1 = 15 m/s (E)m2 = 1300 kgv2 = 15 m/s (N)
θ = °
13.Rigid-body rotationMedium
8 kgaαM = 4 kgR = 0.25 m

An 8 kg block hangs from a light cord wrapped around a pulley, a uniform solid disc of mass 4 kg and radius 0.25 m that turns on a frictionless horizontal axle. The block is released from rest. Use g = 9.81 m/s². Find the angular acceleration α of the pulley.

m = 8 kgM = 4 kgR = 0.25 mg = 9.81 m/s²
α = rad/s²
14.Rigid-body rotationHard
4.5 m/sω

A thin hoop of mass 1.5 kg rolls without slipping at 4.5 m/s. What percentage p of its total kinetic energy is rotational?

m = 1.5 kgv = 4.5 m/sI = m·r²
p = %
15.Gears & gear trainsMedium
N1​N2​ = ?

Two parallel shafts are 108 mm apart. They must be connected by a pair of spur gears with a module of 3 mm and a speed reduction of 3.5 : 1. How many teeth N2 must the gear have?

a = 108 mmm = 3 mmi = 3.5
N2 =
16.Gears & gear trainsHard
A = 16B = 30C = 15D = 45

In a compound gear train, gear A (16 teeth) on the input shaft turning at 960 rpm drives gear B (30 teeth). Gear C (15 teeth) is fixed to the same shaft as B and drives gear D (45 teeth) on the output shaft. Find the output speed nout.

nin = 960 rpmA = 16B = 30C = 15D = 45
nout = rpm
17.Springs & pendulumsMedium
L = 0.6 m

A simple pendulum has a length of 0.6 m. Use g = 9.81 m/s². Find its period T for small swings.

L = 0.6 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
2 kgk = 430 N/m

A 2 kg mass is attached to the lower end of an unstretched vertical spring with k = 430 N/m and released from rest. Use g = 9.81 m/s². Find the greatest speed vmax of the mass.

m = 2 kgk = 430 N/mg = 9.81 m/s²
vmax = m/s
19.Mechanical vibrationsMedium
k = 40 kN/mc = 600 N·s/mm = 100 kg

A 100 kg mass is supported by a spring with a stiffness of 40 kN/m and a viscous damper with a damping coefficient of 600 N·s/m. Find the damping ratio ζ.

m = 100 kgk = 40 kN/mc = 600 N·s/m
ζ =
20.Mechanical vibrationsHard
k1​ = 40k2​ = 15k3​ = 60m = 100 kg

A 100 kg mass hangs from spring k₃ = 60 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 40 kN/m and k₂ = 15 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 100 kgk1 = 40 kN/mk2 = 15 kN/mk3 = 60 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: t = 3.077 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 72/3.6 = 20 m/s

Braking time

0 = v₀ − a·t → t = v₀/a = 20/6.5 = 3.077 s

Answer

t = 3.077 s
2.Kinematics

Answer: t = 4.456 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−35 = 14·t − ½·9.81·t²
4.905·t² − 14·t − 35 = 0

Solve the quadratic

Only the positive root is physical.

t = (14 + √(14² + 2·9.81·35))/9.81 = 4.456 s

Answer

t = 4.456 s
3.Newton’s laws

Answer: a = 3.216 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 35° − 0.3·cos 35°) = 9.81·(0.5736 − 0.2457) = 3.216 m/s²

Answer

a = 3.216 m/s²
4.Newton’s laws

Answer: d = 13.38 m

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Deceleration

Both forces point down the slope; the mass cancels.

a = 9.81·(sin 15° + 0.3·cos 15°) = 5.382 m/s²

Distance

d = v₀²/(2a) = 12²/(2·5.382) = 13.38 m

Answer

d = 13.38 m
5.Projectile motion

Answer: x = 79.92 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 28·cos 45° = 19.8 m/s
vy = v0·sin θ = 28·sin 45° = 19.8 m/s

Time in the air

Starting and landing at the same height: t = 2vy/g.

t = 2·19.8/9.81 = 4.036 s

Horizontal distance

x = vx·t = 19.8·4.036 = 79.92 m

Answer

x = 79.92 m
6.Projectile motion

Answer: x = 92.46 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

vx = 20.08 m/s, vy = 28.67 m/s

Time to land on the roof

Larger root: the ball is descending.

28 = 28.67·t − 4.905·t²
t = (28.67 + √(28.67² − 2·9.81·28))/9.81 = 4.606 s

Horizontal distance

x = vx·t = 20.08·4.606 = 92.46 m

Answer

x = 92.46 m
7.Circular motion

Answer: vmax = 15.34 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.4·9.81·60) = 15.34 m/s

Answer

vmax = 15.34 m/s (55.24 km/h)
8.Circular motion

Answer: T = 76 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the lowest point

Towards the centre (up) is positive.

T − m·g = m·v²/r
T = 1.6·9.81 + 1.6·7²/1.3 = 15.7 + 60.31 = 76 N

Answer

T = 76 N
9.Work & energy

Answer: d = 53.09 m

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Speed in base units

v = 90/3.6 = 25 m/s

Energy balance

½mv² = μmg·d → d = v²/(2μg) = 25²/(2·0.6·9.81) = 53.09 m

Answer

d = 53.09 m

Doubling the speed makes the stopping distance four times longer.

10.Work & energy

Answer: N = 14.71 N

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.

Speed at the top

v² = 2g(h − 2R) = 2·9.81·(12 − 6) = 117.7 m²/s²

Forces at the top

m·g = 0.5·9.81 = 4.905 N
N = mv²/R − mg = 0.5·117.7/3 − 4.905 = 14.71 N

Answer

N = 14.71 N

The cart just makes it round when h = 2.5R; then N = 0 at the top.

11.Momentum & collisions

Answer: v′1 = 2 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (5 − 1)/(5 + 1)·3 = 2 m/s
v′2 = 2·5/(5 + 1)·3 = 5 m/s

Answer

v′1 = 2 m/s
12.Momentum & collisions

Answer: θ = 49.76 °

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum components

px = 1100·15 = 16500 kg·m/s
py = 1300·15 = 19500 kg·m/s

Direction

tan θ = py/px = 1.182 → θ = 49.76°

Answer

θ = 49.76°
13.Rigid-body rotation

Answer: α = 31.39 rad/s²

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Block and pulley

block: m·g − T = m·a
pulley: T·R = I·α = ½·M·R²·(a/R) → T = ½·M·a

Acceleration

a = m·g/(m + M/2) = 8·9.81/(8 + 2) = 7.848 m/s²

Angular acceleration

α = a/R = 7.848/0.25 = 31.39 rad/s²

Answer

α = 31.39 rad/s²
14.Rigid-body rotation

Answer: p = 50 %

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Translational and rotational parts

Etrans = ½·m·v² = ½·1.5·4.5² = 15.19 J
Erot = ½·I·ω² = ½·1·m·r²·(v/r)² = 1·15.19 = 15.19 J

Rotational share

p = 15.19/30.38·100% = c/(1 + c)·100% = 50%

Answer

p = 50 %

The share depends only on the shape, not on the mass or the speed.

15.Gears & gear trains

Answer: N2 = 56

Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.

Total number of teeth

N1 + N2 = 2a/m = 2·108/3 = 72

Split by the ratio

N1 = 72/(1 + 3.5) = 16
N2 = 3.5·16 = 56

Answer

N2 = 56
16.Gears & gear trains

Answer: nout = 170.7 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

First stage

nB = 960·16/30 = 512 rpm = nC

Second stage

nout = 512·15/45 = 170.7 rpm

Answer

nout = 170.7 rpm

total ratio = 5.625 : 1

17.Springs & pendulums

Answer: T = 1.554 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Pendulum period

T = 2π·√(0.6/9.81) = 1.554 s

Answer

T = 1.554 s
18.Springs & pendulums

Answer: vmax = 0.669 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Equilibrium and amplitude

x₀ = m·g/k = 2·9.81/430 = 0.04563 m = A

Greatest speed

The speed is largest at equilibrium.

ω = √(430/2) = 14.66 rad/s
vmax = A·ω = 0.04563·14.66 = 0.669 m/s

Answer

vmax = 0.669 m/s
19.Mechanical vibrations

Answer: ζ = 0.15

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(40000·100) = 4000 N·s/m

Damping ratio

ζ = c/cc = 600/4000 = 0.15

Answer

ζ = 0.15

ζ < 1, so the system is underdamped and oscillates as it decays.

20.Mechanical vibrations

Answer: fn = 2.696 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 40 + 15 = 55 kN/m
keq = 55·60/(55 + 60) = 28.7 kN/m

Natural frequency

ωn = √(28696/100) = 16.94 rad/s
fn = 16.94/(2π) = 2.696 Hz

Answer

fn = 2.696 Hz

ExamProblems · examproblems.com/courses/dynamics