Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
a = 3 m/s²s = 800 m

A plane starts from rest and accelerates uniformly at 3 m/s² along a runway. Find its speed v after 800 m.

v₀ = 0a = 3 m/s²s = 800 m
v = m/s
2.KinematicsHard
v₀ = 8 m/s40 m

A ball is thrown straight up at 8 m/s from the edge of a roof 40 m above the ground. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax above the ground.

v₀ = 8 m/sh₀ = 40 mg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
boxv₀ = 8 m/sμ = ?

A box slides across a level floor with an initial speed of 8 m/s and comes to rest after 11 m. Use g = 9.81 m/s². Find the coefficient of kinetic friction μ.

v₀ = 8 m/sd = 11 mg = 9.81 m/s²
μ =
4.Newton’s lawsHard
m1​ = 5.5 kg3 kgno friction

A 5.5 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 3 kg mass. The table is frictionless. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 5.5 kgm2 = 3 kgμ = 0g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = 32 m/s35°rangeH = ?

A ball is launched at 35° above horizontal from level ground. Ignore air resistance. Find the maximum height H the ball reaches.

v0 = 32 m/sθ = 35°g = 9.81 m/s²
H = m
6.Projectile motionHard
h = 40 mv0​ = 19 m/s65°H = ?

A ball is launched at 19 m/s and 65° above the horizontal from the top of a 40 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the greatest height H above the ground at the foot of the cliff.

v₀ = 19 m/sθ = 65°h = 40 mg = 9.81 m/s²
H = m
7.Circular motionMedium
r = 80 mvmax​ = ?

A car takes a flat curve of radius 80 m. The coefficient of static friction between tyres and road is 0.7. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 80 mμs = 0.7g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
R = 7 mh = 26.6 m

A 2.5 kg cart is released from rest at a height of 26.6 m on a frictionless track and runs through a vertical loop of radius 7 m. Use g = 9.81 m/s². Find the normal force Nbottom of the track on the cart at the bottom of the loop.

m = 2.5 kgh = 26.6 mR = 7 mg = 9.81 m/s²
Nbottom = N
9.Work & energyMedium
45°d = 4 mμ = 0.35

A block slides from rest down a slope at 45° to the horizontal. The coefficient of kinetic friction is 0.35. Find its speed v after it has slid 4 m along the slope.

θ = 45°μ = 0.35d = 4 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
h = 4 mL = 1.5 mμ = 0.3k = 1000 N/m

A 2.5 kg block is released from rest at height 4 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 1.5 m long (μ = 0.3) and then runs onto a spring (k = 1000 N/m) on a smooth surface. Find the maximum compression x of the spring.

m = 2.5 kgh = 4 mL = 1.5 mμ = 0.3k = 1000 N/mg = 9.81 m/s²
x = cm
11.Momentum & collisionsMedium
2 kg8 m/s2.5 kg

A 2 kg glider moving at 8 m/s makes a perfectly elastic head-on collision with a 2.5 kg glider at rest on a frictionless track. Find the velocity v′2 of the second glider after the collision.

m1 = 2 kgm2 = 2.5 kgv1 = 8 m/sv2 = 0
v′2 = m/s
12.Momentum & collisionsHard
4 kgv = ?5 g25°L = 0.8 m

A 5 g bullet is fired horizontally into a 4 kg block hanging from light strings 0.8 m long, and stays in it. The strings swing out to a largest angle of 25° from the vertical. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 5 gM = 4 kgL = 0.8 mθ = 25°g = 9.81 m/s²
v = m/s
13.Rigid-body rotationMedium
v = ?2 kgL = 2.1 mm = 6 kg

A uniform slender rod of mass 6 kg and length 2.1 m is pinned at one end and released from rest in a horizontal position. A small ball of mass 2 kg is fixed to its free end. Ignore friction and use g = 9.81 m/s². Find the speed v of the free end as the rod swings through the vertical position.

m = 6 kgL = 2.1 mmball = 2 kgg = 9.81 m/s²
v = m/s
14.Rigid-body rotationHard
θ = 40°vs = 10 m

A thin hoop starts from rest and rolls without slipping down a slope inclined at 40° to the horizontal. Use g = 9.81 m/s². Its radius is 0.25 m. Find its angular velocity ω after it has rolled 10 m along the slope.

θ = 40°s = 10 mI = m·r²g = 9.81 m/s²r = 0.25 m
ω = rad/s
15.Gears & gear trainsMedium
Nw​ = 45z = 3, 1440 rpm

A worm with 3 start(s) turns at 1440 rpm and drives a worm wheel with 45 teeth. Find the speed nw of the wheel.

z = 3Nw = 45n = 1440 rpm
nw = rpm
16.Gears & gear trainsHard
d1​ = 120 mmd2​ = 250 mm720 rpmC = 600 mmθ = ?

An open belt connects a 120 mm pulley and a 250 mm pulley whose centres are 600 mm apart. Find the angle of wrap θ on the smaller pulley, in degrees.

d1 = 120 mmd2 = 250 mmC = 600 mm
θ = °
17.Springs & pendulumsMedium
L = 1.7 mT = 2.75 s

An astronaut on another planet finds that a simple pendulum 1.7 m long has a period of 2.75 s for small swings. Find the gravitational acceleration g on that planet.

L = 1.7 mT = 2.75 s
g = m/s²
18.Springs & pendulumsHard
mk = 180 N/mA = 16 cmx = 3 cm

A mass on a spring with k = 180 N/m oscillates on a frictionless surface with an amplitude of 16 cm. Find its kinetic energy K when it is 3 cm from equilibrium.

k = 180 N/mA = 16 cmx = 3 cm
K = J
19.Mechanical vibrationsMedium
k = 8 kN/mζ = 0.4m = 50 kg

A 50 kg mass on a spring with a stiffness of 8 kN/m has a viscous damper giving a damping ratio of 0.4. Find the damped natural frequency fd of its free vibration in Hz.

m = 50 kgk = 8 kN/mζ = 0.4
fd = Hz
20.Mechanical vibrationsHard
k1​ = 20k2​ = 5k3​ = 10m = 50 kg

A 50 kg mass hangs from spring k₃ = 10 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 20 kN/m and k₂ = 5 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 50 kgk1 = 20 kN/mk2 = 5 kN/mk3 = 10 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: v = 69.28 m/s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Speed after the distance

v = √(2·a·s) = √(2·3·800) = 69.28 m/s

Answer

v = 69.28 m/s
(249.4 km/h)
2.Kinematics

Answer: hmax = 43.26 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Rise above the roof

0 = v₀² − 2·g·Δh → Δh = 8²/(2·9.81) = 3.262 m

Height above the ground

hmax = 40 + 3.262 = 43.26 m

Answer

hmax = 43.26 m
3.Newton’s laws

Answer: μ = 0.2965

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Deceleration

a = v₀²/(2d) = 8²/(2·11) = 2.909 m/s²

Friction coefficient

μ·m·g = m·a → μ = a/g = 2.909/9.81 = 0.2965

Answer

μ = 0.2965
4.Newton’s laws

Answer: T = 19.04 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (29.43 − 0)/8.5 = 3.462 m/s²

Tension from the block on the table

T − μ·m1·g = m1·a
T = 5.5·3.462 + 0 = 19.04 N

Answer

T = 19.04 N
5.Projectile motion

Answer: H = 17.17 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 32·cos 35° = 26.21 m/s
vy = v0·sin θ = 32·sin 35° = 18.35 m/s

Highest point

At the top the vertical velocity is zero: vy² = 2gH.

H = vy²/(2g) = 18.35²/(2·9.81) = 17.17 m

Answer

H = 17.17 m
6.Projectile motion

Answer: H = 55.11 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Vertical launch speed

vy = 19·sin 65° = 17.22 m/s

Rise above the cliff

Δh = vy²/(2g) = 17.22²/(2·9.81) = 15.11 m

Height above the ground

H = 40 + 15.11 = 55.11 m

Answer

H = 55.11 m
7.Circular motion

Answer: vmax = 23.44 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.7·9.81·80) = 23.44 m/s

Answer

vmax = 23.44 m/s (84.38 km/h)
8.Circular motion

Answer: Nbottom = 210.9 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Speed from energy conservation

v² = 2·9.81·26.6 = 521.9 m²/s²

Forces

Towards the centre is positive.

N = m·v²/R + m·g = 2.5·521.9/7 + 24.53 = 210.9 N

Answer

Nbottom = 210.9 N
9.Work & energy

Answer: v = 6.006 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy balance along the slope

The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.

½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·4·(0.7071 − 0.35·0.7071)) = 6.006 m/s

Answer

v = 6.006 m/s
10.Work & energy

Answer: x = 41.73 cm

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 24.53·(4 − 0.3·1.5) = 87.06 J

Maximum compression

½kx² = 87.06 → x = √(2·87.06/1000) = 0.4173 m = 41.73 cm

Answer

x = 41.73 cm
11.Momentum & collisions

Answer: v′2 = 7.111 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (2 − 2.5)/(2 + 2.5)·8 = −0.8889 m/s
v′2 = 2·2/(2 + 2.5)·8 = 7.111 m/s

Answer

v′2 = 7.111 m/s
12.Momentum & collisions

Answer: v = 971.4 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Rise of the block

h = L·(1 − cos θ) = 0.8·(1 − cos 25°) = 0.07495 m

Speed after impact

V = √(2·9.81·0.07495) = 1.213 m/s

Collision

v = (m + M)·V/m = 4.005·1.213/0.005 = 971.4 m/s

Answer

v = 971.4 m/s
13.Rigid-body rotation

Answer: v = 7.177 m/s

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Loss of potential energy

m·g·L/2 + mball·g·L = 6·9.81·1.05 + 2·9.81·2.1 = 103 J

Moment of inertia about the pin

IO = m·L²/3 + mball·L² = 8.82 + 8.82 = 17.64 kg·m²

Energy balance

½·IO·ω² = 103 → ω = √(2·103/17.64) = 3.417 rad/s
v = ω·L = 3.417·2.1 = 7.177 m/s

Answer

v = 7.177 m/s
14.Rigid-body rotation

Answer: ω = 31.76 rad/s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Height dropped

h = s·sin θ = 10·sin 40° = 6.428 m

Energy balance with rolling

Rolling without slipping: ω = v/r, and friction does no work at the contact point.

m·g·h = ½·m·v²·(1 + 1)
v = √(2·9.81·6.428/2) = 7.941 m/s
ω = v/r = 7.941/0.25 = 31.76 rad/s

Answer

ω = 31.76 rad/s
15.Gears & gear trains

Answer: nw = 96 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Wheel speed

nw = n·z/Nw = 1440·3/45 = 96 rpm

Answer

nw = 96 rpm
16.Gears & gear trains

Answer: θ = 167.6 °

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Belt angle

asin(0.1083) = 6.219°

Angle of wrap

θ = 180 − 2·6.219 = 167.6°

Answer

θ = 167.6°
17.Springs & pendulums

Answer: g = 8.874 m/s²

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Solve for g

g = 4π²·L/T² = 4π²·1.7/2.75² = 8.874 m/s²

Answer

g = 8.874 m/s²
18.Springs & pendulums

Answer: K = 2.223 J

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Total energy

E = ½·k·A² = ½·180·0.16² = 2.304 J

Spring energy at x

U = ½·k·x² = ½·180·0.03² = 0.081 J

Kinetic energy

K = 2.304 − 0.081 = 2.223 J

Answer

K = 2.223 J
19.Mechanical vibrations

Answer: fd = 1.845 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(8000/50) = 12.65 rad/s
fn = 12.65/(2π) = 2.013 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 2.013·√(1 − 0.4²) = 1.845 Hz

Answer

fd = 1.845 Hz
20.Mechanical vibrations

Answer: fn = 1.902 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 20 + 5 = 25 kN/m
keq = 25·10/(25 + 10) = 7.143 kN/m

Natural frequency

ωn = √(7143/50) = 11.95 rad/s
fn = 11.95/(2π) = 1.902 Hz

Answer

fn = 1.902 Hz

ExamProblems · examproblems.com/courses/dynamics