Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)2.5 s20

A car driving at 72 km/h brakes with a constant deceleration of 8 m/s² until it stops. Find the braking distance s.

v₀ = 72 km/ha = −8 m/s²v = 0
s = m
2.KinematicsHard
v₀ = 17 m/s25 m

A ball is thrown straight up at 17 m/s from the edge of a roof 25 m above the ground. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax above the ground.

v₀ = 17 m/sh₀ = 25 mg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
θ = 20°a = ?m = 15 kg

A 15 kg block slides down a slope at 20° to the horizontal. The coefficient of kinetic friction is 0.3. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 15 kgθ = 20°μ = 0.3g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 3 kg6 kgμ = 0.25

A 3 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 6 kg mass. The coefficient of kinetic friction between block and table is 0.25. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 3 kgm2 = 6 kgμ = 0.25g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = 18 m/s55°rangeH = ?

A ball is launched at 55° above horizontal from level ground. Ignore air resistance. Find the maximum height H the ball reaches.

v0 = 18 m/sθ = 55°g = 9.81 m/s²
H = m
6.Projectile motionHard
21 mv0​ = 35 m/s70°x = ?

A ball is thrown from ground level at 35 m/s and 70° above the horizontal. It lands on the flat roof of a building 21 m high, on its way down. Ignore air resistance and use g = 9.81 m/s². Find the horizontal distance x from the launch point to where it lands.

v₀ = 35 m/sθ = 70°hroof = 21 mg = 9.81 m/s²
x = m
7.Circular motionMedium
r = 70 mvmax​ = ?

A car takes a flat curve of radius 70 m. The coefficient of static friction between tyres and road is 0.5. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 70 mμs = 0.5g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
R = 1 mh = 4.9 m

A 0.5 kg cart is released from rest at a height of 4.9 m on a frictionless track and runs through a vertical loop of radius 1 m. Use g = 9.81 m/s². Find the normal force Nbottom of the track on the cart at the bottom of the loop.

m = 0.5 kgh = 4.9 mR = 1 mg = 9.81 m/s²
Nbottom = N
9.Work & energyMedium
45°d = 5 mμ = 0.4

A 2.5 kg block slides 5 m down a slope at 45° to the horizontal, with a coefficient of kinetic friction of 0.4. Find the work Wf done against friction.

m = 2.5 kgθ = 45°μ = 0.4d = 5 mg = 9.81 m/s²
Wf = J
10.Work & energyHard
h = 3.5 mR = 1 mN = ?

A 1 kg cart is released from rest at a height of 3.5 m on a smooth track that leads into a vertical circular loop of radius 1 m. Find the normal force N the track exerts on the cart at the top of the loop.

m = 1 kgh = 3.5 mR = 1 mg = 9.81 m/s²
N = N
11.Momentum & collisionsMedium
12 kg23 m/s1 kgv′2​ = ?

A 13 kg projectile moving horizontally at 9 m/s explodes into two fragments that move along the same line. The 12 kg fragment continues forwards at 23 m/s. Find the velocity v′2 of the 1 kg fragment (positive in the original direction).

M = 13 kgu = 9 m/sm1 = 12 kgv′1 = 23 m/sm2 = 1 kg
v′2 = m/s
12.Momentum & collisionsHard
800 kgv1​ = ?1500 kg

An 800 kg car runs into a parked 1500 kg car. The wrecks lock together and skid 15.5 m before stopping. The coefficient of kinetic friction between tyres and road is 0.7. Use g = 9.81 m/s². Find the speed v1 of the first car just before the collision.

m1 = 800 kgm2 = 1500 kgd = 15.5 mμ = 0.7g = 9.81 m/s²
v1 = m/s
13.Rigid-body rotationMedium
n = 2200 rpmTb​ = 185 N·mI = 0.5 kg·m²

A flywheel with a moment of inertia of 0.5 kg·m² spins at 2200 rpm. A brake applies a constant friction torque of 185 N·m. How long t does it take to stop?

I = 0.5 kg·m²n = 2200 rpmTb = 185 N·m
t = s
14.Rigid-body rotationHard
180 m/s30 g0.24 mL = 0.6 m6 kg

A uniform slender rod of mass 6 kg and length 0.6 m hangs at rest from a frictionless pivot at its top end. A 30 g bullet moving horizontally at 180 m/s hits the rod 0.24 m below the pivot and stays embedded. Find the angular velocity ω of the rod just after the impact.

M = 6 kgL = 0.6 mm = 30 gv = 180 m/sd = 0.24 m
ω = rad/s
15.Gears & gear trainsMedium
N1​ = 72N2​ = 80

An 11 kW motor running at 1500 rpm drives a pinion with 72 teeth, which meshes with a gear with 80 teeth. Ignore losses. Find the output torque T2 on the gear shaft.

P = 11 kWn1 = 1500 rpmN1 = 72N2 = 80η = 100%
T2 = N·m
16.Gears & gear trainsHard
A = 32B = 40C = 40D = ?

In a compound gear train, gear A (32 teeth) on the input shaft turns at 2880 rpm and drives gear B (40 teeth). Gear C (40 teeth) is fixed to the same shaft as B and drives gear D on the output shaft. The output must turn at 1843 rpm. How many teeth ND must gear D have?

nin = 2880 rpmA = 32B = 40C = 40nout = 1843 rpm
ND =
17.Springs & pendulumsMedium
0.9 kgk = 410 N/mA = 15 cmx = 12 cm

A 0.9 kg mass on a spring with k = 410 N/m oscillates on a frictionless surface with an amplitude of 15 cm. Find its speed v when it is 12 cm from equilibrium.

m = 0.9 kgk = 410 N/mA = 15 cmx = 12 cm
v = m/s
18.Springs & pendulumsHard
2.5 kgk = 450 N/m

A 2.5 kg mass is attached to the lower end of an unstretched vertical spring with k = 450 N/m and released from rest. Use g = 9.81 m/s². Find the greatest speed vmax of the mass.

m = 2.5 kgk = 450 N/mg = 9.81 m/s²
vmax = m/s
19.Mechanical vibrationsMedium
k = 100 kN/mc = 550 N·s/mm = 12 kg

A 12 kg mass is supported by a spring with a stiffness of 100 kN/m and a viscous damper with a damping coefficient of 550 N·s/m. Find the damping ratio ζ.

m = 12 kgk = 100 kN/mc = 550 N·s/m
ζ =
20.Mechanical vibrationsHard
k1​ = 30k2​ = 10m = 25 kg

A 25 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 30 kN/m and k₂ = 10 kN/m. The mass stays level. Find the equivalent stiffness keq of the spring system in kN/m.

m = 25 kgk1 = 30 kN/mk2 = 10 kN/m
keq = kN/m

3Solutions

1.Kinematics

Answer: s = 25 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 72/3.6 = 20 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 20²/(2·8) = 25 m

Answer

s = 25 m
2.Kinematics

Answer: hmax = 39.73 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Rise above the roof

0 = v₀² − 2·g·Δh → Δh = 17²/(2·9.81) = 14.73 m

Height above the ground

hmax = 25 + 14.73 = 39.73 m

Answer

hmax = 39.73 m
3.Newton’s laws

Answer: a = 0.5897 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 20° − 0.3·cos 20°) = 9.81·(0.342 − 0.2819) = 0.5897 m/s²

Answer

a = 0.5897 m/s²
4.Newton’s laws

Answer: T = 24.52 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (58.86 − 7.357)/9 = 5.723 m/s²

Tension from the block on the table

T − μ·m1·g = m1·a
T = 3·5.723 + 7.357 = 24.52 N

Answer

T = 24.52 N
5.Projectile motion

Answer: H = 11.08 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 18·cos 55° = 10.32 m/s
vy = v0·sin θ = 18·sin 55° = 14.74 m/s

Highest point

At the top the vertical velocity is zero: vy² = 2gH.

H = vy²/(2g) = 14.74²/(2·9.81) = 11.08 m

Answer

H = 11.08 m
6.Projectile motion

Answer: x = 71.71 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

vx = 11.97 m/s, vy = 32.89 m/s

Time to land on the roof

Larger root: the ball is descending.

21 = 32.89·t − 4.905·t²
t = (32.89 + √(32.89² − 2·9.81·21))/9.81 = 5.991 s

Horizontal distance

x = vx·t = 11.97·5.991 = 71.71 m

Answer

x = 71.71 m
7.Circular motion

Answer: vmax = 18.53 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.5·9.81·70) = 18.53 m/s

Answer

vmax = 18.53 m/s (66.71 km/h)
8.Circular motion

Answer: Nbottom = 52.97 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Speed from energy conservation

v² = 2·9.81·4.9 = 96.14 m²/s²

Forces

Towards the centre is positive.

N = m·v²/R + m·g = 0.5·96.14/1 + 4.905 = 52.97 N

Answer

Nbottom = 52.97 N
9.Work & energy

Answer: Wf = 34.68 J

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Friction force

N = mg·cos θ = 24.53·0.7071 = 17.34 N
F = μN = 0.4·17.34 = 6.937 N

Work against friction

Wf = F·d = 6.937·5 = 34.68 J

Answer

Wf = 34.68 J
10.Work & energy

Answer: N = 19.62 N

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.

Speed at the top

v² = 2g(h − 2R) = 2·9.81·(3.5 − 2) = 29.43 m²/s²

Forces at the top

m·g = 1·9.81 = 9.81 N
N = mv²/R − mg = 1·29.43/1 − 9.81 = 19.62 N

Answer

N = 19.62 N

The cart just makes it round when h = 2.5R; then N = 0 at the top.

11.Momentum & collisions

Answer: v′2 = −159 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum before

p = M·u = 13·9 = 117 kg·m/s

Momentum after

117 = 12·23 + 1·v′2
v′2 = (117 − 276)/1 = −159 m/s

Answer

v′2 = −159 m/s

The minus sign means the second fragment flies backwards.

12.Momentum & collisions

Answer: v1 = 41.95 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Speed after the collision

V = √(2·μ·g·d) = √(2·0.7·9.81·15.5) = 14.59 m/s

Momentum in the collision

m1·v1 = (m1 + m2)·V → v1 = 2300·14.59/800 = 41.95 m/s

Answer

v1 = 41.95 m/s
(151 km/h)
13.Rigid-body rotation

Answer: t = 0.6227 s

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·2200/60 = 230.4 rad/s

Deceleration and time

α = Tb/I = 185/0.5 = 370 rad/s²
t = ω/α = 230.4/370 = 0.6227 s

Answer

t = 0.6227 s
14.Rigid-body rotation

Answer: ω = 1.796 rad/s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Moment of inertia after the impact

I = M·L²/3 + m·d² = 6·0.6²/3 + 0.03·0.24² = 0.7217 kg·m²

Angular momentum about the pivot

The pivot force passes through the pivot, so it has no moment there during the impact.

m·v·d = I·ω → ω = 0.03·180·0.24/0.7217 = 1.796 rad/s

Answer

ω = 1.796 rad/s
15.Gears & gear trains

Answer: T2 = 77.81 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·1500/60 = 157.1 rad/s
T1 = P/ω₁ = 11000/157.1 = 70.03 N·m

Output torque

T2 = 70.03·80/72·1 = 77.81 N·m

Answer

T2 = 77.81 N·m
16.Gears & gear trains

Answer: ND = 50

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Intermediate shaft speed

nB = nC = 2880·32/40 = 2304 rpm

Teeth on gear D

ND = C·nC/nout = 40·2304/1843 = 50

Answer

ND = 50
17.Springs & pendulums

Answer: v = 1.921 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(410/0.9) = 21.34 rad/s

Speed at x

v = ω·√(A² − x²) = 21.34·√(0.15² − 0.12²) = 1.921 m/s

Answer

v = 1.921 m/s
18.Springs & pendulums

Answer: vmax = 0.7312 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Equilibrium and amplitude

x₀ = m·g/k = 2.5·9.81/450 = 0.0545 m = A

Greatest speed

The speed is largest at equilibrium.

ω = √(450/2.5) = 13.42 rad/s
vmax = A·ω = 0.0545·13.42 = 0.7312 m/s

Answer

vmax = 0.7312 m/s
19.Mechanical vibrations

Answer: ζ = 0.251

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(100000·12) = 2191 N·s/m

Damping ratio

ζ = c/cc = 550/2191 = 0.251

Answer

ζ = 0.251

ζ < 1, so the system is underdamped and oscillates as it decays.

20.Mechanical vibrations

Answer: keq = 40 kN/m

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 30 + 10 = 40 kN/m

Answer

keq = 40 kN/m

ExamProblems · examproblems.com/courses/dynamics