In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Kinematics
Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h
Method
List what you know: v₀, v, a, t and s, with units.
Pick the equation that contains your three knowns and the unknown.
Choose one positive direction and give opposing quantities a minus sign.
Solve and check that the answer is physically sensible.
Newton’s laws
Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ
Method
Draw a free-body diagram with every force on the body.
Choose a positive direction along the motion.
Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
Apply ΣF = m·a along the motion; friction is μ·N against the motion.
Projectile motion
Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g
Method
Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
The horizontal motion has constant speed; the vertical motion has acceleration −g.
Find the time of flight from the vertical motion.
Use that time in the horizontal motion to find the range.
Circular motion
Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)
Work & energy
Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t
Momentum & collisions
Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv
Method
Choose a positive direction and give each velocity its sign.
Write the total momentum before: Σm·v.
For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
Set momentum before equal to momentum after and solve.
Rigid-body rotation
Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω
Method
Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.
Gears & gear trains
Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios
Springs & pendulums
Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²
Mechanical vibrations
Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2
2Practice problems
1.KinematicsMedium
A car speeding at a constant 32 m/s passes a police car standing still. At that moment the police car starts and accelerates uniformly at 4.5 m/s². How long does it take the police car to catch up? Find t.
vcar = 32 m/sapolice = 4.5 m/s²v0,police = 0
t = s
2.KinematicsHard
Ball A is dropped from rest from a height of 10 m. At the same instant ball B is thrown straight up from the ground directly below at 14 m/s. Ignore air resistance and use g = 9.81 m/s². When do the balls meet? Find t.
H = 10 mv0B = 14 m/sg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
A 40 kg box is pushed up a ramp at 20° to the horizontal at constant speed, by a force parallel to the ramp. The coefficient of kinetic friction is 0.1. Use g = 9.81 m/s². Find the pushing force F.
m = 40 kgθ = 20°μ = 0.1g = 9.81 m/s²
F = N
4.Newton’s lawsHard
A block is given a push so that it starts sliding up a ramp at 30° with a speed of 6.5 m/s. The coefficient of kinetic friction is 0.15. Use g = 9.81 m/s². How far d along the ramp does it slide before it stops?
v₀ = 6.5 m/sθ = 30°μ = 0.15g = 9.81 m/s²
d = m
5.Projectile motionMedium
A ball is launched at 20° above horizontal from level ground. Ignore air resistance. Find the time of flight t until the ball hits the ground.
v0 = 10 m/sθ = 20°g = 9.81 m/s²
t = s
6.Projectile motionHard
A ball is launched at 50° above horizontal from the top of a 20 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.
v0 = 15 m/sθ = 50°h = 20 mg = 9.81 m/s²
t = s
7.Circular motionMedium
A curve of radius 200 m is banked at 15°. At what speed v can a car take it with no friction needed at all? Use g = 9.81 m/s².
r = 200 mθ = 15°g = 9.81 m/s²
v = m/s
8.Circular motionHard
A 1.5 kg ball on a string 1.3 m long is swung in a vertical circle. At the lowest point it moves at 3 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.
m = 1.5 kgr = 1.3 mv = 3 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
A 10 kg ball hangs on a light string of length 2 m. It is pulled aside until the string makes 50° with the vertical and released from rest. Find the tension T in the string when the ball passes the lowest point.
m = 10 kgL = 2 mθ = 50°g = 9.81 m/s²
T = N
10.Work & energyHard
A 1 kg block is released from rest at height 2 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 2.5 m long (μ = 0.15) and then runs onto a spring (k = 2000 N/m) on a smooth surface. Find the maximum compression x of the spring.
m = 1 kgh = 2 mL = 2.5 mμ = 0.15k = 2000 N/mg = 9.81 m/s²
x = cm
11.Momentum & collisionsMedium
A 900 kg car moving at 9 m/s runs into a stationary 1500 kg car and the two lock together. How much kinetic energy ΔK is lost in the collision?
m1 = 900 kgv1 = 9 m/sm2 = 1500 kgv2 = 0
ΔK = J
12.Momentum & collisionsHard
A 1700 kg car runs into a parked 1400 kg car. The wrecks lock together and skid 21 m before stopping. The coefficient of kinetic friction between tyres and road is 0.75. Use g = 9.81 m/s². Find the speed v1 of the first car just before the collision.
A uniform slender rod of mass 3.5 kg and length 1.8 m is pinned at one end and held horizontal. It is released from rest. Use g = 9.81 m/s². Find its angular acceleration α just after release.
m = 3.5 kgL = 1.8 mg = 9.81 m/s²
α = rad/s²
14.Rigid-body rotationHard
A person stands on a frictionless turntable and holds a 4 kg dumbbell in each hand, 0.7 m from the axis. The person and turntable alone have a moment of inertia of 3 kg·m² about the axis. They turn at 35 rpm, then pull the dumbbells in to 0.2 m from the axis. Treat the dumbbells as point masses. Find the new speed n2 in rpm.
A belt runs on a 120 mm driving pulley at 960 rpm. The tension is 1200 N on the tight side and 300 N on the slack side. Find the power P transmitted, in kW.
d1 = 120 mmn1 = 960 rpmT1 = 1200 NT2 = 300 N
P = kW
16.Gears & gear trainsHard
In a compound gear train, gear A (16 teeth) on the input shaft turns at 3000 rpm and drives gear B (24 teeth). Gear C (24 teeth) is fixed to the same shaft as B and drives gear D on the output shaft. The output must turn at 1920 rpm. How many teeth ND must gear D have?
nin = 3000 rpmA = 16B = 24C = 24nout = 1920 rpm
ND =
17.Springs & pendulumsMedium
How long must a simple pendulum be to have a period of 1 s? Use g = 9.81 m/s². Find L.
T = 1 sg = 9.81 m/s²
L = m
18.Springs & pendulumsHard
An 8 g bullet moving at 150 m/s hits and stays in a 2.5 kg block resting on a frictionless surface. The block is attached to a horizontal spring with k = 1700 N/m. Find the amplitude A of the resulting oscillation in cm.
m = 8 gv = 150 m/sM = 2.5 kgk = 1700 N/m
A = cm
19.Mechanical vibrationsMedium
A 5 kg mass on a spring with a stiffness of 12 kN/m has a viscous damper giving a damping ratio of 0.35. Find the damped natural frequency fd of its free vibration in Hz.
m = 5 kgk = 12 kN/mζ = 0.35
fd = Hz
20.Mechanical vibrationsHard
A 20 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 10 kN/m and k₂ = 40 kN/m. The mass stays level. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.
m = 20 kgk1 = 10 kN/mk2 = 40 kN/m
fn = Hz
3Solutions
1.Kinematics
Answer: t = 14.22 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equal distances
v·t = ½·a·t² → t = 2v/a = 2·32/4.5 = 14.22 s
Answer
t = 14.22 s
At that moment the police car moves at 2v = 64 m/s.
2.Kinematics
Answer: t = 0.7143 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Meeting time
Up is positive, the ground is y = 0.
10 − ½g·t² = 14·t − ½g·t² → t = 10/14 = 0.7143 s
Answer
t = 0.7143 s
3.Newton’s laws
Answer: F = 171.1 N
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Forces along the slope
Constant speed: the forces balance.
F = m·g·sin θ + μ·m·g·cos θ
Pushing force
F = 134.2 + 36.87 = 171.1 N
Answer
F = 171.1 N
4.Newton’s laws
Answer: d = 3.419 m
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Deceleration
Both forces point down the slope; the mass cancels.
a = 9.81·(sin 30° + 0.15·cos 30°) = 6.179 m/s²
Distance
d = v₀²/(2a) = 6.5²/(2·6.179) = 3.419 m
Answer
d = 3.419 m
5.Projectile motion
Answer: t = 0.6973 s
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 10·cos 20° = 9.397 m/s
vy = v0·sin θ = 10·sin 20° = 3.42 m/s
Time in the air
Starting and landing at the same height: t = 2vy/g.
t = 2·3.42/9.81 = 0.6973 s
Answer
t = 0.6973 s
6.Projectile motion
Answer: t = 3.506 s
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 15·cos 50° = 9.642 m/s
vy = v0·sin θ = 15·sin 50° = 11.49 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 20 + 11.49·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (11.49 + √(132 + 392.4))/9.81 = 3.506 s
Answer
t = 3.506 s
7.Circular motion
Answer: v = 22.93 m/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
v = √(r·g·tan θ) = √(200·9.81·tan 15°) = 22.93 m/s
Answer
v = 22.93 m/s
(82.54 km/h)
8.Circular motion
Answer: T = 25.1 N
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Forces at the lowest point
Towards the centre (up) is positive.
T − m·g = m·v²/r
T = 1.5·9.81 + 1.5·3²/1.3 = 14.71 + 10.38 = 25.1 N
Answer
T = 25.1 N
9.Work & energy
Answer: T = 168.2 N
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.
Speed at the bottom
v² = 2gL(1 − cos θ) = 2·9.81·2·(1 − cos 50°) = 14.02 m²/s²
Forces at the bottom
m·g = 10·9.81 = 98.1 N
T = mg + mv²/L = 98.1 + 10·14.02/2 = 168.2 N
Answer
T = 168.2 N
Check: T = mg(3 − 2cos θ) = 168.2 N.
10.Work & energy
Answer: x = 12.63 cm
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy left after the rough strip
The ramp is smooth, so only the strip removes energy.
mgh − μmgL = 9.81·(2 − 0.15·2.5) = 15.94 J
Maximum compression
½kx² = 15.94 → x = √(2·15.94/2000) = 0.1263 m = 12.63 cm
Answer
x = 12.63 cm
11.Momentum & collisions
Answer: ΔK = 22781 J
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Common velocity
v′ = m1·v1/(m1 + m2) = 900·9/2400 = 3.375 m/s
Kinetic energy before and after
Kbefore = ½·900·9² = 36450 J
Kafter = ½·2400·3.375² = 13669 J
Energy lost
ΔK = 36450 − 13669 = 22781 J
Answer
ΔK = 22781 J
The lost energy goes into deformation, heat and sound.
12.Momentum & collisions
Answer: v1 = 32.06 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.
Moments about the pin
At the moment of release ω = 0, so there is no centripetal acceleration and the centre accelerates straight down.
Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.
Moments of inertia
I1 = 3 + 2·4·0.7² = 6.92 kg·m²
I2 = 3 + 2·4·0.2² = 3.32 kg·m²
Conservation of angular momentum
n2 = n1·I1/I2 = 35·6.92/3.32 = 72.95 rpm
Answer
n2 = 72.95 rpm
The kinetic energy increases: the extra energy comes from the work the person does pulling the dumbbells in.
15.Gears & gear trains
Answer: P = 5.429 kW
Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.
Belt speed
v = 6.032 m/s
Power
P = (1200 − 300)·6.032 = 5429 W = 5.429 kW
Answer
P = 5.429 kW
16.Gears & gear trains
Answer: ND = 25
Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.
Intermediate shaft speed
nB = nC = 3000·16/24 = 2000 rpm
Teeth on gear D
ND = C·nC/nout = 24·2000/1920 = 25
Answer
ND = 25
17.Springs & pendulums
Answer: L = 0.2485 m
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Solve for the length
L = g·(T/2π)² = 9.81·(1/2π)² = 0.2485 m
Answer
L = 0.2485 m
18.Springs & pendulums
Answer: A = 1.838 cm
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Speed after impact
V = m·v/(m + M) = 0.008·150/2.508 = 0.4785 m/s
Angular frequency
ω = √(k/(m + M)) = √(1700/2.508) = 26.04 rad/s
Amplitude
A = V/ω = 0.4785/26.04 = 0.01838 m = 1.838 cm
Answer
A = 1.838 cm
19.Mechanical vibrations
Answer: fd = 7.304 Hz
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Undamped natural frequency
ωn = √(12000/5) = 48.99 rad/s
fn = 48.99/(2π) = 7.797 Hz
Damped natural frequency
fd = fn·√(1 − ζ²) = 7.797·√(1 − 0.35²) = 7.304 Hz
Answer
fd = 7.304 Hz
20.Mechanical vibrations
Answer: fn = 7.958 Hz
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Equivalent stiffness
Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.