In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Kinematics
Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h
Method
List what you know: v₀, v, a, t and s, with units.
Pick the equation that contains your three knowns and the unknown.
Choose one positive direction and give opposing quantities a minus sign.
Solve and check that the answer is physically sensible.
Newton’s laws
Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ
Method
Draw a free-body diagram with every force on the body.
Choose a positive direction along the motion.
Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
Apply ΣF = m·a along the motion; friction is μ·N against the motion.
Projectile motion
Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g
Method
Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
The horizontal motion has constant speed; the vertical motion has acceleration −g.
Find the time of flight from the vertical motion.
Use that time in the horizontal motion to find the range.
Circular motion
Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)
Work & energy
Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t
Momentum & collisions
Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv
Method
Choose a positive direction and give each velocity its sign.
Write the total momentum before: Σm·v.
For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
Set momentum before equal to momentum after and solve.
Rigid-body rotation
Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω
Method
Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.
Gears & gear trains
Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios
Springs & pendulums
Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²
Mechanical vibrations
Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2
2Practice problems
1.KinematicsMedium
A car driving at 72 km/h brakes with a constant deceleration of 3.5 m/s² until it stops. How long does braking take? Find t.
v₀ = 72 km/ha = −3.5 m/s²v = 0
t = s
2.KinematicsHard
A ball is thrown straight up at 18 m/s from the edge of a roof 35 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.
v₀ = 18 m/sh₀ = 35 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
A 30 kg box is pushed up a ramp at 20° to the horizontal at constant speed, by a force parallel to the ramp. The coefficient of kinetic friction is 0.4. Use g = 9.81 m/s². Find the pushing force F.
m = 30 kgθ = 20°μ = 0.4g = 9.81 m/s²
F = N
4.Newton’s lawsHard
A 4 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 6 kg mass. The table is frictionless. Use g = 9.81 m/s². Find the acceleration a of the system.
m1 = 4 kgm2 = 6 kgμ = 0g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
A ball is kicked from level ground at 22 m/s and 35° above the horizontal towards a wall 37 m away. Ignore air resistance and use g = 9.81 m/s². At what height y does the ball pass the wall?
v₀ = 22 m/sθ = 35°x = 37 mg = 9.81 m/s²
y = m
6.Projectile motionHard
A ball is thrown from ground level at 34 m/s and 45° above the horizontal. It lands on the flat roof of a building 2 m high, on its way down. Ignore air resistance and use g = 9.81 m/s². Find the horizontal distance x from the launch point to where it lands.
v₀ = 34 m/sθ = 45°hroof = 2 mg = 9.81 m/s²
x = m
7.Circular motionMedium
A car takes a flat curve of radius 80 m. The coefficient of static friction between tyres and road is 0.7. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.
r = 80 mμs = 0.7g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
A small cart is released from rest on a frictionless track and runs into a vertical loop of radius 9.5 m. From what minimum height hmin above the bottom of the loop must it start to stay on the track at the top of the loop?
R = 9.5 mv₀ = 0
hmin = m
9.Work & energyMedium
A block slides from rest down a slope at 30° to the horizontal. The coefficient of kinetic friction is 0.25. Find its speed v after it has slid 4 m along the slope.
θ = 30°μ = 0.25d = 4 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
A spring of stiffness 5000 N/m at the bottom of a 30° slope is compressed by 10 cm against a 0.5 kg block and released. The coefficient of kinetic friction between block and slope is 0.25. How far d up the slope does the block travel from the release point before it stops? (Ignore the short distance over which the spring pushes, i.e. take friction and gravity over the whole distance d.)
A 0.5 kg glider moving at 8 m/s makes a perfectly elastic head-on collision with a 2.5 kg glider at rest on a frictionless track. Find the velocity v′2 of the second glider after the collision.
m1 = 0.5 kgm2 = 2.5 kgv1 = 8 m/sv2 = 0
v′2 = m/s
12.Momentum & collisionsHard
A 0.15 kg ball hits a wall at 16 m/s and bounces straight back at 17 m/s. The contact lasts 5 ms. Find the average force Favg of the wall on the ball.
m = 0.15 kgvin = 16 m/svout = 17 m/sΔt = 5 ms
Favg = N
13.Rigid-body rotationMedium
A motor brings a flywheel with a moment of inertia of 15.5 kg·m² from rest up to 2700 rpm in 4 s. Ignoring losses, find the average power Pavg it delivers, in kW.
I = 15.5 kg·m²n = 2700 rpmt = 4 s
Pavg = kW
14.Rigid-body rotationHard
A hollow sphere starts from rest and rolls without slipping down a slope inclined at 15° to the horizontal. Use g = 9.81 m/s². Find its speed v after it has rolled 2 m along the slope.
θ = 15°s = 2 mI = (2/3)·m·r²g = 9.81 m/s²
v = m/s
15.Gears & gear trainsMedium
A belt runs on a 120 mm driving pulley at 1440 rpm. The tension is 500 N on the tight side and 250 N on the slack side. Find the power P transmitted, in kW.
d1 = 120 mmn1 = 1440 rpmT1 = 500 NT2 = 250 N
P = kW
16.Gears & gear trainsHard
An open belt connects a 160 mm driving pulley at 2880 rpm to a 250 mm pulley; the centres are 500 mm apart. The coefficient of friction is 0.35 and the tight-side tension may not exceed 2000 N. Find the largest power P the belt can transmit without slipping, in kW (ignore centrifugal effects).
How long must a simple pendulum be to have a period of 1.7 s? Use g = 9.81 m/s². Find L.
T = 1.7 sg = 9.81 m/s²
L = m
18.Springs & pendulumsHard
A 1.6 kg mass on a spring with k = 420 N/m is pulled 7 cm from equilibrium and released. Find its maximum acceleration amax.
m = 1.6 kgk = 420 N/mA = 7 cm
amax = m/s²
19.Mechanical vibrationsMedium
A 10 kg mass is supported by a spring with a stiffness of 15 kN/m and a viscous damper with a damping coefficient of 40 N·s/m. Find the damping ratio ζ.
m = 10 kgk = 15 kN/mc = 40 N·s/m
ζ =
20.Mechanical vibrationsHard
A 5 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 25 kN/m and k₂ = 100 kN/m. The mass stays level. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.
m = 5 kgk1 = 25 kN/mk2 = 100 kN/m
fn = Hz
3Solutions
1.Kinematics
Answer: t = 5.714 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v₀ = 72/3.6 = 20 m/s
Braking time
0 = v₀ − a·t → t = v₀/a = 20/3.5 = 5.714 s
Answer
t = 5.714 s
2.Kinematics
Answer: t = 5.076 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equation of motion
Up is positive and the ground is h₀ below the starting point.
−35 = 18·t − ½·9.81·t²
4.905·t² − 18·t − 35 = 0
Solve the quadratic
Only the positive root is physical.
t = (18 + √(18² + 2·9.81·35))/9.81 = 5.076 s
Answer
t = 5.076 s
3.Newton’s laws
Answer: F = 211.3 N
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Forces along the slope
Constant speed: the forces balance.
F = m·g·sin θ + μ·m·g·cos θ
Pushing force
F = 100.7 + 110.6 = 211.3 N
Answer
F = 211.3 N
4.Newton’s laws
Answer: a = 5.886 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Time to the wall
vx = 22·cos 35° = 18.02 m/s
t = x/vx = 37/18.02 = 2.053 s
Height at that time
y = 12.62·2.053 − ½·9.81·2.053² = 5.232 m
Answer
y = 5.232 m
The ball is already on its way down at the wall.
6.Projectile motion
Answer: x = 115.8 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
vx = 24.04 m/s, vy = 24.04 m/s
Time to land on the roof
Larger root: the ball is descending.
2 = 24.04·t − 4.905·t²
t = (24.04 + √(24.04² − 2·9.81·2))/9.81 = 4.817 s
Horizontal distance
x = vx·t = 24.04·4.817 = 115.8 m
Answer
x = 115.8 m
7.Circular motion
Answer: vmax = 23.44 m/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Friction provides the centripetal force
m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.7·9.81·80) = 23.44 m/s
Answer
vmax = 23.44 m/s (84.38 km/h)
8.Circular motion
Answer: hmin = 23.75 m
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Condition at the top
m·g = m·v²/R → v² = g·R
Energy conservation
g·h = g·2R + ½·g·R → h = 2.5·R = 2.5·9.5 = 23.75 m
Answer
hmin = 23.75 m
9.Work & energy
Answer: v = 4.717 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy balance along the slope
The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.
½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·4·(0.5 − 0.25·0.866)) = 4.717 m/s
Answer
v = 4.717 m/s
10.Work & energy
Answer: d = 7.113 m
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Spring energy
x = 10 cm = 0.1 m
½kx² = ½·5000·0.1² = 25 J
Energy balance along the slope
m·g = 0.5·9.81 = 4.905 N
½kx² = mg·d·(sin θ + μ·cos θ)
d = 25/(4.905·(0.5 + 0.25·0.866)) = 7.113 m
Answer
d = 7.113 m
11.Momentum & collisions
Answer: v′2 = 2.667 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Elastic collision with a target at rest
Solving momentum and energy conservation together gives these two results.
v′1 = (0.5 − 2.5)/(0.5 + 2.5)·8 = −5.333 m/s
v′2 = 2·0.5/(0.5 + 2.5)·8 = 2.667 m/s
Answer
v′2 = 2.667 m/s
12.Momentum & collisions
Answer: Favg = 990 N
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Change in momentum
J = m·Δv = 0.15·(17 + 16) = 4.95 N·s
Average force
Favg = J/Δt = 4.95/0.005 = 990 N
Answer
Favg = 990 N
13.Rigid-body rotation
Answer: Pavg = 154.9 kW
Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.
Angular velocity
ω = 2π·2700/60 = 282.7 rad/s
Energy
E = ½·I·ω² = ½·15.5·282.7² = 619564 J
Average power
Pavg = E/t = 619564/4 = 154891 W = 154.9 kW
Answer
Pavg = 154.9 kW
14.Rigid-body rotation
Answer: v = 2.469 m/s
Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.
Height dropped
h = s·sin θ = 2·sin 15° = 0.5176 m
Energy balance with rolling
Rolling without slipping: ω = v/r, and friction does no work at the contact point.
m·g·h = ½·m·v²·(1 + 0.6667)
v = √(2·9.81·0.5176/1.667) = 2.469 m/s
Answer
v = 2.469 m/s
15.Gears & gear trains
Answer: P = 2.262 kW
Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.
Belt speed
v = 9.048 m/s
Power
P = (500 − 250)·9.048 = 2262 W = 2.262 kW
Answer
P = 2.262 kW
16.Gears & gear trains
Answer: P = 31.14 kW
Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.
Angle of wrap
θ = 2.961 rad
Slack-side tension
eμθ = e1.036 = 2.819, T₂ = 2000/2.819 = 709.4 N
Power
P = (2000 − 709.4)·24.13 = 31.14 kW
Answer
P = 31.14 kW
17.Springs & pendulums
Answer: L = 0.7181 m
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Solve for the length
L = g·(T/2π)² = 9.81·(1.7/2π)² = 0.7181 m
Answer
L = 0.7181 m
18.Springs & pendulums
Answer: amax = 18.37 m/s²
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Angular frequency
ω = √(420/1.6) = 16.2 rad/s
Maximum acceleration
amax = A·ω² = 0.07·16.2² = 18.37 m/s²
Answer
amax = 18.37 m/s²
19.Mechanical vibrations
Answer: ζ = 0.05164
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Critical damping
cc = 2·√(k·m) = 2·√(15000·10) = 774.6 N·s/m
Damping ratio
ζ = c/cc = 40/774.6 = 0.05164
Answer
ζ = 0.05164
ζ < 1, so the system is underdamped and oscillates as it decays.
20.Mechanical vibrations
Answer: fn = 25.16 Hz
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Equivalent stiffness
Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.