Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)2.5 s12.5

A car driving at 45 km/h brakes with a constant deceleration of 5 m/s² until it stops. Find the braking distance s.

v₀ = 45 km/ha = −5 m/s²v = 0
s = m
2.KinematicsHard
v₀ = 7 m/s20 m

A ball is thrown straight up at 7 m/s from the edge of a roof 20 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 7 m/sh₀ = 20 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
boxv₀ = 7 m/sμ = ?

A box slides across a level floor with an initial speed of 7 m/s and comes to rest after 50 m. Use g = 9.81 m/s². Find the coefficient of kinetic friction μ.

v₀ = 7 m/sd = 50 mg = 9.81 m/s²
μ =
4.Newton’s lawsHard
θ = 20°blockv₀ = 9 m/s

A block is given a push so that it starts sliding up a ramp at 20° with a speed of 9 m/s. The coefficient of kinetic friction is 0.2. Use g = 9.81 m/s². How far d along the ramp does it slide before it stops?

v₀ = 9 m/sθ = 20°μ = 0.2g = 9.81 m/s²
d = m
5.Projectile motionMedium
v0​ = 16 m/s30°x = ?

A ball is launched at 30° above horizontal from level ground. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 16 m/sθ = 30°g = 9.81 m/s²
x = m
6.Projectile motionHard
h = 30 mv0​ = 25 m/s30°H = ?

A ball is launched at 25 m/s and 30° above the horizontal from the top of a 30 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the greatest height H above the ground at the foot of the cliff.

v₀ = 25 m/sθ = 30°h = 30 mg = 9.81 m/s²
H = m
7.Circular motionMedium
r = 55 mvmax​ = ?

A car takes a flat curve of radius 55 m. The coefficient of static friction between tyres and road is 0.3. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 55 mμs = 0.3g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
R = 7 mh = 24.5 m

A 2 kg cart is released from rest at a height of 24.5 m on a frictionless track and runs through a vertical loop of radius 7 m. Use g = 9.81 m/s². Find the normal force Nbottom of the track on the cart at the bottom of the loop.

m = 2 kgh = 24.5 mR = 7 mg = 9.81 m/s²
Nbottom = N
9.Work & energyMedium
0.05 kgk = 200 N/mh = ?

A toy launcher has a vertical spring of stiffness 200 N/m. A 0.05 kg ball is placed on it and the spring is compressed by 8 cm, then released. Ignoring air resistance and the spring’s mass, find the height h the ball rises, measured from its position when the spring was compressed.

m = 0.05 kgk = 200 N/mx = 8 cmg = 9.81 m/s²
h = m
10.Work & energyHard
h = 1 mL = 1 mμ = 0.25k = 4000 N/m

A 2 kg block is released from rest at height 1 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 1 m long (μ = 0.25) and then runs onto a spring (k = 4000 N/m) on a smooth surface. Find the speed v of the block when it reaches the spring.

m = 2 kgh = 1 mL = 1 mμ = 0.25k = 4000 N/mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
11 kg64 m/s3 kgv′2​ = ?

A 14 kg projectile moving horizontally at 29 m/s explodes into two fragments that move along the same line. The 11 kg fragment continues forwards at 64 m/s. Find the velocity v′2 of the 3 kg fragment (positive in the original direction).

M = 14 kgu = 29 m/sm1 = 11 kgv′1 = 64 m/sm2 = 3 kg
v′2 = m/s
12.Momentum & collisionsHard
1.5 kgv = ?8 g35°L = 1.9 m

An 8 g bullet is fired horizontally into a 1.5 kg block hanging from light strings 1.9 m long, and stays in it. The strings swing out to a largest angle of 35° from the vertical. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 8 gM = 1.5 kgL = 1.9 mθ = 35°g = 9.81 m/s²
v = m/s
13.Rigid-body rotationMedium
ω = ?L = 2.4 mm = 3 kg

A uniform slender rod of mass 3 kg and length 2.4 m is pinned at one end and released from rest in a horizontal position. Ignore friction and use g = 9.81 m/s². Find the angular velocity ω of the rod as it swings through the vertical position.

m = 3 kgL = 2.4 mg = 9.81 m/s²
ω = rad/s
14.Rigid-body rotationHard
320 m/s35 g0.34 mL = 0.6 m10 kg

A uniform slender rod of mass 10 kg and length 0.6 m hangs at rest from a frictionless pivot at its top end. A 35 g bullet moving horizontally at 320 m/s hits the rod 0.34 m below the pivot and stays embedded. Find the angular velocity ω of the rod just after the impact.

M = 10 kgL = 0.6 mm = 35 gv = 320 m/sd = 0.34 m
ω = rad/s
15.Gears & gear trainsMedium
N1​N2​ = ?

Two parallel shafts are 150 mm apart. They must be connected by a pair of spur gears with a module of 4 mm and a speed reduction of 2 : 1. How many teeth N2 must the gear have?

a = 150 mmm = 4 mmi = 2
N2 =
16.Gears & gear trainsHard
A = 50B = 72C = 32D = 80

In a compound gear train, gear A (50 teeth) on the input shaft turning at 2900 rpm drives gear B (72 teeth). Gear C (32 teeth) is fixed to the same shaft as B and drives gear D (80 teeth) on the output shaft. Find the output speed nout.

nin = 2900 rpmA = 50B = 72C = 32D = 80
nout = rpm
17.Springs & pendulumsMedium
t (s)x (cm)0.35 s

A 0.4 kg mass on a spring with k = 170 N/m is pulled 14 cm in the positive direction and released from rest at t = 0. Find its displacement x from equilibrium at t = 0.35 s (with sign).

m = 0.4 kgk = 170 N/mA = 14 cmt = 0.35 s
x = cm
18.Springs & pendulumsHard
mk = 190 N/mA = 10 cmx = 4 cm

A mass on a spring with k = 190 N/m oscillates on a frictionless surface with an amplitude of 10 cm. Find its kinetic energy K when it is 4 cm from equilibrium.

k = 190 N/mA = 10 cmx = 4 cm
K = J
19.Mechanical vibrationsMedium
tx12 mm2 cycles5.6 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 12 mm is followed 2 cycles later by a peak of 5.6 mm. Find the damping ratio ζ.

x0 = 12 mmx2 = 5.6 mmn = 2
ζ =
20.Mechanical vibrationsHard
k1​ = 40k2​ = 25k3​ = 5m = 40 kg

A 40 kg mass hangs from spring k₃ = 5 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 40 kN/m and k₂ = 25 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 40 kgk1 = 40 kN/mk2 = 25 kN/mk3 = 5 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: s = 15.63 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 45/3.6 = 12.5 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 12.5²/(2·5) = 15.63 m

Answer

s = 15.63 m
2.Kinematics

Answer: t = 2.855 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−20 = 7·t − ½·9.81·t²
4.905·t² − 7·t − 20 = 0

Solve the quadratic

Only the positive root is physical.

t = (7 + √(7² + 2·9.81·20))/9.81 = 2.855 s

Answer

t = 2.855 s
3.Newton’s laws

Answer: μ = 0.04995

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Deceleration

a = v₀²/(2d) = 7²/(2·50) = 0.49 m/s²

Friction coefficient

μ·m·g = m·a → μ = a/g = 0.49/9.81 = 0.04995

Answer

μ = 0.04995
4.Newton’s laws

Answer: d = 7.79 m

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Deceleration

Both forces point down the slope; the mass cancels.

a = 9.81·(sin 20° + 0.2·cos 20°) = 5.199 m/s²

Distance

d = v₀²/(2a) = 9²/(2·5.199) = 7.79 m

Answer

d = 7.79 m
5.Projectile motion

Answer: x = 22.6 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 16·cos 30° = 13.86 m/s
vy = v0·sin θ = 16·sin 30° = 8 m/s

Time in the air

Starting and landing at the same height: t = 2vy/g.

t = 2·8/9.81 = 1.631 s

Horizontal distance

x = vx·t = 13.86·1.631 = 22.6 m

Answer

x = 22.6 m
6.Projectile motion

Answer: H = 37.96 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Vertical launch speed

vy = 25·sin 30° = 12.5 m/s

Rise above the cliff

Δh = vy²/(2g) = 12.5²/(2·9.81) = 7.964 m

Height above the ground

H = 30 + 7.964 = 37.96 m

Answer

H = 37.96 m
7.Circular motion

Answer: vmax = 12.72 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.3·9.81·55) = 12.72 m/s

Answer

vmax = 12.72 m/s (45.8 km/h)
8.Circular motion

Answer: Nbottom = 157 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Speed from energy conservation

v² = 2·9.81·24.5 = 480.7 m²/s²

Forces

Towards the centre is positive.

N = m·v²/R + m·g = 2·480.7/7 + 19.62 = 157 N

Answer

Nbottom = 157 N
9.Work & energy

Answer: h = 1.305 m

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Spring energy

x = 8 cm = 0.08 m
½kx² = ½·200·0.08² = 0.64 J

Height

m·g = 0.05·9.81 = 0.4905 N
h = ½kx²/(mg) = 0.64/0.4905 = 1.305 m

Answer

h = 1.305 m
10.Work & energy

Answer: v = 3.836 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 19.62·(1 − 0.25·1) = 14.71 J

Speed at the spring

½mv² = mg(h − μL) → v = √(2g(h − μL)) = √(2·9.81·0.75) = 3.836 m/s

Answer

v = 3.836 m/s
11.Momentum & collisions

Answer: v′2 = −99.33 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum before

p = M·u = 14·29 = 406 kg·m/s

Momentum after

406 = 11·64 + 3·v′2
v′2 = (406 − 704)/3 = −99.33 m/s

Answer

v′2 = −99.33 m/s

The minus sign means the second fragment flies backwards.

12.Momentum & collisions

Answer: v = 489.4 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Rise of the block

h = L·(1 − cos θ) = 1.9·(1 − cos 35°) = 0.3436 m

Speed after impact

V = √(2·9.81·0.3436) = 2.596 m/s

Collision

v = (m + M)·V/m = 1.508·2.596/0.008 = 489.4 m/s

Answer

v = 489.4 m/s
13.Rigid-body rotation

Answer: ω = 3.502 rad/s

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Loss of potential energy

m·g·L/2 = 3·9.81·1.2 = 35.32 J

Moment of inertia about the pin

IO = m·L²/3 = 3·2.4²/3 = 5.76 kg·m²

Energy balance

½·IO·ω² = 35.32 → ω = √(2·35.32/5.76) = 3.502 rad/s

Answer

ω = 3.502 rad/s
14.Rigid-body rotation

Answer: ω = 3.163 rad/s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Moment of inertia after the impact

I = M·L²/3 + m·d² = 10·0.6²/3 + 0.035·0.34² = 1.204 kg·m²

Angular momentum about the pivot

The pivot force passes through the pivot, so it has no moment there during the impact.

m·v·d = I·ω → ω = 0.035·320·0.34/1.204 = 3.163 rad/s

Answer

ω = 3.163 rad/s
15.Gears & gear trains

Answer: N2 = 50

Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.

Total number of teeth

N1 + N2 = 2a/m = 2·150/4 = 75

Split by the ratio

N1 = 75/(1 + 2) = 25
N2 = 2·25 = 50

Answer

N2 = 50
16.Gears & gear trains

Answer: nout = 805.6 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

First stage

nB = 2900·50/72 = 2014 rpm = nC

Second stage

nout = 2014·32/80 = 805.6 rpm

Answer

nout = 805.6 rpm

total ratio = 3.6 : 1

17.Springs & pendulums

Answer: x = 8.344 cm

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(170/0.4) = 20.62 rad/s
ω·t = 20.62·0.35 = 7.215 rad

Displacement

x = A·cos(ω·t) = 14·cos(7.215) = 8.344 cm

Answer

x = 8.344 cm
18.Springs & pendulums

Answer: K = 0.798 J

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Total energy

E = ½·k·A² = ½·190·0.1² = 0.95 J

Spring energy at x

U = ½·k·x² = ½·190·0.04² = 0.152 J

Kinetic energy

K = 0.95 − 0.152 = 0.798 J

Answer

K = 0.798 J
19.Mechanical vibrations

Answer: ζ = 0.06054

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/2)·ln(12/5.6) = 0.3811

Damping ratio

ζ = δ/√(4π² + δ²) = 0.3811/√(39.48 + 0.1452) = 0.06054

Answer

ζ = 0.06054
20.Mechanical vibrations

Answer: fn = 1.715 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 40 + 25 = 65 kN/m
keq = 65·5/(65 + 5) = 4.643 kN/m

Natural frequency

ωn = √(4643/40) = 10.77 rad/s
fn = 10.77/(2π) = 1.715 Hz

Answer

fn = 1.715 Hz

ExamProblems · examproblems.com/courses/dynamics