Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)3.03 s16.67

A car driving at 60 km/h brakes with a constant deceleration of 5.5 m/s² until it stops. Find the braking distance s.

v₀ = 60 km/ha = −5.5 m/s²v = 0
s = m
2.KinematicsHard
d = ?

A stone is dropped from rest into a well. The splash is heard 3.2 s after the stone is released. The speed of sound is 343 m/s; ignore air resistance and use g = 9.81 m/s². Find the depth d of the well.

ttotal = 3.2 svsound = 343 m/sg = 9.81 m/s²
d = m
3.Newton’s lawsMedium
θ = 40°a = ?m = 11 kg

An 11 kg block slides down a slope at 40° to the horizontal. The coefficient of kinetic friction is 0.1. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 11 kgθ = 40°μ = 0.1g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
9 kg2 kgTF = 65 Nμ = 0.25

Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 65 N pulls the front 2 kg block; the 9 kg block is towed behind. The coefficient of kinetic friction is 0.25 for both blocks. Use g = 9.81 m/s². Find the tension T in the connecting string.

m1 = 9 kgm2 = 2 kgF = 65 Nμ = 0.25g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = 40 m/sθ = ?R = 130 m

A ball is launched from level ground at 40 m/s and must land 130 m away. Ignore air resistance and use g = 9.81 m/s². Find the smaller of the two possible launch angles θ.

v₀ = 40 m/sR = 130 mg = 9.81 m/s²
θ = °
6.Projectile motionHard
h = 45 mv0​ = 12 m/s45°x = ?

A ball is launched at 45° above horizontal from the top of a 45 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 12 m/sθ = 45°h = 45 mg = 9.81 m/s²
x = m
7.Circular motionMedium
θ = 15°to centrev = ?

A curve of radius 170 m is banked at 15°. At what speed v can a car take it with no friction needed at all? Use g = 9.81 m/s².

r = 170 mθ = 15°g = 9.81 m/s²
v = m/s
8.Circular motionHard
r = 0.9 mv = 4 m/s

A 1.5 kg ball on a string 0.9 m long is swung in a vertical circle. At the lowest point it moves at 4 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.

m = 1.5 kgr = 0.9 mv = 4 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
36 km/h2°1800 kg

A 1800 kg car drives up a 2° slope at a constant 36 km/h. Air resistance and rolling resistance together amount to 650 N. Find the power P the wheels must deliver, in kW.

m = 1800 kgθ = 2°Fr = 650 Nv = 36 km/hg = 9.81 m/s²
P = kW
10.Work & energyHard
h = 6.4 mR = 2 mN = ?

A 5 kg cart is released from rest at a height of 6.4 m on a smooth track that leads into a vertical circular loop of radius 2 m. Find the normal force N the track exerts on the cart at the top of the loop.

m = 5 kgh = 6.4 mR = 2 mg = 9.81 m/s²
N = N
11.Momentum & collisionsMedium
3 kg4 m/s4 kg

A 3 kg glider moving at 4 m/s makes a perfectly elastic head-on collision with a 4 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).

m1 = 3 kgm2 = 4 kgv1 = 4 m/sv2 = 0
v′1 = m/s
12.Momentum & collisionsHard
13 m/s9 m/s

A 0.55 kg ball hits a wall at 13 m/s and bounces straight back at 9 m/s. The contact lasts 40 ms. Find the magnitude of the impulse J the wall gives the ball.

m = 0.55 kgvin = 13 m/svout = 9 m/sΔt = 40 ms
J = N·s
13.Rigid-body rotationMedium
3.5 kgaαM = 11.5 kgR = 0.15 m

A 3.5 kg block hangs from a light cord wrapped around a pulley, a uniform solid disc of mass 11.5 kg and radius 0.15 m that turns on a frictionless horizontal axle. The block is released from rest. Use g = 9.81 m/s². Find the acceleration a of the block.

m = 3.5 kgM = 11.5 kgR = 0.15 mg = 9.81 m/s²
a = m/s²
14.Rigid-body rotationHard
θ = 20°vs = 7.5 m

A solid cylinder starts from rest and rolls without slipping down a slope inclined at 20° to the horizontal. Use g = 9.81 m/s². Its radius is 0.3 m. Find its angular velocity ω after it has rolled 7.5 m along the slope.

θ = 20°s = 7.5 mI = ½·m·r²g = 9.81 m/s²r = 0.3 m
ω = rad/s
15.Gears & gear trainsMedium
N1​ = ?N2​

Two parallel shafts are 96 mm apart. They must be connected by a pair of spur gears with a module of 3 mm and a speed reduction of 3 : 1. How many teeth N1 must the pinion have?

a = 96 mmm = 3 mmi = 3
N1 =
16.Gears & gear trainsHard
A = 15B = 16C = 20D = 30

A 2.2 kW motor at 960 rpm drives gear A (15 teeth), which meshes with gear B (16 teeth). Gear C (20 teeth) on the same shaft as B drives gear D (30 teeth) on the output shaft. Each gear mesh has an efficiency of 97%. Find the output torque Tout.

P = 2.2 kWnin = 960 rpmA = 15B = 16C = 20D = 30ηmesh = 97%
Tout = N·m
17.Springs & pendulumsMedium
t (s)x (cm)0.85 s

A 4 kg mass on a spring with k = 150 N/m is pulled 3 cm in the positive direction and released from rest at t = 0. Find its displacement x from equilibrium at t = 0.85 s (with sign).

m = 4 kgk = 150 N/mA = 3 cmt = 0.85 s
x = cm
18.Springs & pendulumsHard
0.5 kgk = 30 N/mA = 16 cm

A 0.5 kg mass on a spring with k = 30 N/m is pulled 16 cm from equilibrium and released. Find its maximum acceleration amax.

m = 0.5 kgk = 30 N/mA = 16 cm
amax = m/s²
19.Mechanical vibrationsMedium
tx20 mm1 cycle17.6 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 20 mm is followed one cycle later by a peak of 17.6 mm. Find the damping ratio ζ.

x0 = 20 mmx1 = 17.6 mmn = 1
ζ =
20.Mechanical vibrationsHard
k1​ = 25k2​ = 10k3​ = 25m = 25 kg

A 25 kg mass hangs from spring k₃ = 25 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 25 kN/m and k₂ = 10 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 25 kgk1 = 25 kN/mk2 = 10 kN/mk3 = 25 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: s = 25.25 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 60/3.6 = 16.67 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 16.67²/(2·5.5) = 25.25 m

Answer

s = 25.25 m
2.Kinematics

Answer: d = 46.1 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Two parts of the time

½·9.81·t₁² = 343·(3.2 − t₁)
4.905·t₁² + 343·t₁ − 1098 = 0

Fall time

Only the positive root is physical.

t₁ = (−343 + √(343² + 4·4.905·1098))/(2·4.905) = 3.066 s

Depth

d = ½·9.81·3.066² = 46.1 m

Answer

d = 46.1 m
3.Newton’s laws

Answer: a = 5.554 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 40° − 0.1·cos 40°) = 9.81·(0.6428 − 0.0766) = 5.554 m/s²

Answer

a = 5.554 m/s²
4.Newton’s laws

Answer: T = 53.18 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Whole system

a = (F − μ·(m1 + m2)·g)/(m1 + m2) = (65 − 26.98)/11 = 3.457 m/s²

Rear block alone

T = m1·(a + μ·g) = 9·(3.457 + 2.453) = 53.18 N

Answer

T = 53.18 N

With the same μ on both blocks, friction drops out: T = F·m₁/(m₁ + m₂).

5.Projectile motion

Answer: θ = 26.43 °

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Range formula

R = v₀²·sin 2θ/g → sin 2θ = 9.81·130/40² = 0.7971

Angle

2θ = 52.85° → θ = 26.43°

Answer

θ = 26.43°

The other solution is 90° − θ = 63.57°.

6.Projectile motion

Answer: x = 34.07 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 12·cos 45° = 8.485 m/s
vy = v0·sin θ = 12·sin 45° = 8.485 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 45 + 8.485·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (8.485 + √(72 + 882.9))/9.81 = 4.015 s

Horizontal distance

x = vx·t = 8.485·4.015 = 34.07 m

Answer

x = 34.07 m
7.Circular motion

Answer: v = 21.14 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Force balance

N·cos θ = m·g, N·sin θ = m·v²/r → tan θ = v²/(r·g)

Speed

v = √(r·g·tan θ) = √(170·9.81·tan 15°) = 21.14 m/s

Answer

v = 21.14 m/s
(76.1 km/h)
8.Circular motion

Answer: T = 41.38 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the lowest point

Towards the centre (up) is positive.

T − m·g = m·v²/r
T = 1.5·9.81 + 1.5·4²/0.9 = 14.71 + 26.67 = 41.38 N

Answer

T = 41.38 N
9.Work & energy

Answer: P = 12.66 kW

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). Power is force times speed: P = F·v.

Driving force

m·g = 1800·9.81 = 17658 N
mg·sin θ = 17658·sin 2° = 616.3 N
F = 616.3 + 650 = 1266 N

Power

v = 36/3.6 = 10 m/s
P = F·v = 1266·10 = 12663 W = 12.66 kW

Answer

P = 12.66 kW
10.Work & energy

Answer: N = 68.67 N

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.

Speed at the top

v² = 2g(h − 2R) = 2·9.81·(6.4 − 4) = 47.09 m²/s²

Forces at the top

m·g = 5·9.81 = 49.05 N
N = mv²/R − mg = 5·47.09/2 − 49.05 = 68.67 N

Answer

N = 68.67 N

The cart just makes it round when h = 2.5R; then N = 0 at the top.

11.Momentum & collisions

Answer: v′1 = −0.5714 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (3 − 4)/(3 + 4)·4 = −0.5714 m/s
v′2 = 2·3/(3 + 4)·4 = 3.429 m/s

Answer

v′1 = −0.5714 m/s

The minus sign means the first glider bounces back.

12.Momentum & collisions

Answer: J = 12.1 N·s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.55·(9 + 13) = 12.1 N·s

Answer

J = 12.1 N·s
13.Rigid-body rotation

Answer: a = 3.712 m/s²

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Block and pulley

block: m·g − T = m·a
pulley: T·R = I·α = ½·M·R²·(a/R) → T = ½·M·a

Acceleration

a = m·g/(m + M/2) = 3.5·9.81/(3.5 + 5.75) = 3.712 m/s²

Answer

a = 3.712 m/s²
14.Rigid-body rotation

Answer: ω = 19.31 rad/s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Height dropped

h = s·sin θ = 7.5·sin 20° = 2.565 m

Energy balance with rolling

Rolling without slipping: ω = v/r, and friction does no work at the contact point.

m·g·h = ½·m·v²·(1 + 0.5)
v = √(2·9.81·2.565/1.5) = 5.792 m/s
ω = v/r = 5.792/0.3 = 19.31 rad/s

Answer

ω = 19.31 rad/s
15.Gears & gear trains

Answer: N1 = 16

Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.

Total number of teeth

N1 + N2 = 2a/m = 2·96/3 = 64

Split by the ratio

N1 = 64/(1 + 3) = 16

Answer

N1 = 16
16.Gears & gear trains

Answer: Tout = 32.94 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Output speed

nout = 960·(15/16)·(20/30) = 600 rpm
ωout = 2π·600/60 = 62.83 rad/s

Output power and torque

Pout = 2200·0.97² = 2070 W
Tout = Pout/ωout = 2070/62.83 = 32.94 N·m

Answer

Tout = 32.94 N·m
17.Springs & pendulums

Answer: x = 1.419 cm

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(150/4) = 6.124 rad/s
ω·t = 6.124·0.85 = 5.205 rad

Displacement

x = A·cos(ω·t) = 3·cos(5.205) = 1.419 cm

Answer

x = 1.419 cm
18.Springs & pendulums

Answer: amax = 9.6 m/s²

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(30/0.5) = 7.746 rad/s

Maximum acceleration

amax = A·ω² = 0.16·7.746² = 9.6 m/s²

Answer

amax = 9.6 m/s²
19.Mechanical vibrations

Answer: ζ = 0.02034

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/1)·ln(20/17.6) = 0.1278

Damping ratio

ζ = δ/√(4π² + δ²) = 0.1278/√(39.48 + 0.01634) = 0.02034

Answer

ζ = 0.02034
20.Mechanical vibrations

Answer: fn = 3.844 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 25 + 10 = 35 kN/m
keq = 35·25/(35 + 25) = 14.58 kN/m

Natural frequency

ωn = √(14583/25) = 24.15 rad/s
fn = 24.15/(2π) = 3.844 Hz

Answer

fn = 3.844 Hz

ExamProblems · examproblems.com/courses/dynamics