Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)4 s20

A car driving at 72 km/h brakes with a constant deceleration of 5 m/s² until it stops. Find the braking distance s.

v₀ = 72 km/ha = −5 m/s²v = 0
s = m
2.KinematicsHard
t (s)v (m/s)12 s

A tram starts from rest and accelerates at 2 m/s² for 12 s, then runs at constant speed for 12 s, and finally brakes at 4 m/s² until it stops. Find the total distance s between the two stops.

a1 = 2 m/s²t1 = 12 st2 = 12 sa3 = −4 m/s²
s = m
3.Newton’s lawsMedium
boxv₀ = 9 m/sμ = ?

A box slides across a level floor with an initial speed of 9 m/s and comes to rest after 41 m. Use g = 9.81 m/s². Find the coefficient of kinetic friction μ.

v₀ = 9 m/sd = 41 mg = 9.81 m/s²
μ =
4.Newton’s lawsHard
m1​ = 6.5 kg10 kgθ = 20°

A 6.5 kg block on a ramp at 20° is connected by a light string over a frictionless pulley at the top of the ramp to a hanging 10 kg mass. The hanging mass moves down. The coefficient of kinetic friction between block and ramp is 0.25. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 6.5 kgm2 = 10 kgθ = 20°μ = 0.25g = 9.81 m/s²
T = N
5.Projectile motionMedium
10 my = ?v0​ = 12 m/s35°

A ball is kicked from level ground at 12 m/s and 35° above the horizontal towards a wall 10 m away. Ignore air resistance and use g = 9.81 m/s². At what height y does the ball pass the wall?

v₀ = 12 m/sθ = 35°x = 10 mg = 9.81 m/s²
y = m
6.Projectile motionHard
3 mv0​ = 18 m/s35°x = ?

A ball is thrown from ground level at 18 m/s and 35° above the horizontal. It lands on the flat roof of a building 3 m high, on its way down. Ignore air resistance and use g = 9.81 m/s². Find the horizontal distance x from the launch point to where it lands.

v₀ = 18 m/sθ = 35°hroof = 3 mg = 9.81 m/s²
x = m
7.Circular motionMedium
θ = ?to centre40 km/h

A road engineer wants cars to take a curve of radius 280 m at 40 km/h without relying on friction. Use g = 9.81 m/s². Find the banking angle θ.

r = 280 mv = 40 km/hg = 9.81 m/s²
θ = °
8.Circular motionHard
R = 4 mh = 13.6 m

A 2.5 kg cart is released from rest at a height of 13.6 m on a frictionless track and runs through a vertical loop of radius 4 m. Use g = 9.81 m/s². Find the normal force Nbottom of the track on the cart at the bottom of the loop.

m = 2.5 kgh = 13.6 mR = 4 mg = 9.81 m/s²
Nbottom = N
9.Work & energyMedium
30°L = 3 m10 kg

A 10 kg ball hangs on a light string of length 3 m. It is pulled aside until the string makes 30° with the vertical and released from rest. Find the tension T in the string when the ball passes the lowest point.

m = 10 kgL = 3 mθ = 30°g = 9.81 m/s²
T = N
10.Work & energyHard
h = 17.5 mR = 5 mv = ?

A 5 kg cart is released from rest at a height of 17.5 m on a smooth track that leads into a vertical circular loop of radius 5 m. Find the speed v of the cart at the top of the loop.

m = 5 kgh = 17.5 mR = 5 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
3 kg56 m/s4 kgv′2​ = ?

A 7 kg projectile moving horizontally at 32 m/s explodes into two fragments that move along the same line. The 3 kg fragment continues forwards at 56 m/s. Find the velocity v′2 of the 4 kg fragment (positive in the original direction).

M = 7 kgu = 32 m/sm1 = 3 kgv′1 = 56 m/sm2 = 4 kg
v′2 = m/s
12.Momentum & collisionsHard
1700 kg17 m/s1600 kg22 m/sθ = ?

At a crossing a 1700 kg car travelling east at 17 m/s collides with a 1600 kg car travelling north at 22 m/s. The cars lock together. Find the direction θ of the wreck just after the collision, measured north of east.

m1 = 1700 kgv1 = 17 m/s (E)m2 = 1600 kgv2 = 22 m/s (N)
θ = °
13.Rigid-body rotationMedium
L = 2.3 mm = 8.5 kgα

A uniform slender rod of mass 8.5 kg and length 2.3 m is pinned at one end and held horizontal. It is released from rest. Use g = 9.81 m/s². Find the vertical force R that the pin exerts on the rod just after release.

m = 8.5 kgL = 2.3 mg = 9.81 m/s²
R = N
14.Rigid-body rotationHard
460 m/s5 g0.65 mL = 1 m2.5 kg

A uniform slender rod of mass 2.5 kg and length 1 m hangs at rest from a frictionless pivot at its top end. A 5 g bullet moving horizontally at 460 m/s hits the rod 0.65 m below the pivot and stays embedded. Find the angular velocity ω of the rod just after the impact.

M = 2.5 kgL = 1 mm = 5 gv = 460 m/sd = 0.65 m
ω = rad/s
15.Gears & gear trainsMedium
N1​ = 15N2​ = 80

A 3 kW motor running at 960 rpm drives a pinion with 15 teeth, which meshes with a gear with 80 teeth. The gear pair has an efficiency of 97%. Find the torque T1 on the motor shaft.

P = 3 kWn1 = 960 rpmN1 = 15N2 = 80η = 97%
T1 = N·m
16.Gears & gear trainsHard
d1​ = 125 mmd2​ = 400 mm720 rpmC = 800 mmθ = ?

An open belt connects a 125 mm pulley and a 400 mm pulley whose centres are 800 mm apart. Find the angle of wrap θ on the smaller pulley, in degrees.

d1 = 125 mmd2 = 400 mmC = 800 mm
θ = °
17.Springs & pendulumsMedium
t (s)x (cm)1.25 s

A 3.6 kg mass on a spring with k = 330 N/m is pulled 12 cm in the positive direction and released from rest at t = 0. Find its displacement x from equilibrium at t = 1.25 s (with sign).

m = 3.6 kgk = 330 N/mA = 12 cmt = 1.25 s
x = cm
18.Springs & pendulumsHard
0.8 kgk = 400 N/m

A 0.8 kg mass is attached to the lower end of an unstretched vertical spring with k = 400 N/m and released from rest. Use g = 9.81 m/s². Find the greatest speed vmax of the mass.

m = 0.8 kgk = 400 N/mg = 9.81 m/s²
vmax = m/s
19.Mechanical vibrationsMedium
k = 20 kN/mc = 520 N·s/mm = 150 kg

A 150 kg mass is supported by a spring with a stiffness of 20 kN/m and a viscous damper with a damping coefficient of 520 N·s/m. Find the damping ratio ζ.

m = 150 kgk = 20 kN/mc = 520 N·s/m
ζ =
20.Mechanical vibrationsHard
k1​ = 25k2​ = 40m = 5 kg

A 5 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 25 kN/m and k₂ = 40 kN/m. The mass stays level. Find the equivalent stiffness keq of the spring system in kN/m.

m = 5 kgk1 = 25 kN/mk2 = 40 kN/m
keq = kN/m

3Solutions

1.Kinematics

Answer: s = 40 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 72/3.6 = 20 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 20²/(2·5) = 40 m

Answer

s = 40 m
2.Kinematics

Answer: s = 504 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Top speed

v = a1·t1 = 2·12 = 24 m/s

Distance of each phase

s1 = ½·2·12² = 144 m
s2 = 24·12 = 288 m
s3 = 24²/(2·4) = 72 m

Total distance

s = 144 + 288 + 72 = 504 m

Answer

s = 504 m
3.Newton’s laws

Answer: μ = 0.1007

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Deceleration

a = v₀²/(2d) = 9²/(2·41) = 0.9878 m/s²

Friction coefficient

μ·m·g = m·a → μ = a/g = 0.9878/9.81 = 0.1007

Answer

μ = 0.1007
4.Newton’s laws

Answer: T = 60.94 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the string

m₂·g = 98.1 N
m₁·g·sin θ = 21.81 N
μ·m₁·g·cos θ = 14.98 N

Acceleration of the system

a = (98.1 − 21.81 − 14.98)/16.5 = 3.716 m/s²

Tension from the hanging mass

m2·g − T = m2·a → T = 10·(9.81 − 3.716) = 60.94 N

Answer

T = 60.94 N
5.Projectile motion

Answer: y = 1.926 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Time to the wall

vx = 12·cos 35° = 9.83 m/s
t = x/vx = 10/9.83 = 1.017 s

Height at that time

y = 6.883·1.017 − ½·9.81·1.017² = 1.926 m

Answer

y = 1.926 m

The ball is already on its way down at the wall.

6.Projectile motion

Answer: x = 25.9 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

vx = 14.74 m/s, vy = 10.32 m/s

Time to land on the roof

Larger root: the ball is descending.

3 = 10.32·t − 4.905·t²
t = (10.32 + √(10.32² − 2·9.81·3))/9.81 = 1.757 s

Horizontal distance

x = vx·t = 14.74·1.757 = 25.9 m

Answer

x = 25.9 m
7.Circular motion

Answer: θ = 2.573 °

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Units

v = 40/3.6 = 11.11 m/s

Banking angle

tan θ = v²/(r·g) = 11.11²/(280·9.81) = 0.04495
θ = 2.573°

Answer

θ = 2.573°
8.Circular motion

Answer: Nbottom = 191.3 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Speed from energy conservation

v² = 2·9.81·13.6 = 266.8 m²/s²

Forces

Towards the centre is positive.

N = m·v²/R + m·g = 2.5·266.8/4 + 24.53 = 191.3 N

Answer

Nbottom = 191.3 N
9.Work & energy

Answer: T = 124.4 N

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.

Speed at the bottom

v² = 2gL(1 − cos θ) = 2·9.81·3·(1 − cos 30°) = 7.886 m²/s²

Forces at the bottom

m·g = 10·9.81 = 98.1 N
T = mg + mv²/L = 98.1 + 10·7.886/3 = 124.4 N

Answer

T = 124.4 N

Check: T = mg(3 − 2cos θ) = 124.4 N.

10.Work & energy

Answer: v = 12.13 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.

Speed at the top

v² = 2g(h − 2R) = 2·9.81·(17.5 − 10) = 147.2 m²/s²
v = 12.13 m/s

Answer

v = 12.13 m/s

The cart just makes it round when h = 2.5R; then N = 0 at the top.

11.Momentum & collisions

Answer: v′2 = 14 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum before

p = M·u = 7·32 = 224 kg·m/s

Momentum after

224 = 3·56 + 4·v′2
v′2 = (224 − 168)/4 = 14 m/s

Answer

v′2 = 14 m/s
12.Momentum & collisions

Answer: θ = 50.61 °

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum components

px = 1700·17 = 28900 kg·m/s
py = 1600·22 = 35200 kg·m/s

Direction

tan θ = py/px = 1.218 → θ = 50.61°

Answer

θ = 50.61°
13.Rigid-body rotation

Answer: R = 20.85 N

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Moments about the pin

At the moment of release ω = 0, so there is no centripetal acceleration and the centre accelerates straight down.

m·g·L/2 = (m·L²/3)·α → α = 3g/(2L) = 3·9.81/(2·2.3) = 6.398 rad/s²

Vertical forces

aG = α·L/2 = 7.357 m/s²
m·g − R = m·aG → R = 8.5·(9.81 − 7.357) = 20.85 N

Answer

R = 20.85 N

R = m·g/4, independent of the length.

14.Rigid-body rotation

Answer: ω = 1.789 rad/s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Moment of inertia after the impact

I = M·L²/3 + m·d² = 2.5·1²/3 + 0.005·0.65² = 0.8354 kg·m²

Angular momentum about the pivot

The pivot force passes through the pivot, so it has no moment there during the impact.

m·v·d = I·ω → ω = 0.005·460·0.65/0.8354 = 1.789 rad/s

Answer

ω = 1.789 rad/s
15.Gears & gear trains

Answer: T1 = 29.84 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·960/60 = 100.5 rad/s
T1 = P/ω₁ = 3000/100.5 = 29.84 N·m

Answer

T1 = 29.84 N·m
16.Gears & gear trains

Answer: θ = 160.2 °

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Belt angle

asin(0.1719) = 9.897°

Angle of wrap

θ = 180 − 2·9.897 = 160.2°

Answer

θ = 160.2°
17.Springs & pendulums

Answer: x = 9.914 cm

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(330/3.6) = 9.574 rad/s
ω·t = 9.574·1.25 = 11.97 rad

Displacement

x = A·cos(ω·t) = 12·cos(11.97) = 9.914 cm

Answer

x = 9.914 cm
18.Springs & pendulums

Answer: vmax = 0.4387 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Equilibrium and amplitude

x₀ = m·g/k = 0.8·9.81/400 = 0.01962 m = A

Greatest speed

The speed is largest at equilibrium.

ω = √(400/0.8) = 22.36 rad/s
vmax = A·ω = 0.01962·22.36 = 0.4387 m/s

Answer

vmax = 0.4387 m/s
19.Mechanical vibrations

Answer: ζ = 0.1501

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(20000·150) = 3464 N·s/m

Damping ratio

ζ = c/cc = 520/3464 = 0.1501

Answer

ζ = 0.1501

ζ < 1, so the system is underdamped and oscillates as it decays.

20.Mechanical vibrations

Answer: keq = 65 kN/m

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 25 + 40 = 65 kN/m

Answer

keq = 65 kN/m

ExamProblems · examproblems.com/courses/dynamics