In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Kinematics
Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h
Method
List what you know: v₀, v, a, t and s, with units.
Pick the equation that contains your three knowns and the unknown.
Choose one positive direction and give opposing quantities a minus sign.
Solve and check that the answer is physically sensible.
Newton’s laws
Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ
Method
Draw a free-body diagram with every force on the body.
Choose a positive direction along the motion.
Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
Apply ΣF = m·a along the motion; friction is μ·N against the motion.
Projectile motion
Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g
Method
Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
The horizontal motion has constant speed; the vertical motion has acceleration −g.
Find the time of flight from the vertical motion.
Use that time in the horizontal motion to find the range.
Circular motion
Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)
Work & energy
Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t
Momentum & collisions
Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv
Method
Choose a positive direction and give each velocity its sign.
Write the total momentum before: Σm·v.
For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
Set momentum before equal to momentum after and solve.
Rigid-body rotation
Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω
Method
Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.
Gears & gear trains
Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios
Springs & pendulums
Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²
Mechanical vibrations
Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2
2Practice problems
1.KinematicsMedium
A car driving at 108 km/h brakes with a constant deceleration of 5 m/s² until it stops. Find the braking distance s.
v₀ = 108 km/ha = −5 m/s²v = 0
s = m
2.KinematicsHard
A stone is dropped from rest into a well. The splash is heard 3.7 s after the stone is released. The speed of sound is 343 m/s; ignore air resistance and use g = 9.81 m/s². Find the depth d of the well.
ttotal = 3.7 svsound = 343 m/sg = 9.81 m/s²
d = m
3.Newton’s lawsMedium
An 8 kg block slides down a slope at 25° to the horizontal. The coefficient of kinetic friction is 0.3. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.
m = 8 kgθ = 25°μ = 0.3g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
A 4 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 1.5 kg mass. The coefficient of kinetic friction between block and table is 0.2. Use g = 9.81 m/s². Find the acceleration a of the system.
m1 = 4 kgm2 = 1.5 kgμ = 0.2g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
A ball is launched at 55° above horizontal from level ground. Ignore air resistance. Find the maximum height H the ball reaches.
v0 = 28 m/sθ = 55°g = 9.81 m/s²
H = m
6.Projectile motionHard
A ball is launched at 30° above horizontal from the top of a 60 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.
v0 = 12 m/sθ = 30°h = 60 mg = 9.81 m/s²
t = s
7.Circular motionMedium
A car takes a flat curve of radius 20 m. The coefficient of static friction between tyres and road is 0.7. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.
r = 20 mμs = 0.7g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
A 1.4 kg ball on a light string 1 m long is swung in a vertical circle. At the lowest point its speed is 12 m/s. Ignore air resistance and use g = 9.81 m/s². Find the tension Ttop in the string at the highest point.
m = 1.4 kgr = 1 mvbottom = 12 m/sg = 9.81 m/s²
Ttop = N
9.Work & energyMedium
A 10 kg ball hangs on a light string of length 0.5 m. It is pulled aside until the string makes 60° with the vertical and released from rest. Find the tension T in the string when the ball passes the lowest point.
m = 10 kgL = 0.5 mθ = 60°g = 9.81 m/s²
T = N
10.Work & energyHard
A 0.5 kg block is released from rest at height 4.5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 4.5 m long (μ = 0.3) and then runs onto a spring (k = 5000 N/m) on a smooth surface. Find the speed v of the block when it reaches the spring.
m = 0.5 kgh = 4.5 mL = 4.5 mμ = 0.3k = 5000 N/mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
A 10 kg projectile moving horizontally at 28 m/s explodes into two fragments that move along the same line. The 5 kg fragment continues forwards at 55 m/s. Find the velocity v′2 of the 5 kg fragment (positive in the original direction).
M = 10 kgu = 28 m/sm1 = 5 kgv′1 = 55 m/sm2 = 5 kg
v′2 = m/s
12.Momentum & collisionsHard
A 1500 kg car runs into a parked 900 kg car. The wrecks lock together and skid 21.5 m before stopping. The coefficient of kinetic friction between tyres and road is 0.8. Use g = 9.81 m/s². Find the speed v1 of the first car just before the collision.
A 9 kg block hangs from a light cord wrapped around a pulley, a uniform solid disc of mass 6 kg and radius 0.25 m that turns on a frictionless horizontal axle. The block is released from rest. Use g = 9.81 m/s². Find the angular acceleration α of the pulley.
m = 9 kgM = 6 kgR = 0.25 mg = 9.81 m/s²
α = rad/s²
14.Rigid-body rotationHard
A thin hoop of mass 0.5 kg rolls without slipping at 1.5 m/s. Find its total kinetic energy Ek.
m = 0.5 kgv = 1.5 m/sI = m·r²
Ek = J
15.Gears & gear trainsMedium
A 100 mm pulley at 1500 rpm drives a 315 mm pulley by a belt with 3 % slip. Find the speed n2 of the driven pulley.
n1 = 1500 rpmd1 = 100 mmd2 = 315 mms = 3 %
n2 = rpm
16.Gears & gear trainsHard
An 11 kW motor at 1440 rpm drives gear A (15 teeth), which meshes with gear B (36 teeth). Gear C (24 teeth) on the same shaft as B drives gear D (40 teeth) on the output shaft. Each gear mesh has an efficiency of 97%. Find the output torque Tout.
An astronaut on another planet finds that a simple pendulum 1.7 m long has a period of 4.25 s for small swings. Find the gravitational acceleration g on that planet.
L = 1.7 mT = 4.25 s
g = m/s²
18.Springs & pendulumsHard
A body oscillates in simple harmonic motion with period 1.6 s and amplitude 14 cm. What is the shortest time t it needs to move from its maximum displacement of 14 cm to a displacement of 4.2 cm?
T = 1.6 sA = 14 cmx = 4.2 cm
t = s
19.Mechanical vibrationsMedium
A 100 kg mass is supported by a spring with a stiffness of 40 kN/m and a viscous damper with a damping coefficient of 600 N·s/m. Find the damping ratio ζ.
m = 100 kgk = 40 kN/mc = 600 N·s/m
ζ =
20.Mechanical vibrationsHard
A 20 kg mass hangs from spring k₃ = 15 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 5 kN/m and k₂ = 40 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.
m = 20 kgk1 = 5 kN/mk2 = 40 kN/mk3 = 15 kN/m
fn = Hz
3Solutions
1.Kinematics
Answer: s = 90 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v₀ = 108/3.6 = 30 m/s
Braking distance
0 = v₀² − 2·a·s → s = v₀²/(2a) = 30²/(2·5) = 90 m
Answer
s = 90 m
2.Kinematics
Answer: d = 60.86 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Two parts of the time
½·9.81·t₁² = 343·(3.7 − t₁)
4.905·t₁² + 343·t₁ − 1269 = 0
Fall time
Only the positive root is physical.
t₁ = (−343 + √(343² + 4·4.905·1269))/(2·4.905) = 3.523 s
Depth
d = ½·9.81·3.523² = 60.86 m
Answer
d = 60.86 m
3.Newton’s laws
Answer: a = 1.479 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 28·cos 55° = 16.06 m/s
vy = v0·sin θ = 28·sin 55° = 22.94 m/s
Highest point
At the top the vertical velocity is zero: vy² = 2gH.
H = vy²/(2g) = 22.94²/(2·9.81) = 26.81 m
Answer
H = 26.81 m
6.Projectile motion
Answer: t = 4.162 s
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 12·cos 30° = 10.39 m/s
vy = v0·sin θ = 12·sin 30° = 6 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 60 + 6·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (6 + √(36 + 1177))/9.81 = 4.162 s
Answer
t = 4.162 s
7.Circular motion
Answer: vmax = 11.72 m/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Friction provides the centripetal force
m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.7·9.81·20) = 11.72 m/s
Answer
vmax = 11.72 m/s (42.19 km/h)
8.Circular motion
Answer: Ttop = 132.9 N
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Speed at the top
Kinetic energy is traded for potential energy over a height 2r.
vtop² = 12² − 4·9.81·1 = 104.8 m²/s²
Forces at the top
Tension and gravity both point down, towards the centre.
T + m·g = m·vtop²/r
T = 1.4·104.8/1 − 1.4·9.81 = 132.9 N
Answer
Ttop = 132.9 N
9.Work & energy
Answer: T = 196.2 N
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.
Speed at the bottom
v² = 2gL(1 − cos θ) = 2·9.81·0.5·(1 − cos 60°) = 4.905 m²/s²
Forces at the bottom
m·g = 10·9.81 = 98.1 N
T = mg + mv²/L = 98.1 + 10·4.905/0.5 = 196.2 N
Answer
T = 196.2 N
Check: T = mg(3 − 2cos θ) = 196.2 N.
10.Work & energy
Answer: v = 7.861 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy left after the rough strip
The ramp is smooth, so only the strip removes energy.
mgh − μmgL = 4.905·(4.5 − 0.3·4.5) = 15.45 J
Speed at the spring
½mv² = mg(h − μL) → v = √(2g(h − μL)) = √(2·9.81·3.15) = 7.861 m/s
Answer
v = 7.861 m/s
11.Momentum & collisions
Answer: v′2 = 1 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Momentum before
p = M·u = 10·28 = 280 kg·m/s
Momentum after
280 = 5·55 + 5·v′2
v′2 = (280 − 275)/5 = 1 m/s
Answer
v′2 = 1 m/s
12.Momentum & collisions
Answer: v1 = 29.39 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.
Block and pulley
block: m·g − T = m·a
pulley: T·R = I·α = ½·M·R²·(a/R) → T = ½·M·a
Acceleration
a = m·g/(m + M/2) = 9·9.81/(9 + 3) = 7.358 m/s²
Angular acceleration
α = a/R = 7.358/0.25 = 29.43 rad/s²
Answer
α = 29.43 rad/s²
14.Rigid-body rotation
Answer: Ek = 1.125 J
Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.
Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.
Speed without slip
1500·100/315 = 476.2 rpm
With slip
n2 = 476.2·0.97 = 461.9 rpm
Answer
n2 = 461.9 rpm
16.Gears & gear trains
Answer: Tout = 274.5 N·m
Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.
Output speed
nout = 1440·(15/36)·(24/40) = 360 rpm
ωout = 2π·360/60 = 37.7 rad/s
Output power and torque
Pout = 11000·0.97² = 10350 W
Tout = Pout/ωout = 10350/37.7 = 274.5 N·m
Answer
Tout = 274.5 N·m
17.Springs & pendulums
Answer: g = 3.716 m/s²
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Solve for g
g = 4π²·L/T² = 4π²·1.7/4.25² = 3.716 m/s²
Answer
g = 3.716 m/s²
18.Springs & pendulums
Answer: t = 0.3224 s
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Angular frequency
ω = 2π/T = 2π/1.6 = 3.927 rad/s
Solve for the time
0.3 = cos(ω·t) → ω·t = arccos(0.3) = 1.266 rad
t = 1.266/3.927 = 0.3224 s
Answer
t = 0.3224 s
19.Mechanical vibrations
Answer: ζ = 0.15
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Critical damping
cc = 2·√(k·m) = 2·√(40000·100) = 4000 N·s/m
Damping ratio
ζ = c/cc = 600/4000 = 0.15
Answer
ζ = 0.15
ζ < 1, so the system is underdamped and oscillates as it decays.
20.Mechanical vibrations
Answer: fn = 3.775 Hz
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Equivalent stiffness
Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.