Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
a = ?s = 900 m

A plane needs a speed of 280 km/h to take off and the usable runway is 900 m long. Starting from rest, what constant acceleration a does it need?

v₀ = 0v = 280 km/hs = 900 m
a = m/s²
2.KinematicsHard
t (s)v (m/s)10 s

A tram starts from rest and accelerates at 1 m/s² for 10 s, then runs at constant speed for 29 s, and finally brakes at 4 m/s² until it stops. Find the total distance s between the two stops.

a1 = 1 m/s²t1 = 10 st2 = 29 sa3 = −4 m/s²
s = m
3.Newton’s lawsMedium
θ = 40°a = ?m = 16 kg

A 16 kg block slides down a frictionless slope at 40° to the horizontal. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 16 kgθ = 40°μ = 0g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 8 kg5 kgno friction

An 8 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 5 kg mass. The table is frictionless. Use g = 9.81 m/s². Find the acceleration a of the system.

m1 = 8 kgm2 = 5 kgμ = 0g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
v0​ = 14 m/s70°rangeH = ?

A ball is launched at 70° above horizontal from level ground. Ignore air resistance. Find the maximum height H the ball reaches.

v0 = 14 m/sθ = 70°g = 9.81 m/s²
H = m
6.Projectile motionHard
h = 20 mv0​ = 31 m/s50°α = ?

A ball is launched at 31 m/s and 50° above the horizontal from the top of a 20 m cliff. Ignore air resistance and use g = 9.81 m/s². At what angle α below the horizontal does it hit the ground?

v₀ = 31 m/sθ = 50°h = 20 mg = 9.81 m/s²
α = °
7.Circular motionMedium
r = 55 mvmax​ = ?

A car drives over the top of a hump in the road, which is a circular arc of radius 55 m. Use g = 9.81 m/s². Above what speed vmax do the wheels leave the road at the top?

r = 55 mg = 9.81 m/s²
vmax = m/s
8.Circular motionHard
R = 8.5 mh = 24.65 m

A 4.5 kg cart is released from rest at a height of 24.65 m on a frictionless track and runs through a vertical loop of radius 8.5 m. Use g = 9.81 m/s². Find the normal force Nbottom of the track on the cart at the bottom of the loop.

m = 4.5 kgh = 24.65 mR = 8.5 mg = 9.81 m/s²
Nbottom = N
9.Work & energyMedium
25°d = 13 mμ = 0.35

A block slides from rest down a slope at 25° to the horizontal. The coefficient of kinetic friction is 0.35. Find its speed v after it has slid 13 m along the slope.

θ = 25°μ = 0.35d = 13 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
h = 2 mL = 2 mμ = 0.3k = 800 N/m

A 10 kg block is released from rest at height 2 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 2 m long (μ = 0.3) and then runs onto a spring (k = 800 N/m) on a smooth surface. Find the maximum compression x of the spring.

m = 10 kgh = 2 mL = 2 mμ = 0.3k = 800 N/mg = 9.81 m/s²
x = cm
11.Momentum & collisionsMedium
3 kg54 m/s4 kgv′2​ = ?

A 7 kg projectile moving horizontally at 5 m/s explodes into two fragments that move along the same line. The 3 kg fragment continues forwards at 54 m/s. Find the velocity v′2 of the 4 kg fragment (positive in the original direction).

M = 7 kgu = 5 m/sm1 = 3 kgv′1 = 54 m/sm2 = 4 kg
v′2 = m/s
12.Momentum & collisionsHard
1200 kg8 m/s1300 kg15 m/sv′ = ?

At a crossing a 1200 kg car travelling east at 8 m/s collides with a 1300 kg car travelling north at 15 m/s. The cars lock together. Find the speed v′ of the wreck just after the collision.

m1 = 1200 kgv1 = 8 m/s (E)m2 = 1300 kgv2 = 15 m/s (N)
v′ = m/s
13.Rigid-body rotationMedium
L = 0.8 mm = 11.5 kgα

A uniform slender rod of mass 11.5 kg and length 0.8 m is pinned at one end and held horizontal. It is released from rest. Use g = 9.81 m/s². Find its angular acceleration α just after release.

m = 11.5 kgL = 0.8 mg = 9.81 m/s²
α = rad/s²
14.Rigid-body rotationHard
6.5 m/sω

A thin hoop of mass 1.5 kg rolls without slipping at 6.5 m/s. Find its rotational kinetic energy Erot.

m = 1.5 kgv = 6.5 m/sI = m·r²
Erot = J
15.Gears & gear trainsMedium
N1​ = 30N2​ = 45

A 1.5 kW motor running at 1440 rpm drives a pinion with 30 teeth, which meshes with a gear with 45 teeth. The gear pair has an efficiency of 97%. Find the torque T1 on the motor shaft.

P = 1.5 kWn1 = 1440 rpmN1 = 30N2 = 45η = 97%
T1 = N·m
16.Gears & gear trainsHard
A = 18B = 80C = 25D = 45

In a compound gear train, gear A (18 teeth) on the input shaft turning at 2900 rpm drives gear B (80 teeth). Gear C (25 teeth) is fixed to the same shaft as B and drives gear D (45 teeth) on the output shaft. Find the output speed nout.

nin = 2900 rpmA = 18B = 80C = 25D = 45
nout = rpm
17.Springs & pendulumsMedium
L = ?

How long must a simple pendulum be to have a period of 0.9 s? Use g = 9.81 m/s². Find L.

T = 0.9 sg = 9.81 m/s²
L = m
18.Springs & pendulumsHard
0.7 kgk = 30 N/mA = 17 cm

A 0.7 kg mass on a spring with k = 30 N/m is pulled 17 cm from equilibrium and released. Find its maximum speed vmax.

m = 0.7 kgk = 30 N/mA = 17 cm
vmax = m/s
19.Mechanical vibrationsMedium
k = 5 kN/mζ = 0.45m = 40 kg

A 40 kg mass on a spring with a stiffness of 5 kN/m has a viscous damper giving a damping ratio of 0.45. Find the damped natural frequency fd of its free vibration in Hz.

m = 40 kgk = 5 kN/mζ = 0.45
fd = Hz
20.Mechanical vibrationsHard
k1​ = 5k2​ = 50m = 50 kg

A 50 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 5 kN/m and k₂ = 50 kN/m. The mass stays level. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 50 kgk1 = 5 kN/mk2 = 50 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: a = 3.361 m/s²

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v = 280/3.6 = 77.78 m/s

Acceleration

a = v²/(2s) = 77.78²/(2·900) = 3.361 m/s²

Answer

a = 3.361 m/s²
2.Kinematics

Answer: s = 352.5 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Top speed

v = a1·t1 = 1·10 = 10 m/s

Distance of each phase

s1 = ½·1·10² = 50 m
s2 = 10·29 = 290 m
s3 = 10²/(2·4) = 12.5 m

Total distance

s = 50 + 290 + 12.5 = 352.5 m

Answer

s = 352.5 m
3.Newton’s laws

Answer: a = 6.306 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 40° − 0·cos 40°) = 9.81·(0.6428 − 0) = 6.306 m/s²

Answer

a = 6.306 m/s²
4.Newton’s laws

Answer: a = 3.773 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (49.05 − 0)/13 = 3.773 m/s²

Answer

a = 3.773 m/s²
5.Projectile motion

Answer: H = 8.821 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 14·cos 70° = 4.788 m/s
vy = v0·sin θ = 14·sin 70° = 13.16 m/s

Highest point

At the top the vertical velocity is zero: vy² = 2gH.

H = vy²/(2g) = 13.16²/(2·9.81) = 8.821 m

Answer

H = 8.821 m
6.Projectile motion

Answer: α = 57.2 °

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

vx = 31·cos 50° = 19.93 m/s
vy0 = 31·sin 50° = 23.75 m/s

Vertical speed at impact

Energy or v² = v₀² + 2as in the vertical direction.

vy = √(23.75² + 2·9.81·20) = 30.92 m/s

Impact angle

tan α = vy/vx = 30.92/19.93 → α = 57.2°

Answer

α = 57.2°
7.Circular motion

Answer: vmax = 23.23 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Normal force zero

m·g = m·v²/r → v = √(g·r) = √(9.81·55) = 23.23 m/s

Answer

vmax = 23.23 m/s
(83.62 km/h)
8.Circular motion

Answer: Nbottom = 300.2 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Speed from energy conservation

v² = 2·9.81·24.65 = 483.6 m²/s²

Forces

Towards the centre is positive.

N = m·v²/R + m·g = 4.5·483.6/8.5 + 44.15 = 300.2 N

Answer

Nbottom = 300.2 N
9.Work & energy

Answer: v = 5.185 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy balance along the slope

The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.

½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·13·(0.4226 − 0.35·0.9063)) = 5.185 m/s

Answer

v = 5.185 m/s
10.Work & energy

Answer: x = 58.6 cm

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 98.1·(2 − 0.3·2) = 137.3 J

Maximum compression

½kx² = 137.3 → x = √(2·137.3/800) = 0.586 m = 58.6 cm

Answer

x = 58.6 cm
11.Momentum & collisions

Answer: v′2 = −31.75 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum before

p = M·u = 7·5 = 35 kg·m/s

Momentum after

35 = 3·54 + 4·v′2
v′2 = (35 − 162)/4 = −31.75 m/s

Answer

v′2 = −31.75 m/s

The minus sign means the second fragment flies backwards.

12.Momentum & collisions

Answer: v′ = 8.694 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum components

px = 1200·8 = 9600 kg·m/s
py = 1300·15 = 19500 kg·m/s

Speed of the wreck

v′ = √(px² + py²)/(m1 + m2) = 21735/2500 = 8.694 m/s

Answer

v′ = 8.694 m/s
13.Rigid-body rotation

Answer: α = 18.39 rad/s²

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Moments about the pin

At the moment of release ω = 0, so there is no centripetal acceleration and the centre accelerates straight down.

m·g·L/2 = (m·L²/3)·α → α = 3g/(2L) = 3·9.81/(2·0.8) = 18.39 rad/s²

Answer

α = 18.39 rad/s²
14.Rigid-body rotation

Answer: Erot = 31.69 J

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Translational and rotational parts

Etrans = ½·m·v² = ½·1.5·6.5² = 31.69 J
Erot = ½·I·ω² = ½·1·m·r²·(v/r)² = 1·31.69 = 31.69 J

Answer

Erot = 31.69 J
15.Gears & gear trains

Answer: T1 = 9.947 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·1440/60 = 150.8 rad/s
T1 = P/ω₁ = 1500/150.8 = 9.947 N·m

Answer

T1 = 9.947 N·m
16.Gears & gear trains

Answer: nout = 362.5 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

First stage

nB = 2900·18/80 = 652.5 rpm = nC

Second stage

nout = 652.5·25/45 = 362.5 rpm

Answer

nout = 362.5 rpm

total ratio = 8 : 1

17.Springs & pendulums

Answer: L = 0.2013 m

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Solve for the length

L = g·(T/2π)² = 9.81·(0.9/2π)² = 0.2013 m

Answer

L = 0.2013 m
18.Springs & pendulums

Answer: vmax = 1.113 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(30/0.7) = 6.547 rad/s

Maximum speed

vmax = A·ω = 0.17·6.547 = 1.113 m/s

Answer

vmax = 1.113 m/s
19.Mechanical vibrations

Answer: fd = 1.589 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(5000/40) = 11.18 rad/s
fn = 11.18/(2π) = 1.779 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 1.779·√(1 − 0.45²) = 1.589 Hz

Answer

fd = 1.589 Hz
20.Mechanical vibrations

Answer: fn = 5.279 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 5 + 50 = 55 kN/m

Natural frequency

ωn = √(55000/50) = 33.17 rad/s
fn = 33.17/(2π) = 5.279 Hz

Answer

fn = 5.279 Hz

ExamProblems · examproblems.com/courses/dynamics