Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)t = ?15

A car driving at 54 km/h brakes with a constant deceleration of 7.5 m/s² until it stops. How long does braking take? Find t.

v₀ = 54 km/ha = −7.5 m/s²v = 0
t = s
2.KinematicsHard
v₀ = 10 m/s40 m

A ball is thrown straight up at 10 m/s from the edge of a roof 40 m above the ground. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax above the ground.

v₀ = 10 m/sh₀ = 40 mg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
θ = 45°a = ?m = 15 kg

A 15 kg block slides down a slope at 45° to the horizontal. The coefficient of kinetic friction is 0.2. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 15 kgθ = 45°μ = 0.2g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 6 kg6 kgθ = 40°

A 6 kg block on a ramp at 40° is connected by a light string over a frictionless pulley at the top of the ramp to a hanging 6 kg mass. The hanging mass moves down. The coefficient of kinetic friction between block and ramp is 0.1. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 6 kgm2 = 6 kgθ = 40°μ = 0.1g = 9.81 m/s²
T = N
5.Projectile motionMedium
24 my = ?v0​ = 28 m/s45°

A ball is kicked from level ground at 28 m/s and 45° above the horizontal towards a wall 24 m away. Ignore air resistance and use g = 9.81 m/s². At what height y does the ball pass the wall?

v₀ = 28 m/sθ = 45°x = 24 mg = 9.81 m/s²
y = m
6.Projectile motionHard
h = 25 mv0​ = 34 m/s45°H = ?

A ball is launched at 34 m/s and 45° above the horizontal from the top of a 25 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the greatest height H above the ground at the foot of the cliff.

v₀ = 34 m/sθ = 45°h = 25 mg = 9.81 m/s²
H = m
7.Circular motionMedium
L = 1.3 m45°

A small ball on a string of length 1.3 m moves in a horizontal circle so that the string makes a constant angle of 45° with the vertical (a conical pendulum). Use g = 9.81 m/s². Find the time T for one revolution.

L = 1.3 mθ = 45°g = 9.81 m/s²
T = s
8.Circular motionHard
r = 1.5 mv = ?

A ball on a string 1.5 m long is swung in a vertical circle. Use g = 9.81 m/s². What is the smallest speed vmin at the top for which the string just stays tight?

r = 1.5 mg = 9.81 m/s²
vmin = m/s
9.Work & energyMedium
72 km/h6°1000 kg

A 1000 kg car drives up a 6° slope at a constant 72 km/h. Air resistance and rolling resistance together amount to 450 N. Find the power P the wheels must deliver, in kW.

m = 1000 kgθ = 6°Fr = 450 Nv = 72 km/hg = 9.81 m/s²
P = kW
10.Work & energyHard
h = 4 mL = 4.5 mμ = 0.15k = 1500 N/m

A 10 kg block is released from rest at height 4 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 4.5 m long (μ = 0.15) and then runs onto a spring (k = 1500 N/m) on a smooth surface. Find the maximum compression x of the spring.

m = 10 kgh = 4 mL = 4.5 mμ = 0.15k = 1500 N/mg = 9.81 m/s²
x = cm
11.Momentum & collisionsMedium
2 kg49 m/s3 kgv′2​ = ?

A 5 kg projectile moving horizontally at 31 m/s explodes into two fragments that move along the same line. The 2 kg fragment continues forwards at 49 m/s. Find the velocity v′2 of the 3 kg fragment (positive in the original direction).

M = 5 kgu = 31 m/sm1 = 2 kgv′1 = 49 m/sm2 = 3 kg
v′2 = m/s
12.Momentum & collisionsHard
30 m/s17 m/s

A 0.4 kg ball hits a wall at 30 m/s and bounces straight back at 17 m/s. The contact lasts 5 ms. Find the average force Favg of the wall on the ball.

m = 0.4 kgvin = 30 m/svout = 17 m/sΔt = 5 ms
Favg = N
13.Rigid-body rotationMedium
1.5 kgaαM = 5.5 kgR = 0.3 m

A 1.5 kg block hangs from a light cord wrapped around a pulley, a uniform solid disc of mass 5.5 kg and radius 0.3 m that turns on a frictionless horizontal axle. The block is released from rest. Use g = 9.81 m/s². Find the acceleration a of the block.

m = 1.5 kgM = 5.5 kgR = 0.3 mg = 9.81 m/s²
a = m/s²
14.Rigid-body rotationHard
3 m/sω

A solid cylinder of mass 20 kg rolls without slipping at 3 m/s. What percentage p of its total kinetic energy is rotational?

m = 20 kgv = 3 m/sI = ½·m·r²
p = %
15.Gears & gear trainsMedium
d1​ = 125 mmd2​ = 400 mm1500 rpmn2​ = ?

A 125 mm pulley at 1500 rpm drives a 400 mm pulley by a belt with 2 % slip. Find the speed n2 of the driven pulley.

n1 = 1500 rpmd1 = 125 mmd2 = 400 mms = 2 %
n2 = rpm
16.Gears & gear trainsHard
A = 18B = 40C = 45D = 60

A 2.2 kW motor at 2900 rpm drives gear A (18 teeth), which meshes with gear B (40 teeth). Gear C (45 teeth) on the same shaft as B drives gear D (60 teeth) on the output shaft. Each gear mesh has an efficiency of 97%. Find the output torque Tout.

P = 2.2 kWnin = 2900 rpmA = 18B = 40C = 45D = 60ηmesh = 97%
Tout = N·m
17.Springs & pendulumsMedium
t (s)x (cm)0.4 s

A 2.8 kg mass on a spring with k = 190 N/m is pulled 11 cm in the positive direction and released from rest at t = 0. Find its displacement x from equilibrium at t = 0.4 s (with sign).

m = 2.8 kgk = 190 N/mA = 11 cmt = 0.4 s
x = cm
18.Springs & pendulumsHard
t (s)x (cm)t = ?3.2

A body oscillates in simple harmonic motion with period 3.6 s and amplitude 8 cm. What is the shortest time t it needs to move from equilibrium to a displacement of 3.2 cm?

T = 3.6 sA = 8 cmx = 3.2 cm
t = s
19.Mechanical vibrationsMedium
tx12 mm4 cycles1.6 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 12 mm is followed 4 cycles later by a peak of 1.6 mm. Find the damping ratio ζ.

x0 = 12 mmx4 = 1.6 mmn = 4
ζ =
20.Mechanical vibrationsHard
k1​ = 20k2​ = 40k3​ = 100m = 10 kg

A 10 kg mass hangs from spring k₃ = 100 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 20 kN/m and k₂ = 40 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 10 kgk1 = 20 kN/mk2 = 40 kN/mk3 = 100 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: t = 2 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 54/3.6 = 15 m/s

Braking time

0 = v₀ − a·t → t = v₀/a = 15/7.5 = 2 s

Answer

t = 2 s
2.Kinematics

Answer: hmax = 45.1 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Rise above the roof

0 = v₀² − 2·g·Δh → Δh = 10²/(2·9.81) = 5.097 m

Height above the ground

hmax = 40 + 5.097 = 45.1 m

Answer

hmax = 45.1 m
3.Newton’s laws

Answer: a = 5.549 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 45° − 0.2·cos 45°) = 9.81·(0.7071 − 0.1414) = 5.549 m/s²

Answer

a = 5.549 m/s²
4.Newton’s laws

Answer: T = 50.6 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the string

m₂·g = 58.86 N
m₁·g·sin θ = 37.83 N
μ·m₁·g·cos θ = 4.509 N

Acceleration of the system

a = (58.86 − 37.83 − 4.509)/12 = 1.376 m/s²

Tension from the hanging mass

m2·g − T = m2·a → T = 6·(9.81 − 1.376) = 50.6 N

Answer

T = 50.6 N
5.Projectile motion

Answer: y = 16.79 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Time to the wall

vx = 28·cos 45° = 19.8 m/s
t = x/vx = 24/19.8 = 1.212 s

Height at that time

y = 19.8·1.212 − ½·9.81·1.212² = 16.79 m

Answer

y = 16.79 m

The ball is still rising at the wall.

6.Projectile motion

Answer: H = 54.46 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Vertical launch speed

vy = 34·sin 45° = 24.04 m/s

Rise above the cliff

Δh = vy²/(2g) = 24.04²/(2·9.81) = 29.46 m

Height above the ground

H = 25 + 29.46 = 54.46 m

Answer

H = 54.46 m
7.Circular motion

Answer: T = 1.923 s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Radius of the circle

r = L·sin θ = 1.3·sin 45° = 0.9192 m

Speed

Tension and gravity together give the inward force: tan θ = v²/(r·g).

v = √(r·g·tan θ) = √(0.9192·9.81·tan 45°) = 3.003 m/s

Period

T = 2π·r/v = 2π·0.9192/3.003 = 1.923 s

Answer

T = 1.923 s
8.Circular motion

Answer: vmin = 3.836 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Tension zero at the top

m·g = m·v²/r → v = √(g·r) = √(9.81·1.5) = 3.836 m/s

Answer

vmin = 3.836 m/s
9.Work & energy

Answer: P = 29.51 kW

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). Power is force times speed: P = F·v.

Driving force

m·g = 1000·9.81 = 9810 N
mg·sin θ = 9810·sin 6° = 1025 N
F = 1025 + 450 = 1475 N

Power

v = 72/3.6 = 20 m/s
P = F·v = 1475·20 = 29508 W = 29.51 kW

Answer

P = 29.51 kW
10.Work & energy

Answer: x = 65.95 cm

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 98.1·(4 − 0.15·4.5) = 326.2 J

Maximum compression

½kx² = 326.2 → x = √(2·326.2/1500) = 0.6595 m = 65.95 cm

Answer

x = 65.95 cm
11.Momentum & collisions

Answer: v′2 = 19 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum before

p = M·u = 5·31 = 155 kg·m/s

Momentum after

155 = 2·49 + 3·v′2
v′2 = (155 − 98)/3 = 19 m/s

Answer

v′2 = 19 m/s
12.Momentum & collisions

Answer: Favg = 3760 N

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.4·(17 + 30) = 18.8 N·s

Average force

Favg = J/Δt = 18.8/0.005 = 3760 N

Answer

Favg = 3760 N
13.Rigid-body rotation

Answer: a = 3.462 m/s²

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Block and pulley

block: m·g − T = m·a
pulley: T·R = I·α = ½·M·R²·(a/R) → T = ½·M·a

Acceleration

a = m·g/(m + M/2) = 1.5·9.81/(1.5 + 2.75) = 3.462 m/s²

Answer

a = 3.462 m/s²
14.Rigid-body rotation

Answer: p = 33.33 %

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Translational and rotational parts

Etrans = ½·m·v² = ½·20·3² = 90 J
Erot = ½·I·ω² = ½·0.5·m·r²·(v/r)² = 0.5·90 = 45 J

Rotational share

p = 45/135·100% = c/(1 + c)·100% = 33.33%

Answer

p = 33.33 %

The share depends only on the shape, not on the mass or the speed.

15.Gears & gear trains

Answer: n2 = 459.4 rpm

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Speed without slip

1500·125/400 = 468.8 rpm

With slip

n2 = 468.8·0.98 = 459.4 rpm

Answer

n2 = 459.4 rpm
16.Gears & gear trains

Answer: Tout = 20.2 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Output speed

nout = 2900·(18/40)·(45/60) = 978.8 rpm
ωout = 2π·978.8/60 = 102.5 rad/s

Output power and torque

Pout = 2200·0.97² = 2070 W
Tout = Pout/ωout = 2070/102.5 = 20.2 N·m

Answer

Tout = 20.2 N·m
17.Springs & pendulums

Answer: x = −10.87 cm

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(190/2.8) = 8.238 rad/s
ω·t = 8.238·0.4 = 3.295 rad

Displacement

x = A·cos(ω·t) = 11·cos(3.295) = −10.87 cm

Answer

x = −10.87 cm
18.Springs & pendulums

Answer: t = 0.2358 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = 2π/T = 2π/3.6 = 1.745 rad/s

Solve for the time

0.4 = sin(ω·t) → ω·t = arcsin(0.4) = 0.4115 rad
t = 0.4115/1.745 = 0.2358 s

Answer

t = 0.2358 s
19.Mechanical vibrations

Answer: ζ = 0.07991

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/4)·ln(12/1.6) = 0.5037

Damping ratio

ζ = δ/√(4π² + δ²) = 0.5037/√(39.48 + 0.2537) = 0.07991

Answer

ζ = 0.07991
20.Mechanical vibrations

Answer: fn = 9.746 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 20 + 40 = 60 kN/m
keq = 60·100/(60 + 100) = 37.5 kN/m

Natural frequency

ωn = √(37500/10) = 61.24 rad/s
fn = 61.24/(2π) = 9.746 Hz

Answer

fn = 9.746 Hz

ExamProblems · examproblems.com/courses/dynamics