In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Kinematics
Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h
Method
List what you know: v₀, v, a, t and s, with units.
Pick the equation that contains your three knowns and the unknown.
Choose one positive direction and give opposing quantities a minus sign.
Solve and check that the answer is physically sensible.
Newton’s laws
Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ
Method
Draw a free-body diagram with every force on the body.
Choose a positive direction along the motion.
Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
Apply ΣF = m·a along the motion; friction is μ·N against the motion.
Projectile motion
Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g
Method
Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
The horizontal motion has constant speed; the vertical motion has acceleration −g.
Find the time of flight from the vertical motion.
Use that time in the horizontal motion to find the range.
Circular motion
Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)
Work & energy
Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t
Momentum & collisions
Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv
Method
Choose a positive direction and give each velocity its sign.
Write the total momentum before: Σm·v.
For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
Set momentum before equal to momentum after and solve.
Rigid-body rotation
Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω
Method
Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.
Gears & gear trains
Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios
Springs & pendulums
Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²
Mechanical vibrations
Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2
2Practice problems
1.KinematicsMedium
A plane needs a speed of 280 km/h to take off and the usable runway is 1500 m long. Starting from rest, what constant acceleration a does it need?
v₀ = 0v = 280 km/hs = 1500 m
a = m/s²
2.KinematicsHard
A ball is thrown straight up at 17 m/s from the edge of a roof 20 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.
v₀ = 17 m/sh₀ = 20 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
An 8 kg block slides down a slope at 45° to the horizontal. The coefficient of kinetic friction is 0.25. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.
m = 8 kgθ = 45°μ = 0.25g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
A 7 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 5 kg mass. The coefficient of kinetic friction between block and table is 0.2. Use g = 9.81 m/s². Find the acceleration a of the system.
m1 = 7 kgm2 = 5 kgμ = 0.2g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
A ball is launched from level ground at 70° above the horizontal and lands 20 m away. Ignore air resistance and use g = 9.81 m/s². Find the launch speed v0.
θ = 70°R = 20 mg = 9.81 m/s²
v0 = m/s
6.Projectile motionHard
A ball is launched at 25° above horizontal from the top of a 60 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.
v0 = 18 m/sθ = 25°h = 60 mg = 9.81 m/s²
x = m
7.Circular motionMedium
In a fairground rotor, riders stand against the wall of a vertical cylinder of radius 2 m. When it spins fast enough the floor drops away and friction holds them up. The coefficient of static friction is 0.4. Use g = 9.81 m/s². Find the smallest rotation rate n in revolutions per minute.
r = 2 mμs = 0.4g = 9.81 m/s²
n = rpm
8.Circular motionHard
A 1.7 kg ball on a string 1 m long is swung in a vertical circle. At the lowest point it moves at 8.5 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.
m = 1.7 kgr = 1 mv = 8.5 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
A block slides from rest down a slope at 15° to the horizontal. The coefficient of kinetic friction is 0.15. Find its speed v after it has slid 14 m along the slope.
θ = 15°μ = 0.15d = 14 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
A spring of stiffness 5000 N/m at the bottom of a 20° slope is compressed by 8 cm against a 0.5 kg block and released. The coefficient of kinetic friction between block and slope is 0.25. How far d up the slope does the block travel from the release point before it stops? (Ignore the short distance over which the spring pushes, i.e. take friction and gravity over the whole distance d.)
A 5 kg glider moving at 2 m/s makes a perfectly elastic head-on collision with a 4 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).
m1 = 5 kgm2 = 4 kgv1 = 2 m/sv2 = 0
v′1 = m/s
12.Momentum & collisionsHard
A 0.25 kg ball hits a wall at 27 m/s and bounces straight back at 11 m/s. The contact lasts 40 ms. Find the average force Favg of the wall on the ball.
m = 0.25 kgvin = 27 m/svout = 11 m/sΔt = 40 ms
Favg = N
13.Rigid-body rotationMedium
A flywheel with a moment of inertia of 13.5 kg·m² spins at 3000 rpm. A brake applies a constant friction torque of 110 N·m. How many revolutions N does the flywheel make before it stops?
I = 13.5 kg·m²n = 3000 rpmTb = 110 N·m
N = rev
14.Rigid-body rotationHard
A uniform slender rod of mass 10 kg and length 0.8 m hangs at rest from a frictionless pivot at its top end. A 30 g bullet moving horizontally at 340 m/s hits the rod 0.47 m below the pivot and stays embedded. Find the angular velocity ω of the rod just after the impact.
M = 10 kgL = 0.8 mm = 30 gv = 340 m/sd = 0.47 m
ω = rad/s
15.Gears & gear trainsMedium
A belt runs on a 100 mm driving pulley at 1500 rpm. The tension is 1000 N on the tight side and 500 N on the slack side. Find the power P transmitted, in kW.
d1 = 100 mmn1 = 1500 rpmT1 = 1000 NT2 = 500 N
P = kW
16.Gears & gear trainsHard
An open belt connects a 100 mm pulley and a 200 mm pulley whose centres are 1000 mm apart. Find the angle of wrap θ on the smaller pulley, in degrees.
d1 = 100 mmd2 = 200 mmC = 1000 mm
θ = °
17.Springs & pendulumsMedium
An astronaut on another planet finds that a simple pendulum 1.8 m long has a period of 2.52 s for small swings. Find the gravitational acceleration g on that planet.
L = 1.8 mT = 2.52 s
g = m/s²
18.Springs & pendulumsHard
A mass on a spring with k = 100 N/m oscillates on a frictionless surface with an amplitude of 18 cm. Find the energy U stored in the spring when the mass is 13 cm from equilibrium.
k = 100 N/mA = 18 cmx = 13 cm
U = J
19.Mechanical vibrationsMedium
A 5 kg mass on a spring with a stiffness of 15 kN/m has a viscous damper giving a damping ratio of 0.3. Find the damped natural frequency fd of its free vibration in Hz.
m = 5 kgk = 15 kN/mζ = 0.3
fd = Hz
20.Mechanical vibrationsHard
A 20 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 100 kN/m and k₂ = 50 kN/m. The mass stays level. Find the equivalent stiffness keq of the spring system in kN/m.
m = 20 kgk1 = 100 kN/mk2 = 50 kN/m
keq = kN/m
3Solutions
1.Kinematics
Answer: a = 2.016 m/s²
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v = 280/3.6 = 77.78 m/s
Acceleration
a = v²/(2s) = 77.78²/(2·1500) = 2.016 m/s²
Answer
a = 2.016 m/s²
2.Kinematics
Answer: t = 4.394 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equation of motion
Up is positive and the ground is h₀ below the starting point.
−20 = 17·t − ½·9.81·t²
4.905·t² − 17·t − 20 = 0
Solve the quadratic
Only the positive root is physical.
t = (17 + √(17² + 2·9.81·20))/9.81 = 4.394 s
Answer
t = 4.394 s
3.Newton’s laws
Answer: a = 5.203 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Solve the range formula for v₀
v₀ = √(g·R/sin 2θ) = √(9.81·20/sin 140°) = 17.47 m/s
Answer
v0 = 17.47 m/s
6.Projectile motion
Answer: x = 71.09 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 18·cos 25° = 16.31 m/s
vy = v0·sin θ = 18·sin 25° = 7.607 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 60 + 7.607·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (7.607 + √(57.87 + 1177))/9.81 = 4.358 s
Horizontal distance
x = vx·t = 16.31·4.358 = 71.09 m
Answer
x = 71.09 m
7.Circular motion
Answer: n = 33.44 rpm
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Forces on a rider
N = m·ω²·r
μ·N = m·g → μ·ω²·r = g
Angular speed
ω = √(g/(μ·r)) = √(9.81/(0.4·2)) = 3.502 rad/s
Rotation rate
n = ω·60/(2π) = 33.44 rpm
Answer
n = 33.44 rpm
8.Circular motion
Answer: T = 139.5 N
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Forces at the lowest point
Towards the centre (up) is positive.
T − m·g = m·v²/r
T = 1.7·9.81 + 1.7·8.5²/1 = 16.68 + 122.8 = 139.5 N
Answer
T = 139.5 N
9.Work & energy
Answer: v = 5.594 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy balance along the slope
The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.
½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·14·(0.2588 − 0.15·0.9659)) = 5.594 m/s
Answer
v = 5.594 m/s
10.Work & energy
Answer: d = 5.654 m
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Spring energy
x = 8 cm = 0.08 m
½kx² = ½·5000·0.08² = 16 J
Energy balance along the slope
m·g = 0.5·9.81 = 4.905 N
½kx² = mg·d·(sin θ + μ·cos θ)
d = 16/(4.905·(0.342 + 0.25·0.9397)) = 5.654 m
Answer
d = 5.654 m
11.Momentum & collisions
Answer: v′1 = 0.2222 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Elastic collision with a target at rest
Solving momentum and energy conservation together gives these two results.
v′1 = (5 − 4)/(5 + 4)·2 = 0.2222 m/s
v′2 = 2·5/(5 + 4)·2 = 2.222 m/s
Answer
v′1 = 0.2222 m/s
12.Momentum & collisions
Answer: Favg = 237.5 N
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Change in momentum
J = m·Δv = 0.25·(11 + 27) = 9.5 N·s
Average force
Favg = J/Δt = 9.5/0.04 = 237.5 N
Answer
Favg = 237.5 N
13.Rigid-body rotation
Answer: N = 963.9 rev
Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.
Angular velocity
ω = 2π·3000/60 = 314.2 rad/s
Work of the brake equals the kinetic energy
½·I·ω² = ½·13.5·314.2² = 666198 J
θ = 666198/110 = 6056 rad
Revolutions
N = θ/2π = 963.9 rev
Answer
N = 963.9 rev
14.Rigid-body rotation
Answer: ω = 2.24 rad/s
Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.
The pivot force passes through the pivot, so it has no moment there during the impact.
m·v·d = I·ω → ω = 0.03·340·0.47/2.14 = 2.24 rad/s
Answer
ω = 2.24 rad/s
15.Gears & gear trains
Answer: P = 3.927 kW
Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.
Belt speed
v = 7.854 m/s
Power
P = (1000 − 500)·7.854 = 3927 W = 3.927 kW
Answer
P = 3.927 kW
16.Gears & gear trains
Answer: θ = 174.3 °
Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.
Belt angle
asin(0.05) = 2.866°
Angle of wrap
θ = 180 − 2·2.866 = 174.3°
Answer
θ = 174.3°
17.Springs & pendulums
Answer: g = 11.19 m/s²
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Solve for g
g = 4π²·L/T² = 4π²·1.8/2.52² = 11.19 m/s²
Answer
g = 11.19 m/s²
18.Springs & pendulums
Answer: U = 0.845 J
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Total energy
E = ½·k·A² = ½·100·0.18² = 1.62 J
Spring energy at x
U = ½·k·x² = ½·100·0.13² = 0.845 J
Answer
U = 0.845 J
19.Mechanical vibrations
Answer: fd = 8.316 Hz
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Undamped natural frequency
ωn = √(15000/5) = 54.77 rad/s
fn = 54.77/(2π) = 8.717 Hz
Damped natural frequency
fd = fn·√(1 − ζ²) = 8.717·√(1 − 0.3²) = 8.316 Hz
Answer
fd = 8.316 Hz
20.Mechanical vibrations
Answer: keq = 150 kN/m
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Equivalent stiffness
Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.