Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
a = ?s = 1400 m

A plane needs a speed of 280 km/h to take off and the usable runway is 1400 m long. Starting from rest, what constant acceleration a does it need?

v₀ = 0v = 280 km/hs = 1400 m
a = m/s²
2.KinematicsHard
a = 22 m/s²

A model rocket is launched straight up from rest. Its engine gives it a constant upward acceleration of 22 m/s² for 1 s, after which the engine stops and the rocket moves freely. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax the rocket reaches.

a = 22 m/s²t1 = 1 sg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
θ = 45°a = ?m = 5 kg

A 5 kg block slides down a slope at 45° to the horizontal. The coefficient of kinetic friction is 0.1. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 5 kgθ = 45°μ = 0.1g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 1 kg1.5 kgμ = 0.1

A 1 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 1.5 kg mass. The coefficient of kinetic friction between block and table is 0.1. Use g = 9.81 m/s². Find the acceleration a of the system.

m1 = 1 kgm2 = 1.5 kgμ = 0.1g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
v0​ = 28 m/sθ = ?R = 75 m

A ball is launched from level ground at 28 m/s and must land 75 m away. Ignore air resistance and use g = 9.81 m/s². Find the smaller of the two possible launch angles θ.

v₀ = 28 m/sR = 75 mg = 9.81 m/s²
θ = °
6.Projectile motionHard
h = 30 mv0​ = 14 m/s60°x = ?

A ball is launched at 60° above horizontal from the top of a 30 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 14 m/sθ = 60°h = 30 mg = 9.81 m/s²
x = m
7.Circular motionMedium
r = 140 mvmax​ = ?

A car takes a flat curve of radius 140 m. The coefficient of static friction between tyres and road is 0.5. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 140 mμs = 0.5g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
R = 8 mh = ?

A small cart is released from rest on a frictionless track and runs into a vertical loop of radius 8 m. From what minimum height hmin above the bottom of the loop must it start to stay on the track at the top of the loop?

R = 8 mv₀ = 0
hmin = m
9.Work & energyMedium
45°d = 2 mμ = 0.15

A block slides from rest down a slope at 45° to the horizontal. The coefficient of kinetic friction is 0.15. Find its speed v after it has slid 2 m along the slope.

θ = 45°μ = 0.15d = 2 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
h = 16 mR = 5 mN = ?

A 2 kg cart is released from rest at a height of 16 m on a smooth track that leads into a vertical circular loop of radius 5 m. Find the normal force N the track exerts on the cart at the top of the loop.

m = 2 kgh = 16 mR = 5 mg = 9.81 m/s²
N = N
11.Momentum & collisionsMedium
5 kg2 m/s4.5 kg

A 5 kg glider moving at 2 m/s makes a perfectly elastic head-on collision with a 4.5 kg glider at rest on a frictionless track. Find the velocity v′2 of the second glider after the collision.

m1 = 5 kgm2 = 4.5 kgv1 = 2 m/sv2 = 0
v′2 = m/s
12.Momentum & collisionsHard
1.5 kgv = ?15 g15°L = 1 m

A 15 g bullet is fired horizontally into a 1.5 kg block hanging from light strings 1 m long, and stays in it. The strings swing out to a largest angle of 15° from the vertical. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 15 gM = 1.5 kgL = 1 mθ = 15°g = 9.81 m/s²
v = m/s
13.Rigid-body rotationMedium
ω = ?L = 2 mm = 3.5 kg

A uniform slender rod of mass 3.5 kg and length 2 m is pinned at one end and released from rest in a horizontal position. Ignore friction and use g = 9.81 m/s². Find the angular velocity ω of the rod as it swings through the vertical position.

m = 3.5 kgL = 2 mg = 9.81 m/s²
ω = rad/s
14.Rigid-body rotationHard
θ = 40°vs = 9.5 m

A hollow sphere starts from rest and rolls without slipping down a slope inclined at 40° to the horizontal. Use g = 9.81 m/s². Its radius is 0.15 m. Find its angular velocity ω after it has rolled 9.5 m along the slope.

θ = 40°s = 9.5 mI = (2/3)·m·r²g = 9.81 m/s²r = 0.15 m
ω = rad/s
15.Gears & gear trainsMedium
N1​ = 16, m = 2 mm

A 3 kW motor running at 2900 rpm drives a pinion with 16 teeth and a module of 2 mm. Find the tangential force Ft on the pinion teeth.

P = 3 kWn = 2900 rpmN1 = 16m = 2 mm
Ft = N
16.Gears & gear trainsHard
A = 12B = 80C = 24D = 25

In a compound gear train, gear A (12 teeth) on the input shaft turning at 960 rpm drives gear B (80 teeth). Gear C (24 teeth) is fixed to the same shaft as B and drives gear D (25 teeth) on the output shaft. Find the output speed nout.

nin = 960 rpmA = 12B = 80C = 24D = 25
nout = rpm
17.Springs & pendulumsMedium
t (s)x (cm)0.7 s

A 0.9 kg mass on a spring with k = 270 N/m is pulled 7 cm in the positive direction and released from rest at t = 0. Find its displacement x from equilibrium at t = 0.7 s (with sign).

m = 0.9 kgk = 270 N/mA = 7 cmt = 0.7 s
x = cm
18.Springs & pendulumsHard
t (s)x (cm)t = ?6.3

A body oscillates in simple harmonic motion with period 3.4 s and amplitude 7 cm. What is the shortest time t it needs to move from its maximum displacement of 7 cm to a displacement of 6.3 cm?

T = 3.4 sA = 7 cmx = 6.3 cm
t = s
19.Mechanical vibrationsMedium
k = 150 kN/mc = 1100 N·s/mm = 50 kg

A 50 kg mass is supported by a spring with a stiffness of 150 kN/m and a viscous damper with a damping coefficient of 1100 N·s/m. Find the damping ratio ζ.

m = 50 kgk = 150 kN/mc = 1100 N·s/m
ζ =
20.Mechanical vibrationsHard
k1​ = 12k2​ = 100k3​ = 10m = 10 kg

A 10 kg mass hangs from spring k₃ = 10 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 12 kN/m and k₂ = 100 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 10 kgk1 = 12 kN/mk2 = 100 kN/mk3 = 10 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: a = 2.16 m/s²

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v = 280/3.6 = 77.78 m/s

Acceleration

a = v²/(2s) = 77.78²/(2·1400) = 2.16 m/s²

Answer

a = 2.16 m/s²
2.Kinematics

Answer: hmax = 35.67 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Powered phase

v₁ = 22·1 = 22 m/s
h₁ = ½·22·1² = 11 m

Free flight up

At the top the velocity is zero.

Δh = v₁²/(2g) = 22²/(2·9.81) = 24.67 m
hmax = 11 + 24.67 = 35.67 m

Answer

hmax = 35.67 m
3.Newton’s laws

Answer: a = 6.243 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 45° − 0.1·cos 45°) = 9.81·(0.7071 − 0.07071) = 6.243 m/s²

Answer

a = 6.243 m/s²
4.Newton’s laws

Answer: a = 5.494 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (14.71 − 0.981)/2.5 = 5.494 m/s²

Answer

a = 5.494 m/s²
5.Projectile motion

Answer: θ = 34.9 °

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Range formula

R = v₀²·sin 2θ/g → sin 2θ = 9.81·75/28² = 0.9385

Angle

2θ = 69.79° → θ = 34.9°

Answer

θ = 34.9°

The other solution is 90° − θ = 55.1°.

6.Projectile motion

Answer: x = 28 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 14·cos 60° = 7 m/s
vy = v0·sin θ = 14·sin 60° = 12.12 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 30 + 12.12·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (12.12 + √(147 + 588.6))/9.81 = 4.001 s

Horizontal distance

x = vx·t = 7·4.001 = 28 m

Answer

x = 28 m
7.Circular motion

Answer: vmax = 26.2 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.5·9.81·140) = 26.2 m/s

Answer

vmax = 26.2 m/s (94.34 km/h)
8.Circular motion

Answer: hmin = 20 m

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Condition at the top

m·g = m·v²/R → v² = g·R

Energy conservation

g·h = g·2R + ½·g·R → h = 2.5·R = 2.5·8 = 20 m

Answer

hmin = 20 m
9.Work & energy

Answer: v = 4.856 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy balance along the slope

The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.

½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·2·(0.7071 − 0.15·0.7071)) = 4.856 m/s

Answer

v = 4.856 m/s
10.Work & energy

Answer: N = 27.47 N

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.

Speed at the top

v² = 2g(h − 2R) = 2·9.81·(16 − 10) = 117.7 m²/s²

Forces at the top

m·g = 2·9.81 = 19.62 N
N = mv²/R − mg = 2·117.7/5 − 19.62 = 27.47 N

Answer

N = 27.47 N

The cart just makes it round when h = 2.5R; then N = 0 at the top.

11.Momentum & collisions

Answer: v′2 = 2.105 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (5 − 4.5)/(5 + 4.5)·2 = 0.1053 m/s
v′2 = 2·5/(5 + 4.5)·2 = 2.105 m/s

Answer

v′2 = 2.105 m/s
12.Momentum & collisions

Answer: v = 82.58 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Rise of the block

h = L·(1 − cos θ) = 1·(1 − cos 15°) = 0.03407 m

Speed after impact

V = √(2·9.81·0.03407) = 0.8176 m/s

Collision

v = (m + M)·V/m = 1.515·0.8176/0.015 = 82.58 m/s

Answer

v = 82.58 m/s
13.Rigid-body rotation

Answer: ω = 3.836 rad/s

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Loss of potential energy

m·g·L/2 = 3.5·9.81·1 = 34.34 J

Moment of inertia about the pin

IO = m·L²/3 = 3.5·2²/3 = 4.667 kg·m²

Energy balance

½·IO·ω² = 34.34 → ω = √(2·34.34/4.667) = 3.836 rad/s

Answer

ω = 3.836 rad/s
14.Rigid-body rotation

Answer: ω = 56.52 rad/s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Height dropped

h = s·sin θ = 9.5·sin 40° = 6.106 m

Energy balance with rolling

Rolling without slipping: ω = v/r, and friction does no work at the contact point.

m·g·h = ½·m·v²·(1 + 0.6667)
v = √(2·9.81·6.106/1.667) = 8.479 m/s
ω = v/r = 8.479/0.15 = 56.52 rad/s

Answer

ω = 56.52 rad/s
15.Gears & gear trains

Answer: Ft = 617.4 N

Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.

Torque on the pinion

ω = 2π·2900/60 = 303.7 rad/s
T = P/ω = 3000/303.7 = 9.879 N·m

Pitch diameter

d = m·N = 2·16 = 32 mm

Tangential force

Ft = 2T/d = 2·9.879/0.032 = 617.4 N

Answer

Ft = 617.4 N
16.Gears & gear trains

Answer: nout = 138.2 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

First stage

nB = 960·12/80 = 144 rpm = nC

Second stage

nout = 144·24/25 = 138.2 rpm

Answer

nout = 138.2 rpm

total ratio = 6.944 : 1

17.Springs & pendulums

Answer: x = 6.327 cm

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(270/0.9) = 17.32 rad/s
ω·t = 17.32·0.7 = 12.12 rad

Displacement

x = A·cos(ω·t) = 7·cos(12.12) = 6.327 cm

Answer

x = 6.327 cm
18.Springs & pendulums

Answer: t = 0.2441 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = 2π/T = 2π/3.4 = 1.848 rad/s

Solve for the time

0.9 = cos(ω·t) → ω·t = arccos(0.9) = 0.451 rad
t = 0.451/1.848 = 0.2441 s

Answer

t = 0.2441 s
19.Mechanical vibrations

Answer: ζ = 0.2008

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(150000·50) = 5477 N·s/m

Damping ratio

ζ = c/cc = 1100/5477 = 0.2008

Answer

ζ = 0.2008

ζ < 1, so the system is underdamped and oscillates as it decays.

20.Mechanical vibrations

Answer: fn = 4.822 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 12 + 100 = 112 kN/m
keq = 112·10/(112 + 10) = 9.18 kN/m

Natural frequency

ωn = √(9180/10) = 30.3 rad/s
fn = 30.3/(2π) = 4.822 Hz

Answer

fn = 4.822 Hz

ExamProblems · examproblems.com/courses/dynamics