Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)4.167 s12.5

A car driving at 45 km/h brakes with a constant deceleration of 3 m/s² until it stops. Find the braking distance s.

v₀ = 45 km/ha = −3 m/s²v = 0
s = m
2.KinematicsHard
v₀ = 16 m/s15 m

A ball is thrown straight up at 16 m/s from the edge of a roof 15 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 16 m/sh₀ = 15 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
10 kg15°F = 60 Nμ = 0.2

A 10 kg sled is pulled across level snow by a rope at 15° above the horizontal with a force of 60 N. The coefficient of kinetic friction is 0.2. Use g = 9.81 m/s². Find the acceleration a of the sled.

m = 10 kgF = 60 Nθ = 15°μ = 0.2g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 5 kg10 kgθ = 20°

A 5 kg block on a ramp at 20° is connected by a light string over a frictionless pulley at the top of the ramp to a hanging 10 kg mass. The hanging mass moves down. The ramp is frictionless. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 5 kgm2 = 10 kgθ = 20°μ = 0g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = 22 m/s40°x = ?

A ball is launched at 40° above horizontal from level ground. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 22 m/sθ = 40°g = 9.81 m/s²
x = m
6.Projectile motionHard
9 mv0​ = 35 m/s45°x = ?

A ball is thrown from ground level at 35 m/s and 45° above the horizontal. It lands on the flat roof of a building 9 m high, on its way down. Ignore air resistance and use g = 9.81 m/s². Find the horizontal distance x from the launch point to where it lands.

v₀ = 35 m/sθ = 45°hroof = 9 mg = 9.81 m/s²
x = m
7.Circular motionMedium
r = 145 mvmax​ = ?

A car takes a flat curve of radius 145 m. The coefficient of static friction between tyres and road is 0.6. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 145 mμs = 0.6g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
θ = 8°to centrevmax​ = ?

A curve of radius 220 m is banked at 8°, and the coefficient of static friction between tyres and road is 0.4. Use g = 9.81 m/s². Find the highest speed vmax at which a car can take the curve without sliding up and out.

r = 220 mθ = 8°μs = 0.4g = 9.81 m/s²
vmax = m/s
9.Work & energyMedium
36 km/h2°1200 kg

A 1200 kg car drives up a 2° slope at a constant 36 km/h. Air resistance and rolling resistance together amount to 200 N. Find the power P the wheels must deliver, in kW.

m = 1200 kgθ = 2°Fr = 200 Nv = 36 km/hg = 9.81 m/s²
P = kW
10.Work & energyHard
10 kg4 kgμ = 0.2d = 2.5 m

A 10 kg block rests on a rough horizontal table (μ = 0.2). A light string runs from it over a smooth pulley at the edge of the table to a hanging 4 kg block. The system is released from rest. Find the speed v of the blocks after the hanging block has dropped 2.5 m.

m1 = 10 kgm2 = 4 kgμ = 0.2d = 2.5 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
3 kg9 m/s1.5 kg

A 3 kg glider moving at 9 m/s makes a perfectly elastic head-on collision with a 1.5 kg glider at rest on a frictionless track. Find the velocity v′2 of the second glider after the collision.

m1 = 3 kgm2 = 1.5 kgv1 = 9 m/sv2 = 0
v′2 = m/s
12.Momentum & collisionsHard
1600 kg25 m/s1800 kg18 m/sv′ = ?

At a crossing a 1600 kg car travelling east at 25 m/s collides with a 1800 kg car travelling north at 18 m/s. The cars lock together. Find the speed v′ of the wreck just after the collision.

m1 = 1600 kgv1 = 25 m/s (E)m2 = 1800 kgv2 = 18 m/s (N)
v′ = m/s
13.Rigid-body rotationMedium
ω = ?L = 1.1 mm = 7.5 kg

A uniform slender rod of mass 7.5 kg and length 1.1 m is pinned at one end and released from rest in a horizontal position. Ignore friction and use g = 9.81 m/s². Find the angular velocity ω of the rod as it swings through the vertical position.

m = 7.5 kgL = 1.1 mg = 9.81 m/s²
ω = rad/s
14.Rigid-body rotationHard
θ = 30°vs = 10 m

A solid cylinder starts from rest and rolls without slipping down a slope inclined at 30° to the horizontal. Use g = 9.81 m/s². Find its speed v after it has rolled 10 m along the slope.

θ = 30°s = 10 mI = ½·m·r²g = 9.81 m/s²
v = m/s
15.Gears & gear trainsMedium
Tw​ = ?z = 3, 1450 rpm

A 0.37 kW motor at 1450 rpm drives a worm with 3 start(s). The worm wheel has 60 teeth and the drive has an efficiency of 55%. Find the output torque Tw on the wheel shaft.

z = 3Nw = 60n = 1450 rpmP = 0.37 kWη = 55%
Tw = N·m
16.Gears & gear trainsHard
A = 15B = 20C = 12D = ?

In a compound gear train, gear A (15 teeth) on the input shaft turns at 1440 rpm and drives gear B (20 teeth). Gear C (12 teeth) is fixed to the same shaft as B and drives gear D on the output shaft. The output must turn at 180 rpm. How many teeth ND must gear D have?

nin = 1440 rpmA = 15B = 20C = 12nout = 180 rpm
ND =
17.Springs & pendulumsMedium
t (s)x (cm)1.45 s

A 4 kg mass on a spring with k = 220 N/m is pulled 12 cm in the positive direction and released from rest at t = 0. Find its displacement x from equilibrium at t = 1.45 s (with sign).

m = 4 kgk = 220 N/mA = 12 cmt = 1.45 s
x = cm
18.Springs & pendulumsHard
1.5 kgk = 480 N/m

A 1.5 kg mass is attached to the lower end of an unstretched vertical spring with k = 480 N/m and released from rest. Use g = 9.81 m/s². Find the greatest speed vmax of the mass.

m = 1.5 kgk = 480 N/mg = 9.81 m/s²
vmax = m/s
19.Mechanical vibrationsMedium
k = 100 kN/mζ = 0.7m = 150 kg

A 150 kg mass on a spring with a stiffness of 100 kN/m has a viscous damper giving a damping ratio of 0.7. Find the damped natural frequency fd of its free vibration in Hz.

m = 150 kgk = 100 kN/mζ = 0.7
fd = Hz
20.Mechanical vibrationsHard
k1​ = 20k2​ = 25m = 25 kg

A 25 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 20 kN/m and the lower one k₂ = 25 kN/m. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 25 kgk1 = 20 kN/mk2 = 25 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: s = 26.04 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 45/3.6 = 12.5 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 12.5²/(2·3) = 26.04 m

Answer

s = 26.04 m
2.Kinematics

Answer: t = 4.022 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−15 = 16·t − ½·9.81·t²
4.905·t² − 16·t − 15 = 0

Solve the quadratic

Only the positive root is physical.

t = (16 + √(16² + 2·9.81·15))/9.81 = 4.022 s

Answer

t = 4.022 s
3.Newton’s laws

Answer: a = 4.144 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Normal force

N = m·g − F·sin θ = 98.1 − 60·sin 15° = 82.57 N

Horizontal forces

m·a = F·cos θ − μ·N = 57.96 − 16.51
a = 41.44/10 = 4.144 m/s²

Answer

a = 4.144 m/s²
4.Newton’s laws

Answer: T = 43.88 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the string

m₂·g = 98.1 N
m₁·g·sin θ = 16.78 N
μ·m₁·g·cos θ = 0 N

Acceleration of the system

a = (98.1 − 16.78 − 0)/15 = 5.422 m/s²

Tension from the hanging mass

m2·g − T = m2·a → T = 10·(9.81 − 5.422) = 43.88 N

Answer

T = 43.88 N
5.Projectile motion

Answer: x = 48.59 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 22·cos 40° = 16.85 m/s
vy = v0·sin θ = 22·sin 40° = 14.14 m/s

Time in the air

Starting and landing at the same height: t = 2vy/g.

t = 2·14.14/9.81 = 2.883 s

Horizontal distance

x = vx·t = 16.85·2.883 = 48.59 m

Answer

x = 48.59 m
6.Projectile motion

Answer: x = 115.1 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

vx = 24.75 m/s, vy = 24.75 m/s

Time to land on the roof

Larger root: the ball is descending.

9 = 24.75·t − 4.905·t²
t = (24.75 + √(24.75² − 2·9.81·9))/9.81 = 4.651 s

Horizontal distance

x = vx·t = 24.75·4.651 = 115.1 m

Answer

x = 115.1 m
7.Circular motion

Answer: vmax = 29.21 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.6·9.81·145) = 29.21 m/s

Answer

vmax = 29.21 m/s (105.2 km/h)
8.Circular motion

Answer: vmax = 35.16 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Force balances

Friction points down the slope.

N·(sin θ + μ·cos θ) = m·v²/r
N·(cos θ − μ·sin θ) = m·g

Speed

v = √(220·9.81·0.5353/0.9346) = 35.16 m/s

Answer

vmax = 35.16 m/s
(126.6 km/h)
9.Work & energy

Answer: P = 6.108 kW

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). Power is force times speed: P = F·v.

Driving force

m·g = 1200·9.81 = 11772 N
mg·sin θ = 11772·sin 2° = 410.8 N
F = 410.8 + 200 = 610.8 N

Power

v = 36/3.6 = 10 m/s
P = F·v = 610.8·10 = 6108 W = 6.108 kW

Answer

P = 6.108 kW
10.Work & energy

Answer: v = 2.647 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy released and lost

m₂g·d = 39.24·2.5 = 98.1 J
μ·m₁g·d = 0.2·98.1·2.5 = 49.05 J

Kinetic energy of both blocks

½(m₁ + m₂)v² = 49.05 → v = √(2·49.05/14) = 2.647 m/s

Answer

v = 2.647 m/s
11.Momentum & collisions

Answer: v′2 = 12 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (3 − 1.5)/(3 + 1.5)·9 = 3 m/s
v′2 = 2·3/(3 + 1.5)·9 = 12 m/s

Answer

v′2 = 12 m/s
12.Momentum & collisions

Answer: v′ = 15.14 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum components

px = 1600·25 = 40000 kg·m/s
py = 1800·18 = 32400 kg·m/s

Speed of the wreck

v′ = √(px² + py²)/(m1 + m2) = 51476/3400 = 15.14 m/s

Answer

v′ = 15.14 m/s
13.Rigid-body rotation

Answer: ω = 5.172 rad/s

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Loss of potential energy

m·g·L/2 = 7.5·9.81·0.55 = 40.47 J

Moment of inertia about the pin

IO = m·L²/3 = 7.5·1.1²/3 = 3.025 kg·m²

Energy balance

½·IO·ω² = 40.47 → ω = √(2·40.47/3.025) = 5.172 rad/s

Answer

ω = 5.172 rad/s
14.Rigid-body rotation

Answer: v = 8.087 m/s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Height dropped

h = s·sin θ = 10·sin 30° = 5 m

Energy balance with rolling

Rolling without slipping: ω = v/r, and friction does no work at the contact point.

m·g·h = ½·m·v²·(1 + 0.5)
v = √(2·9.81·5/1.5) = 8.087 m/s

Answer

v = 8.087 m/s
15.Gears & gear trains

Answer: Tw = 26.8 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Wheel speed

nw = n·z/Nw = 1450·3/60 = 72.5 rpm

Output torque

ωw = 2π·72.5/60 = 7.592 rad/s
Tw = η·P/ωw = 0.55·370/7.592 = 26.8 N·m

Answer

Tw = 26.8 N·m
16.Gears & gear trains

Answer: ND = 72

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Intermediate shaft speed

nB = nC = 1440·15/20 = 1080 rpm

Teeth on gear D

ND = C·nC/nout = 12·1080/180 = 72

Answer

ND = 72
17.Springs & pendulums

Answer: x = −2.877 cm

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(220/4) = 7.416 rad/s
ω·t = 7.416·1.45 = 10.75 rad

Displacement

x = A·cos(ω·t) = 12·cos(10.75) = −2.877 cm

Answer

x = −2.877 cm
18.Springs & pendulums

Answer: vmax = 0.5484 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Equilibrium and amplitude

x₀ = m·g/k = 1.5·9.81/480 = 0.03066 m = A

Greatest speed

The speed is largest at equilibrium.

ω = √(480/1.5) = 17.89 rad/s
vmax = A·ω = 0.03066·17.89 = 0.5484 m/s

Answer

vmax = 0.5484 m/s
19.Mechanical vibrations

Answer: fd = 2.935 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(100000/150) = 25.82 rad/s
fn = 25.82/(2π) = 4.109 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 4.109·√(1 − 0.7²) = 2.935 Hz

Answer

fd = 2.935 Hz
20.Mechanical vibrations

Answer: fn = 3.355 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.

1/keq = 1/20 + 1/25 → keq = 20·25/(20 + 25) = 11.11 kN/m

Natural frequency

ωn = √(11111/25) = 21.08 rad/s
fn = 21.08/(2π) = 3.355 Hz

Answer

fn = 3.355 Hz

ExamProblems · examproblems.com/courses/dynamics