Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)2.083 s12.5

A car driving at 45 km/h brakes with a constant deceleration of 6 m/s² until it stops. Find the braking distance s.

v₀ = 45 km/ha = −6 m/s²v = 0
s = m
2.KinematicsHard
d = ?

A stone is dropped from rest into a well. The splash is heard 3.5 s after the stone is released. The speed of sound is 343 m/s; ignore air resistance and use g = 9.81 m/s². Find the depth d of the well.

ttotal = 3.5 svsound = 343 m/sg = 9.81 m/s²
d = m
3.Newton’s lawsMedium
θ = 25°a = ?m = 6 kg

A 6 kg block slides down a slope at 25° to the horizontal. The coefficient of kinetic friction is 0.1. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 6 kgθ = 25°μ = 0.1g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 6 kg6 kgμ = 0.3

A 6 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 6 kg mass. The coefficient of kinetic friction between block and table is 0.3. Use g = 9.81 m/s². Find the acceleration a of the system.

m1 = 6 kgm2 = 6 kgμ = 0.3g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
v0​ = 34 m/s40°range

A ball is launched at 40° above horizontal from level ground. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 34 m/sθ = 40°g = 9.81 m/s²
t = s
6.Projectile motionHard
18 mv0​ = 37 m/s50°x = ?

A ball is thrown from ground level at 37 m/s and 50° above the horizontal. It lands on the flat roof of a building 18 m high, on its way down. Ignore air resistance and use g = 9.81 m/s². Find the horizontal distance x from the launch point to where it lands.

v₀ = 37 m/sθ = 50°hroof = 18 mg = 9.81 m/s²
x = m
7.Circular motionMedium
θ = ?to centre120 km/h

A road engineer wants cars to take a curve of radius 150 m at 120 km/h without relying on friction. Use g = 9.81 m/s². Find the banking angle θ.

r = 150 mv = 120 km/hg = 9.81 m/s²
θ = °
8.Circular motionHard
r = 1.2 mv = ?

A ball on a string 1.2 m long is swung in a vertical circle. Use g = 9.81 m/s². What is the smallest speed vmin at the top for which the string just stays tight?

r = 1.2 mg = 9.81 m/s²
vmin = m/s
9.Work & energyMedium
25°d = 10 mμ = 0.25

A 10 kg block slides 10 m down a slope at 25° to the horizontal, with a coefficient of kinetic friction of 0.25. Find the work Wf done against friction.

m = 10 kgθ = 25°μ = 0.25d = 10 mg = 9.81 m/s²
Wf = J
10.Work & energyHard
h = 4.5 mL = 3.5 mμ = 0.15k = 4000 N/m

A 1 kg block is released from rest at height 4.5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 3.5 m long (μ = 0.15) and then runs onto a spring (k = 4000 N/m) on a smooth surface. Find the speed v of the block when it reaches the spring.

m = 1 kgh = 4.5 mL = 3.5 mμ = 0.15k = 4000 N/mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
4 kg11 m/s0.5 kg

A 4 kg glider moving at 11 m/s makes a perfectly elastic head-on collision with a 0.5 kg glider at rest on a frictionless track. Find the velocity v′2 of the second glider after the collision.

m1 = 4 kgm2 = 0.5 kgv1 = 11 m/sv2 = 0
v′2 = m/s
12.Momentum & collisionsHard
3 kgv = ?12 g25°L = 1 m

A 12 g bullet is fired horizontally into a 3 kg block hanging from light strings 1 m long, and stays in it. The strings swing out to a largest angle of 25° from the vertical. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 12 gM = 3 kgL = 1 mθ = 25°g = 9.81 m/s²
v = m/s
13.Rigid-body rotationMedium
v = ?2 kgL = 0.5 mm = 5 kg

A uniform slender rod of mass 5 kg and length 0.5 m is pinned at one end and released from rest in a horizontal position. A small ball of mass 2 kg is fixed to its free end. Ignore friction and use g = 9.81 m/s². Find the speed v of the free end as the rod swings through the vertical position.

m = 5 kgL = 0.5 mmball = 2 kgg = 9.81 m/s²
v = m/s
14.Rigid-body rotationHard
θ = 25°a

A solid cylinder rolls without slipping down a slope inclined at 25° to the horizontal. Use g = 9.81 m/s². Find the smallest coefficient of static friction μs that prevents it from slipping.

θ = 25°I = ½·m·r²g = 9.81 m/s²
μs =
15.Gears & gear trainsMedium
Nw​ = 72z = 1, 1450 rpm

A worm with 1 start(s) turns at 1450 rpm and drives a worm wheel with 72 teeth. Find the speed nw of the wheel.

z = 1Nw = 72n = 1450 rpm
nw = rpm
16.Gears & gear trainsHard
d1​ = 80 mmd2​ = 500 mm1440 rpmC = 800 mmθ = ?

An open belt connects an 80 mm pulley and a 500 mm pulley whose centres are 800 mm apart. Find the angle of wrap θ on the smaller pulley, in degrees.

d1 = 80 mmd2 = 500 mmC = 800 mm
θ = °
17.Springs & pendulumsMedium
L = 0.9 m

A simple pendulum has a length of 0.9 m. Use g = 9.81 m/s². Find its period T for small swings.

L = 0.9 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
1.5 kgk = 200 N/m100 m/s

An 8 g bullet moving at 100 m/s hits and stays in a 1.5 kg block resting on a frictionless surface. The block is attached to a horizontal spring with k = 200 N/m. Find the amplitude A of the resulting oscillation in cm.

m = 8 gv = 100 m/sM = 1.5 kgk = 200 N/m
A = cm
19.Mechanical vibrationsMedium
k = 50 kN/mζ = 0.35m = 12 kg

A 12 kg mass on a spring with a stiffness of 50 kN/m has a viscous damper giving a damping ratio of 0.35. Find the damped natural frequency fd of its free vibration in Hz.

m = 12 kgk = 50 kN/mζ = 0.35
fd = Hz
20.Mechanical vibrationsHard
k1​ = 20k2​ = 10m = 10 kg

A 10 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 20 kN/m and k₂ = 10 kN/m. The mass stays level. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 10 kgk1 = 20 kN/mk2 = 10 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: s = 13.02 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 45/3.6 = 12.5 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 12.5²/(2·6) = 13.02 m

Answer

s = 13.02 m
2.Kinematics

Answer: d = 54.73 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Two parts of the time

½·9.81·t₁² = 343·(3.5 − t₁)
4.905·t₁² + 343·t₁ − 1201 = 0

Fall time

Only the positive root is physical.

t₁ = (−343 + √(343² + 4·4.905·1201))/(2·4.905) = 3.34 s

Depth

d = ½·9.81·3.34² = 54.73 m

Answer

d = 54.73 m
3.Newton’s laws

Answer: a = 3.257 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 25° − 0.1·cos 25°) = 9.81·(0.4226 − 0.09063) = 3.257 m/s²

Answer

a = 3.257 m/s²
4.Newton’s laws

Answer: a = 3.434 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (58.86 − 17.66)/12 = 3.434 m/s²

Answer

a = 3.434 m/s²
5.Projectile motion

Answer: t = 4.456 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 34·cos 40° = 26.05 m/s
vy = v0·sin θ = 34·sin 40° = 21.85 m/s

Time in the air

Starting and landing at the same height: t = 2vy/g.

t = 2·21.85/9.81 = 4.456 s

Answer

t = 4.456 s
6.Projectile motion

Answer: x = 120.2 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

vx = 23.78 m/s, vy = 28.34 m/s

Time to land on the roof

Larger root: the ball is descending.

18 = 28.34·t − 4.905·t²
t = (28.34 + √(28.34² − 2·9.81·18))/9.81 = 5.052 s

Horizontal distance

x = vx·t = 23.78·5.052 = 120.2 m

Answer

x = 120.2 m
7.Circular motion

Answer: θ = 37.06 °

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Units

v = 120/3.6 = 33.33 m/s

Banking angle

tan θ = v²/(r·g) = 33.33²/(150·9.81) = 0.7551
θ = 37.06°

Answer

θ = 37.06°
8.Circular motion

Answer: vmin = 3.431 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Tension zero at the top

m·g = m·v²/r → v = √(g·r) = √(9.81·1.2) = 3.431 m/s

Answer

vmin = 3.431 m/s
9.Work & energy

Answer: Wf = 222.3 J

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Friction force

N = mg·cos θ = 98.1·0.9063 = 88.91 N
F = μN = 0.25·88.91 = 22.23 N

Work against friction

Wf = F·d = 22.23·10 = 222.3 J

Answer

Wf = 222.3 J
10.Work & energy

Answer: v = 8.831 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 9.81·(4.5 − 0.15·3.5) = 38.99 J

Speed at the spring

½mv² = mg(h − μL) → v = √(2g(h − μL)) = √(2·9.81·3.975) = 8.831 m/s

Answer

v = 8.831 m/s
11.Momentum & collisions

Answer: v′2 = 19.56 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (4 − 0.5)/(4 + 0.5)·11 = 8.556 m/s
v′2 = 2·4/(4 + 0.5)·11 = 19.56 m/s

Answer

v′2 = 19.56 m/s
12.Momentum & collisions

Answer: v = 340.3 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Rise of the block

h = L·(1 − cos θ) = 1·(1 − cos 25°) = 0.09369 m

Speed after impact

V = √(2·9.81·0.09369) = 1.356 m/s

Collision

v = (m + M)·V/m = 3.012·1.356/0.012 = 340.3 m/s

Answer

v = 340.3 m/s
13.Rigid-body rotation

Answer: v = 3.47 m/s

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Loss of potential energy

m·g·L/2 + mball·g·L = 5·9.81·0.25 + 2·9.81·0.5 = 22.07 J

Moment of inertia about the pin

IO = m·L²/3 + mball·L² = 0.4167 + 0.5 = 0.9167 kg·m²

Energy balance

½·IO·ω² = 22.07 → ω = √(2·22.07/0.9167) = 6.94 rad/s
v = ω·L = 6.94·0.5 = 3.47 m/s

Answer

v = 3.47 m/s
14.Rigid-body rotation

Answer: μs = 0.1554

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Equations of motion

m·g·sin θ − f = m·a
f·r = I·α = 0.5·m·r²·(a/r) → f = 0.5·m·a

Acceleration

a = g·sin θ/(1 + c) = 9.81·sin 25°/1.5 = 2.764 m/s²

Friction needed

f = c·m·a ≤ μ·m·g·cos θ → μ ≥ c·tan θ/(1 + c)
μs = 0.5·tan 25°/1.5 = 0.1554

Answer

μs = 0.1554
15.Gears & gear trains

Answer: nw = 20.14 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Wheel speed

nw = n·z/Nw = 1450·1/72 = 20.14 rpm

Answer

nw = 20.14 rpm
16.Gears & gear trains

Answer: θ = 149.6 °

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Belt angle

asin(0.2625) = 15.22°

Angle of wrap

θ = 180 − 2·15.22 = 149.6°

Answer

θ = 149.6°
17.Springs & pendulums

Answer: T = 1.903 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Pendulum period

T = 2π·√(0.9/9.81) = 1.903 s

Answer

T = 1.903 s
18.Springs & pendulums

Answer: A = 4.607 cm

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Speed after impact

V = m·v/(m + M) = 0.008·100/1.508 = 0.5305 m/s

Angular frequency

ω = √(k/(m + M)) = √(200/1.508) = 11.52 rad/s

Amplitude

A = V/ω = 0.5305/11.52 = 0.04607 m = 4.607 cm

Answer

A = 4.607 cm
19.Mechanical vibrations

Answer: fd = 9.624 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(50000/12) = 64.55 rad/s
fn = 64.55/(2π) = 10.27 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 10.27·√(1 − 0.35²) = 9.624 Hz

Answer

fd = 9.624 Hz
20.Mechanical vibrations

Answer: fn = 8.717 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 20 + 10 = 30 kN/m

Natural frequency

ωn = √(30000/10) = 54.77 rad/s
fn = 54.77/(2π) = 8.717 Hz

Answer

fn = 8.717 Hz

ExamProblems · examproblems.com/courses/dynamics