Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)t = ?13.89

A car driving at 50 km/h brakes with a constant deceleration of 6.5 m/s² until it stops. How long does braking take? Find t.

v₀ = 50 km/ha = −6.5 m/s²v = 0
t = s
2.KinematicsHard
a = 32 m/s²

A model rocket is launched straight up from rest. Its engine gives it a constant upward acceleration of 32 m/s² for 1 s, after which the engine stops and the rocket moves freely. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax the rocket reaches.

a = 32 m/s²t1 = 1 sg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
θ = 40°a = ?m = 10 kg

A 10 kg block slides down a slope at 40° to the horizontal. The coefficient of kinetic friction is 0.1. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 10 kgθ = 40°μ = 0.1g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 6.5 kg6.5 kgθ = 35°

A 6.5 kg block on a ramp at 35° is connected by a light string over a frictionless pulley at the top of the ramp to a hanging 6.5 kg mass. The hanging mass moves down. The coefficient of kinetic friction between block and ramp is 0.25. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 6.5 kgm2 = 6.5 kgθ = 35°μ = 0.25g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = 26 m/s65°range

A ball is launched at 65° above horizontal from level ground. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 26 m/sθ = 65°g = 9.81 m/s²
t = s
6.Projectile motionHard
h = 55 mv0​ = 28 m/s25°v = ?

A ball is launched at 28 m/s and 25° above the horizontal from the top of a 55 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the speed v with which it hits the ground.

v₀ = 28 m/sθ = 25°h = 55 mg = 9.81 m/s²
v = m/s
7.Circular motionMedium
L = 1.3 m20°

A small ball on a string of length 1.3 m moves in a horizontal circle so that the string makes a constant angle of 20° with the vertical (a conical pendulum). Use g = 9.81 m/s². Find the speed v of the ball.

L = 1.3 mθ = 20°g = 9.81 m/s²
v = m/s
8.Circular motionHard
r = 0.7 mv = 6 m/s

A 2 kg ball on a string 0.7 m long is swung in a vertical circle. At the lowest point it moves at 6 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.

m = 2 kgr = 0.7 mv = 6 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
0.25 kgk = 400 N/mh = ?

A toy launcher has a vertical spring of stiffness 400 N/m. A 0.25 kg ball is placed on it and the spring is compressed by 5 cm, then released. Ignoring air resistance and the spring’s mass, find the height h the ball rises, measured from its position when the spring was compressed.

m = 0.25 kgk = 400 N/mx = 5 cmg = 9.81 m/s²
h = m
10.Work & energyHard
h = 3.5 mL = 5 mμ = 0.15k = 2000 N/m

A 0.5 kg block is released from rest at height 3.5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 5 m long (μ = 0.15) and then runs onto a spring (k = 2000 N/m) on a smooth surface. Find the maximum compression x of the spring.

m = 0.5 kgh = 3.5 mL = 5 mμ = 0.15k = 2000 N/mg = 9.81 m/s²
x = cm
11.Momentum & collisionsMedium
4 kgv = ?8 gh = 19 cm

An 8 g bullet is fired horizontally into a 4 kg wooden block hanging on light strings, and stays inside it. The block swings up until it is 19 cm higher than at the start. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 8 gM = 4 kgh = 19 cmg = 9.81 m/s²
v = m/s
12.Momentum & collisionsHard
11 m/s5 m/s

A 0.25 kg ball hits a wall at 11 m/s and bounces straight back at 5 m/s. The contact lasts 50 ms. Find the magnitude of the impulse J the wall gives the ball.

m = 0.25 kgvin = 11 m/svout = 5 m/sΔt = 50 ms
J = N·s
13.Rigid-body rotationMedium
L = 1.5 mm = 2 kgα

A uniform slender rod of mass 2 kg and length 1.5 m is pinned at one end and held horizontal. It is released from rest. Use g = 9.81 m/s². Find the vertical force R that the pin exerts on the rod just after release.

m = 2 kgL = 1.5 mg = 9.81 m/s²
R = N
14.Rigid-body rotationHard
2 m/sω

A solid sphere of mass 19 kg rolls without slipping at 2 m/s. Find its rotational kinetic energy Erot.

m = 19 kgv = 2 m/sI = (2/5)·m·r²
Erot = J
15.Gears & gear trainsMedium
Tw​ = ?z = 4, 1440 rpm

A 1.1 kW motor at 1440 rpm drives a worm with 4 start(s). The worm wheel has 36 teeth and the drive has an efficiency of 55%. Find the output torque Tw on the wheel shaft.

z = 4Nw = 36n = 1440 rpmP = 1.1 kWη = 55%
Tw = N·m
16.Gears & gear trainsHard
d1​ = 125 mmd2​ = 200 mm1500 rpmC = 800 mmθ = ?

An open belt connects a 125 mm pulley and a 200 mm pulley whose centres are 800 mm apart. Find the angle of wrap θ on the smaller pulley, in degrees.

d1 = 125 mmd2 = 200 mmC = 800 mm
θ = °
17.Springs & pendulumsMedium
L = ?

How long must a simple pendulum be to have a period of 3 s? Use g = 9.81 m/s². Find L.

T = 3 sg = 9.81 m/s²
L = m
18.Springs & pendulumsHard
3.2 kgk = 160 N/mA = 19 cm

A 3.2 kg mass on a spring with k = 160 N/m is pulled 19 cm from equilibrium and released. Find the total energy E of the oscillation.

m = 3.2 kgk = 160 N/mA = 19 cm
E = J
19.Mechanical vibrationsMedium
tx40 mm3 cycles15.6 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 40 mm is followed 3 cycles later by a peak of 15.6 mm. Find the damping ratio ζ.

x0 = 40 mmx3 = 15.6 mmn = 3
ζ =
20.Mechanical vibrationsHard
k1​ = 50k2​ = 10k3​ = 40m = 5 kg

A 5 kg mass hangs from spring k₃ = 40 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 50 kN/m and k₂ = 10 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 5 kgk1 = 50 kN/mk2 = 10 kN/mk3 = 40 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: t = 2.137 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 50/3.6 = 13.89 m/s

Braking time

0 = v₀ − a·t → t = v₀/a = 13.89/6.5 = 2.137 s

Answer

t = 2.137 s
2.Kinematics

Answer: hmax = 68.19 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Powered phase

v₁ = 32·1 = 32 m/s
h₁ = ½·32·1² = 16 m

Free flight up

At the top the velocity is zero.

Δh = v₁²/(2g) = 32²/(2·9.81) = 52.19 m
hmax = 16 + 52.19 = 68.19 m

Answer

hmax = 68.19 m
3.Newton’s laws

Answer: a = 5.554 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 40° − 0.1·cos 40°) = 9.81·(0.6428 − 0.0766) = 5.554 m/s²

Answer

a = 5.554 m/s²
4.Newton’s laws

Answer: T = 56.7 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the string

m₂·g = 63.77 N
m₁·g·sin θ = 36.57 N
μ·m₁·g·cos θ = 13.06 N

Acceleration of the system

a = (63.77 − 36.57 − 13.06)/13 = 1.087 m/s²

Tension from the hanging mass

m2·g − T = m2·a → T = 6.5·(9.81 − 1.087) = 56.7 N

Answer

T = 56.7 N
5.Projectile motion

Answer: t = 4.804 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 26·cos 65° = 10.99 m/s
vy = v0·sin θ = 26·sin 65° = 23.56 m/s

Time in the air

Starting and landing at the same height: t = 2vy/g.

t = 2·23.56/9.81 = 4.804 s

Answer

t = 4.804 s
6.Projectile motion

Answer: v = 43.16 m/s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

vx = 28·cos 25° = 25.38 m/s
vy0 = 28·sin 25° = 11.83 m/s

Vertical speed at impact

Energy or v² = v₀² + 2as in the vertical direction.

vy = √(11.83² + 2·9.81·55) = 34.92 m/s

Impact speed

v = √(25.38² + 34.92²) = 43.16 m/s

Answer

v = 43.16 m/s

Check with energy: v² = v₀² + 2gh.

7.Circular motion

Answer: v = 1.26 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Radius of the circle

r = L·sin θ = 1.3·sin 20° = 0.4446 m

Speed

Tension and gravity together give the inward force: tan θ = v²/(r·g).

v = √(r·g·tan θ) = √(0.4446·9.81·tan 20°) = 1.26 m/s

Answer

v = 1.26 m/s
8.Circular motion

Answer: T = 122.5 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the lowest point

Towards the centre (up) is positive.

T − m·g = m·v²/r
T = 2·9.81 + 2·6²/0.7 = 19.62 + 102.9 = 122.5 N

Answer

T = 122.5 N
9.Work & energy

Answer: h = 0.2039 m

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Spring energy

x = 5 cm = 0.05 m
½kx² = ½·400·0.05² = 0.5 J

Height

m·g = 0.25·9.81 = 2.453 N
h = ½kx²/(mg) = 0.5/2.453 = 0.2039 m

Answer

h = 0.2039 m
10.Work & energy

Answer: x = 11.61 cm

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 4.905·(3.5 − 0.15·5) = 13.49 J

Maximum compression

½kx² = 13.49 → x = √(2·13.49/2000) = 0.1161 m = 11.61 cm

Answer

x = 11.61 cm
11.Momentum & collisions

Answer: v = 967.3 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Swing after impact

V = √(2·g·h) = √(2·9.81·0.19) = 1.931 m/s

Collision

m·v = (m + M)·V → v = (0.008 + 4)·1.931/0.008 = 967.3 m/s

Answer

v = 967.3 m/s
12.Momentum & collisions

Answer: J = 4 N·s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.25·(5 + 11) = 4 N·s

Answer

J = 4 N·s
13.Rigid-body rotation

Answer: R = 4.905 N

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Moments about the pin

At the moment of release ω = 0, so there is no centripetal acceleration and the centre accelerates straight down.

m·g·L/2 = (m·L²/3)·α → α = 3g/(2L) = 3·9.81/(2·1.5) = 9.81 rad/s²

Vertical forces

aG = α·L/2 = 7.357 m/s²
m·g − R = m·aG → R = 2·(9.81 − 7.357) = 4.905 N

Answer

R = 4.905 N

R = m·g/4, independent of the length.

14.Rigid-body rotation

Answer: Erot = 15.2 J

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Translational and rotational parts

Etrans = ½·m·v² = ½·19·2² = 38 J
Erot = ½·I·ω² = ½·0.4·m·r²·(v/r)² = 0.4·38 = 15.2 J

Answer

Erot = 15.2 J
15.Gears & gear trains

Answer: Tw = 36.11 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Wheel speed

nw = n·z/Nw = 1440·4/36 = 160 rpm

Output torque

ωw = 2π·160/60 = 16.76 rad/s
Tw = η·P/ωw = 0.55·1100/16.76 = 36.11 N·m

Answer

Tw = 36.11 N·m
16.Gears & gear trains

Answer: θ = 174.6 °

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Belt angle

asin(0.04688) = 2.687°

Angle of wrap

θ = 180 − 2·2.687 = 174.6°

Answer

θ = 174.6°
17.Springs & pendulums

Answer: L = 2.236 m

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Solve for the length

L = g·(T/2π)² = 9.81·(3/2π)² = 2.236 m

Answer

L = 2.236 m
18.Springs & pendulums

Answer: E = 2.888 J

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(160/3.2) = 7.071 rad/s

Energy

E = ½·k·A² = ½·160·0.19² = 2.888 J

Answer

E = 2.888 J
19.Mechanical vibrations

Answer: ζ = 0.04989

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/3)·ln(40/15.6) = 0.3139

Damping ratio

ζ = δ/√(4π² + δ²) = 0.3139/√(39.48 + 0.09851) = 0.04989

Answer

ζ = 0.04989
20.Mechanical vibrations

Answer: fn = 11.03 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 50 + 10 = 60 kN/m
keq = 60·40/(60 + 40) = 24 kN/m

Natural frequency

ωn = √(24000/5) = 69.28 rad/s
fn = 69.28/(2π) = 11.03 Hz

Answer

fn = 11.03 Hz

ExamProblems · examproblems.com/courses/dynamics