In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Kinematics
Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h
Method
List what you know: v₀, v, a, t and s, with units.
Pick the equation that contains your three knowns and the unknown.
Choose one positive direction and give opposing quantities a minus sign.
Solve and check that the answer is physically sensible.
Newton’s laws
Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ
Method
Draw a free-body diagram with every force on the body.
Choose a positive direction along the motion.
Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
Apply ΣF = m·a along the motion; friction is μ·N against the motion.
Projectile motion
Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g
Method
Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
The horizontal motion has constant speed; the vertical motion has acceleration −g.
Find the time of flight from the vertical motion.
Use that time in the horizontal motion to find the range.
Circular motion
Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)
Work & energy
Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t
Momentum & collisions
Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv
Method
Choose a positive direction and give each velocity its sign.
Write the total momentum before: Σm·v.
For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
Set momentum before equal to momentum after and solve.
Rigid-body rotation
Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω
Method
Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.
Gears & gear trains
Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios
Springs & pendulums
Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²
Mechanical vibrations
Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2
2Practice problems
1.KinematicsMedium
A car driving at 100 km/h brakes with a constant deceleration of 3 m/s² until it stops. How long does braking take? Find t.
v₀ = 100 km/ha = −3 m/s²v = 0
t = s
2.KinematicsHard
A ball is thrown straight up at 9 m/s from the edge of a roof 5 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.
v₀ = 9 m/sh₀ = 5 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
A 12 kg block slides down a frictionless slope at 45° to the horizontal. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.
m = 12 kgθ = 45°μ = 0g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
A block is given a push so that it starts sliding up a ramp at 30° with a speed of 11.5 m/s. The coefficient of kinetic friction is 0.25. Use g = 9.81 m/s². How far d along the ramp does it slide before it stops?
v₀ = 11.5 m/sθ = 30°μ = 0.25g = 9.81 m/s²
d = m
5.Projectile motionMedium
A ball is kicked from level ground at 40 m/s and 40° above the horizontal towards a wall 32 m away. Ignore air resistance and use g = 9.81 m/s². At what height y does the ball pass the wall?
v₀ = 40 m/sθ = 40°x = 32 mg = 9.81 m/s²
y = m
6.Projectile motionHard
A ball is launched at 20° above horizontal from the top of a 40 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.
v0 = 21 m/sθ = 20°h = 40 mg = 9.81 m/s²
x = m
7.Circular motionMedium
In a fairground rotor, riders stand against the wall of a vertical cylinder of radius 3.8 m. When it spins fast enough the floor drops away and friction holds them up. The coefficient of static friction is 0.6. Use g = 9.81 m/s². Find the smallest rotation rate n in revolutions per minute.
r = 3.8 mμs = 0.6g = 9.81 m/s²
n = rpm
8.Circular motionHard
A curve of radius 240 m is banked at 12°, and the coefficient of static friction between tyres and road is 0.1. Use g = 9.81 m/s². Find the lowest speed vmin at which a car can take the curve without sliding down the bank.
r = 240 mθ = 12°μs = 0.1g = 9.81 m/s²
vmin = m/s
9.Work & energyMedium
A 2 kg block slides 11 m down a slope at 20° to the horizontal, with a coefficient of kinetic friction of 0.15. Find the work Wf done against friction.
m = 2 kgθ = 20°μ = 0.15d = 11 mg = 9.81 m/s²
Wf = J
10.Work & energyHard
A 2 kg cart is released from rest at a height of 3 m on a smooth track that leads into a vertical circular loop of radius 1 m. Find the normal force N the track exerts on the cart at the top of the loop.
m = 2 kgh = 3 mR = 1 mg = 9.81 m/s²
N = N
11.Momentum & collisionsMedium
An 8 g bullet is fired horizontally into a 4 kg wooden block hanging on light strings, and stays inside it. The block swings up until it is 9 cm higher than at the start. Use g = 9.81 m/s². Find the speed v of the bullet before impact.
m = 8 gM = 4 kgh = 9 cmg = 9.81 m/s²
v = m/s
12.Momentum & collisionsHard
A 20 g bullet is fired horizontally into a 3.5 kg block hanging from light strings 0.6 m long, and stays in it. The strings swing out to a largest angle of 35° from the vertical. Use g = 9.81 m/s². Find the speed v of the bullet before impact.
m = 20 gM = 3.5 kgL = 0.6 mθ = 35°g = 9.81 m/s²
v = m/s
13.Rigid-body rotationMedium
A motor brings a flywheel with a moment of inertia of 0.5 kg·m² from rest up to 1500 rpm in 25 s. Ignoring losses, find the average power Pavg it delivers, in kW.
I = 0.5 kg·m²n = 1500 rpmt = 25 s
Pavg = kW
14.Rigid-body rotationHard
A uniform solid disc (mass 26 kg, radius 0.5 m) spins freely at 1200 rpm about a vertical frictionless shaft. A thin ring of mass 1 kg and the same radius is dropped onto it from rest, centred on the shaft, and the two quickly spin together. How much kinetic energy ΔE is lost in the process?
Mdisc = 26 kgMring = 1 kgR = 0.5 mn1 = 1200 rpm
ΔE = J
15.Gears & gear trainsMedium
An 11 kW motor running at 1450 rpm drives a pinion with 20 teeth, which meshes with a gear with 80 teeth. The gear pair has an efficiency of 96%. Find the torque T1 on the motor shaft.
P = 11 kWn1 = 1450 rpmN1 = 20N2 = 80η = 96%
T1 = N·m
16.Gears & gear trainsHard
In a compound gear train, gear A (32 teeth) on the input shaft turning at 3000 rpm drives gear B (80 teeth). Gear C (20 teeth) is fixed to the same shaft as B and drives gear D (30 teeth) on the output shaft. Find the output speed nout.
nin = 3000 rpmA = 32B = 80C = 20D = 30
nout = rpm
17.Springs & pendulumsMedium
A 3.7 kg mass on a spring with k = 330 N/m is pulled 10 cm in the positive direction and released from rest at t = 0. Find its displacement x from equilibrium at t = 0.85 s (with sign).
m = 3.7 kgk = 330 N/mA = 10 cmt = 0.85 s
x = cm
18.Springs & pendulumsHard
A 2.1 kg mass on a spring with k = 130 N/m is pulled 19 cm from equilibrium and released. Find the total energy E of the oscillation.
m = 2.1 kgk = 130 N/mA = 19 cm
E = J
19.Mechanical vibrationsMedium
A 250 kg mass is supported by a spring with a stiffness of 200 kN/m and a viscous damper with a damping coefficient of 710 N·s/m. Find the damping ratio ζ.
m = 250 kgk = 200 kN/mc = 710 N·s/m
ζ =
20.Mechanical vibrationsHard
A 50 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 80 kN/m and the lower one k₂ = 30 kN/m. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.
m = 50 kgk1 = 80 kN/mk2 = 30 kN/m
fn = Hz
3Solutions
1.Kinematics
Answer: t = 9.259 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v₀ = 100/3.6 = 27.78 m/s
Braking time
0 = v₀ − a·t → t = v₀/a = 27.78/3 = 9.259 s
Answer
t = 9.259 s
2.Kinematics
Answer: t = 2.282 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equation of motion
Up is positive and the ground is h₀ below the starting point.
−5 = 9·t − ½·9.81·t²
4.905·t² − 9·t − 5 = 0
Solve the quadratic
Only the positive root is physical.
t = (9 + √(9² + 2·9.81·5))/9.81 = 2.282 s
Answer
t = 2.282 s
3.Newton’s laws
Answer: a = 6.937 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Deceleration
Both forces point down the slope; the mass cancels.
a = 9.81·(sin 30° + 0.25·cos 30°) = 7.029 m/s²
Distance
d = v₀²/(2a) = 11.5²/(2·7.029) = 9.408 m
Answer
d = 9.408 m
5.Projectile motion
Answer: y = 21.5 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Time to the wall
vx = 40·cos 40° = 30.64 m/s
t = x/vx = 32/30.64 = 1.044 s
Height at that time
y = 25.71·1.044 − ½·9.81·1.044² = 21.5 m
Answer
y = 21.5 m
The ball is still rising at the wall.
6.Projectile motion
Answer: x = 72.62 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 21·cos 20° = 19.73 m/s
vy = v0·sin θ = 21·sin 20° = 7.182 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 40 + 7.182·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (7.182 + √(51.59 + 784.8))/9.81 = 3.68 s
Horizontal distance
x = vx·t = 19.73·3.68 = 72.62 m
Answer
x = 72.62 m
7.Circular motion
Answer: n = 19.81 rpm
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Forces on a rider
N = m·ω²·r
μ·N = m·g → μ·ω²·r = g
Angular speed
ω = √(g/(μ·r)) = √(9.81/(0.6·3.8)) = 2.074 rad/s
Rotation rate
n = ω·60/(2π) = 19.81 rpm
Answer
n = 19.81 rpm
8.Circular motion
Answer: vmin = 16.11 m/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Force balances
Friction points up the slope.
N·(sin θ − μ·cos θ) = m·v²/r
N·(cos θ + μ·sin θ) = m·g
Speed
v = √(240·9.81·0.1101/0.9989) = 16.11 m/s
Answer
vmin = 16.11 m/s
(57.99 km/h)
9.Work & energy
Answer: Wf = 30.42 J
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Friction force
N = mg·cos θ = 19.62·0.9397 = 18.44 N
F = μN = 0.15·18.44 = 2.766 N
Work against friction
Wf = F·d = 2.766·11 = 30.42 J
Answer
Wf = 30.42 J
10.Work & energy
Answer: N = 19.62 N
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.
Speed at the top
v² = 2g(h − 2R) = 2·9.81·(3 − 2) = 19.62 m²/s²
Forces at the top
m·g = 2·9.81 = 19.62 N
N = mv²/R − mg = 2·19.62/1 − 19.62 = 19.62 N
Answer
N = 19.62 N
The cart just makes it round when h = 2.5R; then N = 0 at the top.
11.Momentum & collisions
Answer: v = 665.7 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Swing after impact
V = √(2·g·h) = √(2·9.81·0.09) = 1.329 m/s
Collision
m·v = (m + M)·V → v = (0.008 + 4)·1.329/0.008 = 665.7 m/s
Answer
v = 665.7 m/s
12.Momentum & collisions
Answer: v = 256.8 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Rise of the block
h = L·(1 − cos θ) = 0.6·(1 − cos 35°) = 0.1085 m
Speed after impact
V = √(2·9.81·0.1085) = 1.459 m/s
Collision
v = (m + M)·V/m = 3.52·1.459/0.02 = 256.8 m/s
Answer
v = 256.8 m/s
13.Rigid-body rotation
Answer: Pavg = 0.2467 kW
Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.
Angular velocity
ω = 2π·1500/60 = 157.1 rad/s
Energy
E = ½·I·ω² = ½·0.5·157.1² = 6169 J
Average power
Pavg = E/t = 6169/25 = 246.7 W = 0.2467 kW
Answer
Pavg = 0.2467 kW
14.Rigid-body rotation
Answer: ΔE = 1833 J
Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.
Moments of inertia
I1 = ½·26·0.5² = 3.25 kg·m²
I2 = 1·0.5² = 0.25 kg·m²
Conservation of angular momentum
n2 = n1·I1/(I1 + I2) = 1200·3.25/3.5 = 1114 rpm
Kinetic energy before and after
E1 = ½·3.25·125.7² = 25661 J
E2 = ½·3.5·116.7² = 23828 J
ΔE = 25661 − 23828 = 1833 J
Answer
ΔE = 1833 J
15.Gears & gear trains
Answer: T1 = 72.44 N·m
Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.
Motor torque
ω₁ = 2π·1450/60 = 151.8 rad/s
T1 = P/ω₁ = 11000/151.8 = 72.44 N·m
Answer
T1 = 72.44 N·m
16.Gears & gear trains
Answer: nout = 800 rpm
Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.
First stage
nB = 3000·32/80 = 1200 rpm = nC
Second stage
nout = 1200·20/30 = 800 rpm
Answer
nout = 800 rpm
total ratio = 3.75 : 1
17.Springs & pendulums
Answer: x = −1.726 cm
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Angular frequency
ω = √(330/3.7) = 9.444 rad/s
ω·t = 9.444·0.85 = 8.027 rad
Displacement
x = A·cos(ω·t) = 10·cos(8.027) = −1.726 cm
Answer
x = −1.726 cm
18.Springs & pendulums
Answer: E = 2.346 J
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Angular frequency
ω = √(130/2.1) = 7.868 rad/s
Energy
E = ½·k·A² = ½·130·0.19² = 2.346 J
Answer
E = 2.346 J
19.Mechanical vibrations
Answer: ζ = 0.0502
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Critical damping
cc = 2·√(k·m) = 2·√(200000·250) = 14142 N·s/m
Damping ratio
ζ = c/cc = 710/14142 = 0.0502
Answer
ζ = 0.0502
ζ < 1, so the system is underdamped and oscillates as it decays.
20.Mechanical vibrations
Answer: fn = 3.325 Hz
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Equivalent stiffness
Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.