Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)3.704 s16.67

A car driving at 60 km/h brakes with a constant deceleration of 4.5 m/s² until it stops. Find the braking distance s.

v₀ = 60 km/ha = −4.5 m/s²v = 0
s = m
2.KinematicsHard
v₀ = 19 m/s10 m

A ball is thrown straight up at 19 m/s from the edge of a roof 10 m above the ground. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax above the ground.

v₀ = 19 m/sh₀ = 10 mg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
θ = 45°a = ?m = 6 kg

A 6 kg block slides down a slope at 45° to the horizontal. The coefficient of kinetic friction is 0.3. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 6 kgθ = 45°μ = 0.3g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 4.5 kg3.5 kgμ = 0.1

A 4.5 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 3.5 kg mass. The coefficient of kinetic friction between block and table is 0.1. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 4.5 kgm2 = 3.5 kgμ = 0.1g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = 24 m/sθ = ?R = 35 m

A ball is launched from level ground at 24 m/s and must land 35 m away. Ignore air resistance and use g = 9.81 m/s². Find the smaller of the two possible launch angles θ.

v₀ = 24 m/sR = 35 mg = 9.81 m/s²
θ = °
6.Projectile motionHard
h = 35 mv0​ = 18 m/s15°α = ?

A ball is launched at 18 m/s and 15° above the horizontal from the top of a 35 m cliff. Ignore air resistance and use g = 9.81 m/s². At what angle α below the horizontal does it hit the ground?

v₀ = 18 m/sθ = 15°h = 35 mg = 9.81 m/s²
α = °
7.Circular motionMedium
r = 130 mvmax​ = ?

A car takes a flat curve of radius 130 m. The coefficient of static friction between tyres and road is 0.4. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 130 mμs = 0.4g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
r = 0.5 m8.5 m/svtop​ = ?

A 1.3 kg ball on a light string 0.5 m long is swung in a vertical circle. At the lowest point its speed is 8.5 m/s. Ignore air resistance and use g = 9.81 m/s². Find the tension Ttop in the string at the highest point.

m = 1.3 kgr = 0.5 mvbottom = 8.5 m/sg = 9.81 m/s²
Ttop = N
9.Work & energyMedium
15°d = 14 mμ = 0.15

A 10 kg block slides 14 m down a slope at 15° to the horizontal, with a coefficient of kinetic friction of 0.15. Find the work Wf done against friction.

m = 10 kgθ = 15°μ = 0.15d = 14 mg = 9.81 m/s²
Wf = J
10.Work & energyHard
2 kg6 kgμ = 0.15d = 2 m

A 2 kg block rests on a rough horizontal table (μ = 0.15). A light string runs from it over a smooth pulley at the edge of the table to a hanging 6 kg block. The system is released from rest. Find the speed v of the blocks after the hanging block has dropped 2 m.

m1 = 2 kgm2 = 6 kgμ = 0.15d = 2 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
15 kg60 m/s3 kgv′2​ = ?

An 18 kg projectile moving horizontally at 20 m/s explodes into two fragments that move along the same line. The 15 kg fragment continues forwards at 60 m/s. Find the velocity v′2 of the 3 kg fragment (positive in the original direction).

M = 18 kgu = 20 m/sm1 = 15 kgv′1 = 60 m/sm2 = 3 kg
v′2 = m/s
12.Momentum & collisionsHard
1200 kg9 m/s1000 kg9 m/sv′ = ?

At a crossing a 1200 kg car travelling east at 9 m/s collides with a 1000 kg car travelling north at 9 m/s. The cars lock together. Find the speed v′ of the wreck just after the collision.

m1 = 1200 kgv1 = 9 m/s (E)m2 = 1000 kgv2 = 9 m/s (N)
v′ = m/s
13.Rigid-body rotationMedium
n = 600 rpmT = 1630 N·m

A motor delivers a torque of 1630 N·m at 600 rpm. Find its power output P in kW.

T = 1630 N·mn = 600 rpm
P = kW
14.Rigid-body rotationHard
400 m/s50 g0.68 mL = 1.2 m8 kgφ

A uniform slender rod of mass 8 kg and length 1.2 m hangs at rest from a frictionless pivot at its top end. A 50 g bullet moving horizontally at 400 m/s hits the rod 0.68 m below the pivot and stays embedded. Use g = 9.81 m/s². Find the largest angle φ from the vertical through which the rod swings.

M = 8 kgL = 1.2 mm = 50 gv = 400 m/sd = 0.68 mg = 9.81 m/s²
φ = °
15.Gears & gear trainsMedium
N1​ = 45N2​ = 50

A 3 kW motor running at 1500 rpm drives a pinion with 45 teeth, which meshes with a gear with 50 teeth. Ignore losses. Find the torque T1 on the motor shaft.

P = 3 kWn1 = 1500 rpmN1 = 45N2 = 50η = 100%
T1 = N·m
16.Gears & gear trainsHard
A = 20B = 40C = 15D = ?

In a compound gear train, gear A (20 teeth) on the input shaft turns at 3000 rpm and drives gear B (40 teeth). Gear C (15 teeth) is fixed to the same shaft as B and drives gear D on the output shaft. The output must turn at 375 rpm. How many teeth ND must gear D have?

nin = 3000 rpmA = 20B = 40C = 15nout = 375 rpm
ND =
17.Springs & pendulumsMedium
L = 1.5 m

A simple pendulum has a length of 1.5 m. Use g = 9.81 m/s². Find its period T for small swings.

L = 1.5 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
0.2 kgk = 70 N/mA = 12 cm

A 0.2 kg mass on a spring with k = 70 N/m is pulled 12 cm from equilibrium and released. Find its maximum acceleration amax.

m = 0.2 kgk = 70 N/mA = 12 cm
amax = m/s²
19.Mechanical vibrationsMedium
k = 200 kN/mζ = 0.45m = 250 kg

A 250 kg mass on a spring with a stiffness of 200 kN/m has a viscous damper giving a damping ratio of 0.45. Find the damped natural frequency fd of its free vibration in Hz.

m = 250 kgk = 200 kN/mζ = 0.45
fd = Hz
20.Mechanical vibrationsHard
k1​ = 20k2​ = 100m = 25 kg

A 25 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 20 kN/m and the lower one k₂ = 100 kN/m. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 25 kgk1 = 20 kN/mk2 = 100 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: s = 30.86 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 60/3.6 = 16.67 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 16.67²/(2·4.5) = 30.86 m

Answer

s = 30.86 m
2.Kinematics

Answer: hmax = 28.4 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Rise above the roof

0 = v₀² − 2·g·Δh → Δh = 19²/(2·9.81) = 18.4 m

Height above the ground

hmax = 10 + 18.4 = 28.4 m

Answer

hmax = 28.4 m
3.Newton’s laws

Answer: a = 4.856 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 45° − 0.3·cos 45°) = 9.81·(0.7071 − 0.2121) = 4.856 m/s²

Answer

a = 4.856 m/s²
4.Newton’s laws

Answer: T = 21.24 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (34.34 − 4.415)/8 = 3.74 m/s²

Tension from the block on the table

T − μ·m1·g = m1·a
T = 4.5·3.74 + 4.415 = 21.24 N

Answer

T = 21.24 N
5.Projectile motion

Answer: θ = 18.3 °

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Range formula

R = v₀²·sin 2θ/g → sin 2θ = 9.81·35/24² = 0.5961

Angle

2θ = 36.59° → θ = 18.3°

Answer

θ = 18.3°

The other solution is 90° − θ = 71.7°.

6.Projectile motion

Answer: α = 56.85 °

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

vx = 18·cos 15° = 17.39 m/s
vy0 = 18·sin 15° = 4.659 m/s

Vertical speed at impact

Energy or v² = v₀² + 2as in the vertical direction.

vy = √(4.659² + 2·9.81·35) = 26.62 m/s

Impact angle

tan α = vy/vx = 26.62/17.39 → α = 56.85°

Answer

α = 56.85°
7.Circular motion

Answer: vmax = 22.59 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.4·9.81·130) = 22.59 m/s

Answer

vmax = 22.59 m/s (81.31 km/h)
8.Circular motion

Answer: Ttop = 124.1 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Speed at the top

Kinetic energy is traded for potential energy over a height 2r.

vtop² = 8.5² − 4·9.81·0.5 = 52.63 m²/s²

Forces at the top

Tension and gravity both point down, towards the centre.

T + m·g = m·vtop²/r
T = 1.3·52.63/0.5 − 1.3·9.81 = 124.1 N

Answer

Ttop = 124.1 N
9.Work & energy

Answer: Wf = 199 J

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Friction force

N = mg·cos θ = 98.1·0.9659 = 94.76 N
F = μN = 0.15·94.76 = 14.21 N

Work against friction

Wf = F·d = 14.21·14 = 199 J

Answer

Wf = 199 J
10.Work & energy

Answer: v = 5.288 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy released and lost

m₂g·d = 58.86·2 = 117.7 J
μ·m₁g·d = 0.15·19.62·2 = 5.886 J

Kinetic energy of both blocks

½(m₁ + m₂)v² = 111.8 → v = √(2·111.8/8) = 5.288 m/s

Answer

v = 5.288 m/s
11.Momentum & collisions

Answer: v′2 = −180 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum before

p = M·u = 18·20 = 360 kg·m/s

Momentum after

360 = 15·60 + 3·v′2
v′2 = (360 − 900)/3 = −180 m/s

Answer

v′2 = −180 m/s

The minus sign means the second fragment flies backwards.

12.Momentum & collisions

Answer: v′ = 6.39 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum components

px = 1200·9 = 10800 kg·m/s
py = 1000·9 = 9000 kg·m/s

Speed of the wreck

v′ = √(px² + py²)/(m1 + m2) = 14058/2200 = 6.39 m/s

Answer

v′ = 6.39 m/s
13.Rigid-body rotation

Answer: P = 102.4 kW

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·600/60 = 62.83 rad/s

Power

P = T·ω = 1630·62.83 = 102416 W = 102.4 kW

Answer

P = 102.4 kW
14.Rigid-body rotation

Answer: φ = 60.32 °

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Moment of inertia after the impact

I = M·L²/3 + m·d² = 8·1.2²/3 + 0.05·0.68² = 3.863 kg·m²

Angular momentum about the pivot

The pivot force passes through the pivot, so it has no moment there during the impact.

m·v·d = I·ω → ω = 0.05·400·0.68/3.863 = 3.52 rad/s

Energy during the swing

½·I·ω² = ½·3.863·3.52² = 23.94 J
(M·g·L/2 + m·g·d)·(1 − cos φ) = 47.42·(1 − cos φ)
cos φ = 1 − 23.94/47.42 = 0.4952 → φ = 60.32°

Answer

φ = 60.32°
15.Gears & gear trains

Answer: T1 = 19.1 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·1500/60 = 157.1 rad/s
T1 = P/ω₁ = 3000/157.1 = 19.1 N·m

Answer

T1 = 19.1 N·m
16.Gears & gear trains

Answer: ND = 60

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Intermediate shaft speed

nB = nC = 3000·20/40 = 1500 rpm

Teeth on gear D

ND = C·nC/nout = 15·1500/375 = 60

Answer

ND = 60
17.Springs & pendulums

Answer: T = 2.457 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Pendulum period

T = 2π·√(1.5/9.81) = 2.457 s

Answer

T = 2.457 s
18.Springs & pendulums

Answer: amax = 42 m/s²

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(70/0.2) = 18.71 rad/s

Maximum acceleration

amax = A·ω² = 0.12·18.71² = 42 m/s²

Answer

amax = 42 m/s²
19.Mechanical vibrations

Answer: fd = 4.02 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(200000/250) = 28.28 rad/s
fn = 28.28/(2π) = 4.502 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 4.502·√(1 − 0.45²) = 4.02 Hz

Answer

fd = 4.02 Hz
20.Mechanical vibrations

Answer: fn = 4.109 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.

1/keq = 1/20 + 1/100 → keq = 20·100/(20 + 100) = 16.67 kN/m

Natural frequency

ωn = √(16667/25) = 25.82 rad/s
fn = 25.82/(2π) = 4.109 Hz

Answer

fn = 4.109 Hz

ExamProblems · examproblems.com/courses/dynamics