Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)3.333 s10

A car driving at 36 km/h brakes with a constant deceleration of 3 m/s² until it stops. Find the braking distance s.

v₀ = 36 km/ha = −3 m/s²v = 0
s = m
2.KinematicsHard
v₀ = 5 m/s10 m

A ball is thrown straight up at 5 m/s from the edge of a roof 10 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 5 m/sh₀ = 10 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
θ = 20°a = ?m = 13 kg

A 13 kg block slides down a frictionless slope at 20° to the horizontal. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 13 kgθ = 20°μ = 0g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
θ = 20°blockv₀ = 4 m/s

A block is given a push so that it starts sliding up a ramp at 20° with a speed of 4 m/s. The coefficient of kinetic friction is 0.3. Use g = 9.81 m/s². How far d along the ramp does it slide before it stops?

v₀ = 4 m/sθ = 20°μ = 0.3g = 9.81 m/s²
d = m
5.Projectile motionMedium
v0​ = 12 m/s65°range

A ball is launched at 65° above horizontal from level ground. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 12 m/sθ = 65°g = 9.81 m/s²
t = s
6.Projectile motionHard
h = 40 mv0​ = 10 m/s50°H = ?

A ball is launched at 10 m/s and 50° above the horizontal from the top of a 40 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the greatest height H above the ground at the foot of the cliff.

v₀ = 10 m/sθ = 50°h = 40 mg = 9.81 m/s²
H = m
7.Circular motionMedium
r = 105 m21 m/s

A 1300 kg car drives over the top of a hump in the road at 21 m/s. The top of the hump is a circular arc of radius 105 m. Use g = 9.81 m/s². Find the normal force N of the road on the car at the top.

m = 1300 kgv = 21 m/sr = 105 mg = 9.81 m/s²
N = N
8.Circular motionHard
r = 1.1 m10.5 m/svtop​ = ?

A 0.2 kg ball on a light string 1.1 m long is swung in a vertical circle. At the lowest point its speed is 10.5 m/s. Ignore air resistance and use g = 9.81 m/s². Find the tension Ttop in the string at the highest point.

m = 0.2 kgr = 1.1 mvbottom = 10.5 m/sg = 9.81 m/s²
Ttop = N
9.Work & energyMedium
35°d = 4 mμ = 0.4

A block slides from rest down a slope at 35° to the horizontal. The coefficient of kinetic friction is 0.4. Find its speed v after it has slid 4 m along the slope.

θ = 35°μ = 0.4d = 4 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
k = 1000 N/m30°μ = 0.20.5 kg

A spring of stiffness 1000 N/m at the bottom of a 30° slope is compressed by 12 cm against a 0.5 kg block and released. The coefficient of kinetic friction between block and slope is 0.2. How far d up the slope does the block travel from the release point before it stops? (Ignore the short distance over which the spring pushes, i.e. take friction and gravity over the whole distance d.)

m = 0.5 kgk = 1000 N/mx = 12 cmθ = 30°μ = 0.2g = 9.81 m/s²
d = m
11.Momentum & collisionsMedium
2 kg3 m/s0.5 kg

A 2 kg glider moving at 3 m/s makes a perfectly elastic head-on collision with a 0.5 kg glider at rest on a frictionless track. Find the velocity v′2 of the second glider after the collision.

m1 = 2 kgm2 = 0.5 kgv1 = 3 m/sv2 = 0
v′2 = m/s
12.Momentum & collisionsHard
1000 kgv1​ = ?1300 kg

A 1000 kg car runs into a parked 1300 kg car. The wrecks lock together and skid 6 m before stopping. The coefficient of kinetic friction between tyres and road is 0.5. Use g = 9.81 m/s². Find the speed v1 of the first car just before the collision.

m1 = 1000 kgm2 = 1300 kgd = 6 mμ = 0.5g = 9.81 m/s²
v1 = m/s
13.Rigid-body rotationMedium
L = 2.1 mm = 12.5 kgα

A uniform slender rod of mass 12.5 kg and length 2.1 m is pinned at one end and held horizontal. It is released from rest. Use g = 9.81 m/s². Find the acceleration atip of the free end just after release.

m = 12.5 kgL = 2.1 mg = 9.81 m/s²
atip = m/s²
14.Rigid-body rotationHard
560 m/s5 g0.67 mL = 0.8 m7 kgφ

A uniform slender rod of mass 7 kg and length 0.8 m hangs at rest from a frictionless pivot at its top end. A 5 g bullet moving horizontally at 560 m/s hits the rod 0.67 m below the pivot and stays embedded. Use g = 9.81 m/s². Find the largest angle φ from the vertical through which the rod swings.

M = 7 kgL = 0.8 mm = 5 gv = 560 m/sd = 0.67 mg = 9.81 m/s²
φ = °
15.Gears & gear trainsMedium
Tw​ = ?z = 4, 1450 rpm

A 0.55 kW motor at 1450 rpm drives a worm with 4 start(s). The worm wheel has 72 teeth and the drive has an efficiency of 60%. Find the output torque Tw on the wheel shaft.

z = 4Nw = 72n = 1450 rpmP = 0.55 kWη = 60%
Tw = N·m
16.Gears & gear trainsHard
A = 15B = 16C = 12D = 24

In a compound gear train, gear A (15 teeth) on the input shaft turning at 960 rpm drives gear B (16 teeth). Gear C (12 teeth) is fixed to the same shaft as B and drives gear D (24 teeth) on the output shaft. Find the output speed nout.

nin = 960 rpmA = 15B = 16C = 12D = 24
nout = rpm
17.Springs & pendulumsMedium
L = 1.2 m

A simple pendulum has a length of 1.2 m. Use g = 9.81 m/s². Find its period T for small swings.

L = 1.2 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
1.6 kgk = 270 N/mA = 17 cm

A 1.6 kg mass on a spring with k = 270 N/m is pulled 17 cm from equilibrium and released. Find the total energy E of the oscillation.

m = 1.6 kgk = 270 N/mA = 17 cm
E = J
19.Mechanical vibrationsMedium
tx40 mm1 cycle18.7 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 40 mm is followed one cycle later by a peak of 18.7 mm. Find the damping ratio ζ.

x0 = 40 mmx1 = 18.7 mmn = 1
ζ =
20.Mechanical vibrationsHard
k1​ = 20k2​ = 50k3​ = 25m = 50 kg

A 50 kg mass hangs from spring k₃ = 25 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 20 kN/m and k₂ = 50 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 50 kgk1 = 20 kN/mk2 = 50 kN/mk3 = 25 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: s = 16.67 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 36/3.6 = 10 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 10²/(2·3) = 16.67 m

Answer

s = 16.67 m
2.Kinematics

Answer: t = 2.026 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−10 = 5·t − ½·9.81·t²
4.905·t² − 5·t − 10 = 0

Solve the quadratic

Only the positive root is physical.

t = (5 + √(5² + 2·9.81·10))/9.81 = 2.026 s

Answer

t = 2.026 s
3.Newton’s laws

Answer: a = 3.355 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 20° − 0·cos 20°) = 9.81·(0.342 − 0) = 3.355 m/s²

Answer

a = 3.355 m/s²
4.Newton’s laws

Answer: d = 1.307 m

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Deceleration

Both forces point down the slope; the mass cancels.

a = 9.81·(sin 20° + 0.3·cos 20°) = 6.121 m/s²

Distance

d = v₀²/(2a) = 4²/(2·6.121) = 1.307 m

Answer

d = 1.307 m
5.Projectile motion

Answer: t = 2.217 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 12·cos 65° = 5.071 m/s
vy = v0·sin θ = 12·sin 65° = 10.88 m/s

Time in the air

Starting and landing at the same height: t = 2vy/g.

t = 2·10.88/9.81 = 2.217 s

Answer

t = 2.217 s
6.Projectile motion

Answer: H = 42.99 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Vertical launch speed

vy = 10·sin 50° = 7.66 m/s

Rise above the cliff

Δh = vy²/(2g) = 7.66²/(2·9.81) = 2.991 m

Height above the ground

H = 40 + 2.991 = 42.99 m

Answer

H = 42.99 m
7.Circular motion

Answer: N = 7293 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the top

Towards the centre (down) is positive.

m·g − N = m·v²/r
N = 1300·9.81 − 1300·21²/105 = 12753 − 5460 = 7293 N

Answer

N = 7293 N

The car feels lighter: the road pushes up less than its weight.

8.Circular motion

Answer: Ttop = 10.24 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Speed at the top

Kinetic energy is traded for potential energy over a height 2r.

vtop² = 10.5² − 4·9.81·1.1 = 67.09 m²/s²

Forces at the top

Tension and gravity both point down, towards the centre.

T + m·g = m·vtop²/r
T = 0.2·67.09/1.1 − 0.2·9.81 = 10.24 N

Answer

Ttop = 10.24 N
9.Work & energy

Answer: v = 4.393 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy balance along the slope

The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.

½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·4·(0.5736 − 0.4·0.8192)) = 4.393 m/s

Answer

v = 4.393 m/s
10.Work & energy

Answer: d = 2.18 m

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Spring energy

x = 12 cm = 0.12 m
½kx² = ½·1000·0.12² = 7.2 J

Energy balance along the slope

m·g = 0.5·9.81 = 4.905 N
½kx² = mg·d·(sin θ + μ·cos θ)
d = 7.2/(4.905·(0.5 + 0.2·0.866)) = 2.18 m

Answer

d = 2.18 m
11.Momentum & collisions

Answer: v′2 = 4.8 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (2 − 0.5)/(2 + 0.5)·3 = 1.8 m/s
v′2 = 2·2/(2 + 0.5)·3 = 4.8 m/s

Answer

v′2 = 4.8 m/s
12.Momentum & collisions

Answer: v1 = 17.65 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Speed after the collision

V = √(2·μ·g·d) = √(2·0.5·9.81·6) = 7.672 m/s

Momentum in the collision

m1·v1 = (m1 + m2)·V → v1 = 2300·7.672/1000 = 17.65 m/s

Answer

v1 = 17.65 m/s
(63.52 km/h)
13.Rigid-body rotation

Answer: atip = 14.71 m/s²

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Moments about the pin

At the moment of release ω = 0, so there is no centripetal acceleration and the centre accelerates straight down.

m·g·L/2 = (m·L²/3)·α → α = 3g/(2L) = 3·9.81/(2·2.1) = 7.007 rad/s²

Acceleration of the free end

atip = α·L = 7.007·2.1 = 14.71 m/s²

Answer

atip = 14.71 m/s²

atip = 1.5·g for any length: the free end falls faster than a dropped stone.

14.Rigid-body rotation

Answer: φ = 16.82 °

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Moment of inertia after the impact

I = M·L²/3 + m·d² = 7·0.8²/3 + 0.005·0.67² = 1.496 kg·m²

Angular momentum about the pivot

The pivot force passes through the pivot, so it has no moment there during the impact.

m·v·d = I·ω → ω = 0.005·560·0.67/1.496 = 1.254 rad/s

Energy during the swing

½·I·ω² = ½·1.496·1.254² = 1.177 J
(M·g·L/2 + m·g·d)·(1 − cos φ) = 27.5·(1 − cos φ)
cos φ = 1 − 1.177/27.5 = 0.9572 → φ = 16.82°

Answer

φ = 16.82°
15.Gears & gear trains

Answer: Tw = 39.12 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Wheel speed

nw = n·z/Nw = 1450·4/72 = 80.56 rpm

Output torque

ωw = 2π·80.56/60 = 8.436 rad/s
Tw = η·P/ωw = 0.6·550/8.436 = 39.12 N·m

Answer

Tw = 39.12 N·m
16.Gears & gear trains

Answer: nout = 450 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

First stage

nB = 960·15/16 = 900 rpm = nC

Second stage

nout = 900·12/24 = 450 rpm

Answer

nout = 450 rpm

total ratio = 2.133 : 1

17.Springs & pendulums

Answer: T = 2.198 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Pendulum period

T = 2π·√(1.2/9.81) = 2.198 s

Answer

T = 2.198 s
18.Springs & pendulums

Answer: E = 3.902 J

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(270/1.6) = 12.99 rad/s

Energy

E = ½·k·A² = ½·270·0.17² = 3.902 J

Answer

E = 3.902 J
19.Mechanical vibrations

Answer: ζ = 0.1201

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/1)·ln(40/18.7) = 0.7604

Damping ratio

ζ = δ/√(4π² + δ²) = 0.7604/√(39.48 + 0.5781) = 0.1201

Answer

ζ = 0.1201
20.Mechanical vibrations

Answer: fn = 3.055 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 20 + 50 = 70 kN/m
keq = 70·25/(70 + 25) = 18.42 kN/m

Natural frequency

ωn = √(18421/50) = 19.19 rad/s
fn = 19.19/(2π) = 3.055 Hz

Answer

fn = 3.055 Hz

ExamProblems · examproblems.com/courses/dynamics