In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Kinematics
Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h
Method
List what you know: v₀, v, a, t and s, with units.
Pick the equation that contains your three knowns and the unknown.
Choose one positive direction and give opposing quantities a minus sign.
Solve and check that the answer is physically sensible.
Newton’s laws
Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ
Method
Draw a free-body diagram with every force on the body.
Choose a positive direction along the motion.
Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
Apply ΣF = m·a along the motion; friction is μ·N against the motion.
Projectile motion
Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g
Method
Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
The horizontal motion has constant speed; the vertical motion has acceleration −g.
Find the time of flight from the vertical motion.
Use that time in the horizontal motion to find the range.
Circular motion
Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)
Work & energy
Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t
Momentum & collisions
Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv
Method
Choose a positive direction and give each velocity its sign.
Write the total momentum before: Σm·v.
For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
Set momentum before equal to momentum after and solve.
Rigid-body rotation
Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω
Method
Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.
Gears & gear trains
Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios
Springs & pendulums
Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²
Mechanical vibrations
Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2
2Practice problems
1.KinematicsMedium
A car driving at 100 km/h brakes with a constant deceleration of 6 m/s² until it stops. How long does braking take? Find t.
v₀ = 100 km/ha = −6 m/s²v = 0
t = s
2.KinematicsHard
A model rocket is launched straight up from rest. Its engine gives it a constant upward acceleration of 26 m/s² for 2.5 s, after which the engine stops and the rocket moves freely. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax the rocket reaches.
a = 26 m/s²t1 = 2.5 sg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
A 4 kg block slides down a slope at 30° to the horizontal. The coefficient of kinetic friction is 0.15. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.
m = 4 kgθ = 30°μ = 0.15g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
A 6 kg block on a ramp at 20° is connected by a light string over a frictionless pulley at the top of the ramp to a hanging 8 kg mass. The hanging mass moves down. The coefficient of kinetic friction between block and ramp is 0.2. Use g = 9.81 m/s². Find the tension T in the string.
m1 = 6 kgm2 = 8 kgθ = 20°μ = 0.2g = 9.81 m/s²
T = N
5.Projectile motionMedium
A ball is launched at 25° above horizontal from level ground. Ignore air resistance. Find the maximum height H the ball reaches.
v0 = 38 m/sθ = 25°g = 9.81 m/s²
H = m
6.Projectile motionHard
A ball is thrown from ground level at 35 m/s and 60° above the horizontal. It lands on the flat roof of a building 11 m high, on its way down. Ignore air resistance and use g = 9.81 m/s². Find the horizontal distance x from the launch point to where it lands.
v₀ = 35 m/sθ = 60°hroof = 11 mg = 9.81 m/s²
x = m
7.Circular motionMedium
A car takes a flat curve of radius 30 m. The coefficient of static friction between tyres and road is 0.7. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.
r = 30 mμs = 0.7g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
A 1.7 kg ball on a string 1 m long is swung in a vertical circle. At the lowest point it moves at 4.5 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.
m = 1.7 kgr = 1 mv = 4.5 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
A 0.5 kg block slides 9 m down a slope at 25° to the horizontal, with a coefficient of kinetic friction of 0.25. Find the work Wf done against friction.
m = 0.5 kgθ = 25°μ = 0.25d = 9 mg = 9.81 m/s²
Wf = J
10.Work & energyHard
A spring of stiffness 5000 N/m at the bottom of a 25° slope is compressed by 15 cm against a 0.5 kg block and released. The coefficient of kinetic friction between block and slope is 0.1. How far d up the slope does the block travel from the release point before it stops? (Ignore the short distance over which the spring pushes, i.e. take friction and gravity over the whole distance d.)
A 19 kg projectile moving horizontally at 26 m/s explodes into two fragments that move along the same line. The 1 kg fragment continues forwards at 50 m/s. Find the velocity v′2 of the 18 kg fragment (positive in the original direction).
M = 19 kgu = 26 m/sm1 = 1 kgv′1 = 50 m/sm2 = 18 kg
v′2 = m/s
12.Momentum & collisionsHard
A 0.4 kg ball hits a wall at 27 m/s and bounces straight back at 4 m/s. The contact lasts 25 ms. Find the magnitude of the impulse J the wall gives the ball.
m = 0.4 kgvin = 27 m/svout = 4 m/sΔt = 25 ms
J = N·s
13.Rigid-body rotationMedium
A flywheel with a moment of inertia of 18 kg·m² spins at 2200 rpm. A brake applies a constant friction torque of 75 N·m. How long t does it take to stop?
I = 18 kg·m²n = 2200 rpmTb = 75 N·m
t = s
14.Rigid-body rotationHard
A solid sphere starts from rest and rolls without slipping down a slope inclined at 40° to the horizontal. Use g = 9.81 m/s². Its radius is 0.15 m. Find its angular velocity ω after it has rolled 1.5 m along the slope.
θ = 40°s = 1.5 mI = (2/5)·m·r²g = 9.81 m/s²r = 0.15 m
ω = rad/s
15.Gears & gear trainsMedium
A 1.5 kW motor running at 2900 rpm drives a pinion with 20 teeth and a module of 2 mm. Find the tangential force Ft on the pinion teeth.
P = 1.5 kWn = 2900 rpmN1 = 20m = 2 mm
Ft = N
16.Gears & gear trainsHard
In a compound gear train, gear A (24 teeth) on the input shaft turning at 3000 rpm drives gear B (40 teeth). Gear C (32 teeth) is fixed to the same shaft as B and drives gear D (36 teeth) on the output shaft. Find the output speed nout.
nin = 3000 rpmA = 24B = 40C = 32D = 36
nout = rpm
17.Springs & pendulumsMedium
A simple pendulum has a length of 2.7 m. Use g = 9.81 m/s². Find its period T for small swings.
L = 2.7 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
A 0.2 kg mass on a spring with k = 80 N/m is pulled 11 cm from equilibrium and released. Find its maximum speed vmax.
m = 0.2 kgk = 80 N/mA = 11 cm
vmax = m/s
19.Mechanical vibrationsMedium
A 5 kg mass is supported by a spring with a stiffness of 4 kN/m and a viscous damper with a damping coefficient of 140 N·s/m. Find the damping ratio ζ.
m = 5 kgk = 4 kN/mc = 140 N·s/m
ζ =
20.Mechanical vibrationsHard
A 10 kg mass hangs from spring k₃ = 15 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 20 kN/m and k₂ = 20 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.
m = 10 kgk1 = 20 kN/mk2 = 20 kN/mk3 = 15 kN/m
fn = Hz
3Solutions
1.Kinematics
Answer: t = 4.63 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v₀ = 100/3.6 = 27.78 m/s
Braking time
0 = v₀ − a·t → t = v₀/a = 27.78/6 = 4.63 s
Answer
t = 4.63 s
2.Kinematics
Answer: hmax = 296.6 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Powered phase
v₁ = 26·2.5 = 65 m/s
h₁ = ½·26·2.5² = 81.25 m
Free flight up
At the top the velocity is zero.
Δh = v₁²/(2g) = 65²/(2·9.81) = 215.3 m
hmax = 81.25 + 215.3 = 296.6 m
Answer
hmax = 296.6 m
3.Newton’s laws
Answer: a = 3.631 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Forces along the string
m₂·g = 78.48 N
m₁·g·sin θ = 20.13 N
μ·m₁·g·cos θ = 11.06 N
Acceleration of the system
a = (78.48 − 20.13 − 11.06)/14 = 3.378 m/s²
Tension from the hanging mass
m2·g − T = m2·a → T = 8·(9.81 − 3.378) = 51.46 N
Answer
T = 51.46 N
5.Projectile motion
Answer: H = 13.15 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 38·cos 25° = 34.44 m/s
vy = v0·sin θ = 38·sin 25° = 16.06 m/s
Highest point
At the top the vertical velocity is zero: vy² = 2gH.
H = vy²/(2g) = 16.06²/(2·9.81) = 13.15 m
Answer
H = 13.15 m
6.Projectile motion
Answer: x = 101.4 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
vx = 17.5 m/s, vy = 30.31 m/s
Time to land on the roof
Larger root: the ball is descending.
11 = 30.31·t − 4.905·t²
t = (30.31 + √(30.31² − 2·9.81·11))/9.81 = 5.792 s
Horizontal distance
x = vx·t = 17.5·5.792 = 101.4 m
Answer
x = 101.4 m
7.Circular motion
Answer: vmax = 14.35 m/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Friction provides the centripetal force
m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.7·9.81·30) = 14.35 m/s
Answer
vmax = 14.35 m/s (51.67 km/h)
8.Circular motion
Answer: T = 51.1 N
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Forces at the lowest point
Towards the centre (up) is positive.
T − m·g = m·v²/r
T = 1.7·9.81 + 1.7·4.5²/1 = 16.68 + 34.42 = 51.1 N
Answer
T = 51.1 N
9.Work & energy
Answer: Wf = 10 J
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Friction force
N = mg·cos θ = 4.905·0.9063 = 4.445 N
F = μN = 0.25·4.445 = 1.111 N
Work against friction
Wf = F·d = 1.111·9 = 10 J
Answer
Wf = 10 J
10.Work & energy
Answer: d = 22.34 m
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Spring energy
x = 15 cm = 0.15 m
½kx² = ½·5000·0.15² = 56.25 J
Energy balance along the slope
m·g = 0.5·9.81 = 4.905 N
½kx² = mg·d·(sin θ + μ·cos θ)
d = 56.25/(4.905·(0.4226 + 0.1·0.9063)) = 22.34 m
Answer
d = 22.34 m
11.Momentum & collisions
Answer: v′2 = 24.67 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Momentum before
p = M·u = 19·26 = 494 kg·m/s
Momentum after
494 = 1·50 + 18·v′2
v′2 = (494 − 50)/18 = 24.67 m/s
Answer
v′2 = 24.67 m/s
12.Momentum & collisions
Answer: J = 12.4 N·s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Change in momentum
J = m·Δv = 0.4·(4 + 27) = 12.4 N·s
Answer
J = 12.4 N·s
13.Rigid-body rotation
Answer: t = 55.29 s
Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.
Angular velocity
ω = 2π·2200/60 = 230.4 rad/s
Deceleration and time
α = Tb/I = 75/18 = 4.167 rad/s²
t = ω/α = 230.4/4.167 = 55.29 s
Answer
t = 55.29 s
14.Rigid-body rotation
Answer: ω = 24.51 rad/s
Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.
Height dropped
h = s·sin θ = 1.5·sin 40° = 0.9642 m
Energy balance with rolling
Rolling without slipping: ω = v/r, and friction does no work at the contact point.
m·g·h = ½·m·v²·(1 + 0.4)
v = √(2·9.81·0.9642/1.4) = 3.676 m/s
ω = v/r = 3.676/0.15 = 24.51 rad/s
Answer
ω = 24.51 rad/s
15.Gears & gear trains
Answer: Ft = 247 N
Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.
Torque on the pinion
ω = 2π·2900/60 = 303.7 rad/s
T = P/ω = 1500/303.7 = 4.939 N·m
Pitch diameter
d = m·N = 2·20 = 40 mm
Tangential force
Ft = 2T/d = 2·4.939/0.04 = 247 N
Answer
Ft = 247 N
16.Gears & gear trains
Answer: nout = 1600 rpm
Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.
First stage
nB = 3000·24/40 = 1800 rpm = nC
Second stage
nout = 1800·32/36 = 1600 rpm
Answer
nout = 1600 rpm
total ratio = 1.875 : 1
17.Springs & pendulums
Answer: T = 3.296 s
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Pendulum period
T = 2π·√(2.7/9.81) = 3.296 s
Answer
T = 3.296 s
18.Springs & pendulums
Answer: vmax = 2.2 m/s
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Angular frequency
ω = √(80/0.2) = 20 rad/s
Maximum speed
vmax = A·ω = 0.11·20 = 2.2 m/s
Answer
vmax = 2.2 m/s
19.Mechanical vibrations
Answer: ζ = 0.495
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Critical damping
cc = 2·√(k·m) = 2·√(4000·5) = 282.8 N·s/m
Damping ratio
ζ = c/cc = 140/282.8 = 0.495
Answer
ζ = 0.495
ζ < 1, so the system is underdamped and oscillates as it decays.
20.Mechanical vibrations
Answer: fn = 5.257 Hz
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Equivalent stiffness
Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.