Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)1 s12.5

A driver moving at 45 km/h sees an obstacle. Her reaction time is 1 s, after which the car brakes with a constant deceleration of 5.5 m/s². Find the total stopping distance d from the moment she sees the obstacle.

v₀ = 45 km/htr = 1 sa = −5.5 m/s²
d = m
2.KinematicsHard
a = 20 m/s²

A model rocket is launched straight up from rest. Its engine gives it a constant upward acceleration of 20 m/s² for 1 s, after which the engine stops and the rocket moves freely. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax the rocket reaches.

a = 20 m/s²t1 = 1 sg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
boxv₀ = 7 m/sμ = ?

A box slides across a level floor with an initial speed of 7 m/s and comes to rest after 6.2 m. Use g = 9.81 m/s². Find the coefficient of kinetic friction μ.

v₀ = 7 m/sd = 6.2 mg = 9.81 m/s²
μ =
4.Newton’s lawsHard
10 kg7 kgTF = 105 Nμ = 0.15

Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 105 N pulls the front 7 kg block; the 10 kg block is towed behind. The coefficient of kinetic friction is 0.15 for both blocks. Use g = 9.81 m/s². Find the tension T in the connecting string.

m1 = 10 kgm2 = 7 kgF = 105 Nμ = 0.15g = 9.81 m/s²
T = N
5.Projectile motionMedium
8 my = ?v0​ = 10 m/s50°

A ball is kicked from level ground at 10 m/s and 50° above the horizontal towards a wall 8 m away. Ignore air resistance and use g = 9.81 m/s². At what height y does the ball pass the wall?

v₀ = 10 m/sθ = 50°x = 8 mg = 9.81 m/s²
y = m
6.Projectile motionHard
h = 45 mv0​ = 27 m/s50°v = ?

A ball is launched at 27 m/s and 50° above the horizontal from the top of a 45 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the speed v with which it hits the ground.

v₀ = 27 m/sθ = 50°h = 45 mg = 9.81 m/s²
v = m/s
7.Circular motionMedium
r = 100 mvmax​ = ?

A car takes a flat curve of radius 100 m. The coefficient of static friction between tyres and road is 0.7. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 100 mμs = 0.7g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
r = 0.8 mv = 5 m/s

A 1.2 kg ball on a string 0.8 m long is swung in a vertical circle. At the lowest point it moves at 5 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.

m = 1.2 kgr = 0.8 mv = 5 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
30 km/h

A car travelling at 30 km/h on a level road brakes hard and skids to a stop with its wheels locked. The coefficient of kinetic friction between the tyres and the road is 0.5. Find the stopping distance d.

v = 30 km/hμ = 0.5g = 9.81 m/s²
d = m
10.Work & energyHard
h = 3 mL = 3 mμ = 0.1k = 4000 N/m

A 2 kg block is released from rest at height 3 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 3 m long (μ = 0.1) and then runs onto a spring (k = 4000 N/m) on a smooth surface. Find the speed v of the block when it reaches the spring.

m = 2 kgh = 3 mL = 3 mμ = 0.1k = 4000 N/mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
2.5 kgv = ?20 gh = 20 cm

A 20 g bullet is fired horizontally into a 2.5 kg wooden block hanging on light strings, and stays inside it. The block swings up until it is 20 cm higher than at the start. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 20 gM = 2.5 kgh = 20 cmg = 9.81 m/s²
v = m/s
12.Momentum & collisionsHard
1 kgv = ?10 g35°L = 0.5 m

A 10 g bullet is fired horizontally into a 1 kg block hanging from light strings 0.5 m long, and stays in it. The strings swing out to a largest angle of 35° from the vertical. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 10 gM = 1 kgL = 0.5 mθ = 35°g = 9.81 m/s²
v = m/s
13.Rigid-body rotationMedium
n = 2000 rpmTb​ = 15 N·mI = 25.5 kg·m²

A flywheel with a moment of inertia of 25.5 kg·m² spins at 2000 rpm. A brake applies a constant friction torque of 15 N·m. How many revolutions N does the flywheel make before it stops?

I = 25.5 kg·m²n = 2000 rpmTb = 15 N·m
N = rev
14.Rigid-body rotationHard
0.6 m0.25 mn1​ = 35 rpm

A person stands on a frictionless turntable and holds a 1 kg dumbbell in each hand, 0.6 m from the axis. The person and turntable alone have a moment of inertia of 5 kg·m² about the axis. They turn at 35 rpm, then pull the dumbbells in to 0.25 m from the axis. Treat the dumbbells as point masses. Find the new speed n2 in rpm.

I0 = 5 kg·m²m = 2 × 1 kgr1 = 0.6 mr2 = 0.25 mn1 = 35 rpm
n2 = rpm
15.Gears & gear trainsMedium
N1​ = 15N2​ = 36

A 1.5 kW motor running at 960 rpm drives a pinion with 15 teeth, which meshes with a gear with 36 teeth. The gear pair has an efficiency of 97%. Find the output torque T2 on the gear shaft.

P = 1.5 kWn1 = 960 rpmN1 = 15N2 = 36η = 97%
T2 = N·m
16.Gears & gear trainsHard
A = 12B = 18C = 18D = 32

In a compound gear train, gear A (12 teeth) on the input shaft turning at 2900 rpm drives gear B (18 teeth). Gear C (18 teeth) is fixed to the same shaft as B and drives gear D (32 teeth) on the output shaft. Find the output speed nout.

nin = 2900 rpmA = 12B = 18C = 18D = 32
nout = rpm
17.Springs & pendulumsMedium
t (s)x (cm)0.6 s

A 2 kg mass on a spring with k = 270 N/m is pulled 14 cm in the positive direction and released from rest at t = 0. Find its velocity v at t = 0.6 s (with sign).

m = 2 kgk = 270 N/mA = 14 cmt = 0.6 s
v = m/s
18.Springs & pendulumsHard
mk = 160 N/mA = 19 cmx = 15 cm

A mass on a spring with k = 160 N/m oscillates on a frictionless surface with an amplitude of 19 cm. Find the energy U stored in the spring when the mass is 15 cm from equilibrium.

k = 160 N/mA = 19 cmx = 15 cm
U = J
19.Mechanical vibrationsMedium
tx12 mm1 cycle4.6 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 12 mm is followed one cycle later by a peak of 4.6 mm. Find the damping ratio ζ.

x0 = 12 mmx1 = 4.6 mmn = 1
ζ =
20.Mechanical vibrationsHard
k1​ = 30k2​ = 30k3​ = 25m = 50 kg

A 50 kg mass hangs from spring k₃ = 25 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 30 kN/m and k₂ = 30 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 50 kgk1 = 30 kN/mk2 = 30 kN/mk3 = 25 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: d = 26.7 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 45/3.6 = 12.5 m/s

Reaction distance

d1 = v₀·tr = 12.5·1 = 12.5 m

Braking distance

d2 = v₀²/(2a) = 12.5²/(2·5.5) = 14.2 m

Total

d = 12.5 + 14.2 = 26.7 m

Answer

d = 26.7 m
2.Kinematics

Answer: hmax = 30.39 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Powered phase

v₁ = 20·1 = 20 m/s
h₁ = ½·20·1² = 10 m

Free flight up

At the top the velocity is zero.

Δh = v₁²/(2g) = 20²/(2·9.81) = 20.39 m
hmax = 10 + 20.39 = 30.39 m

Answer

hmax = 30.39 m
3.Newton’s laws

Answer: μ = 0.4028

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Deceleration

a = v₀²/(2d) = 7²/(2·6.2) = 3.952 m/s²

Friction coefficient

μ·m·g = m·a → μ = a/g = 3.952/9.81 = 0.4028

Answer

μ = 0.4028
4.Newton’s laws

Answer: T = 61.76 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Whole system

a = (F − μ·(m1 + m2)·g)/(m1 + m2) = (105 − 25.02)/17 = 4.705 m/s²

Rear block alone

T = m1·(a + μ·g) = 10·(4.705 + 1.472) = 61.76 N

Answer

T = 61.76 N

With the same μ on both blocks, friction drops out: T = F·m₁/(m₁ + m₂).

5.Projectile motion

Answer: y = 1.936 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Time to the wall

vx = 10·cos 50° = 6.428 m/s
t = x/vx = 8/6.428 = 1.245 s

Height at that time

y = 7.66·1.245 − ½·9.81·1.245² = 1.936 m

Answer

y = 1.936 m

The ball is already on its way down at the wall.

6.Projectile motion

Answer: v = 40.15 m/s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

vx = 27·cos 50° = 17.36 m/s
vy0 = 27·sin 50° = 20.68 m/s

Vertical speed at impact

Energy or v² = v₀² + 2as in the vertical direction.

vy = √(20.68² + 2·9.81·45) = 36.2 m/s

Impact speed

v = √(17.36² + 36.2²) = 40.15 m/s

Answer

v = 40.15 m/s

Check with energy: v² = v₀² + 2gh.

7.Circular motion

Answer: vmax = 26.2 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.7·9.81·100) = 26.2 m/s

Answer

vmax = 26.2 m/s (94.34 km/h)
8.Circular motion

Answer: T = 49.27 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the lowest point

Towards the centre (up) is positive.

T − m·g = m·v²/r
T = 1.2·9.81 + 1.2·5²/0.8 = 11.77 + 37.5 = 49.27 N

Answer

T = 49.27 N
9.Work & energy

Answer: d = 7.079 m

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Speed in base units

v = 30/3.6 = 8.333 m/s

Energy balance

½mv² = μmg·d → d = v²/(2μg) = 8.333²/(2·0.5·9.81) = 7.079 m

Answer

d = 7.079 m

Doubling the speed makes the stopping distance four times longer.

10.Work & energy

Answer: v = 7.278 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 19.62·(3 − 0.1·3) = 52.97 J

Speed at the spring

½mv² = mg(h − μL) → v = √(2g(h − μL)) = √(2·9.81·2.7) = 7.278 m/s

Answer

v = 7.278 m/s
11.Momentum & collisions

Answer: v = 249.6 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Swing after impact

V = √(2·g·h) = √(2·9.81·0.2) = 1.981 m/s

Collision

m·v = (m + M)·V → v = (0.02 + 2.5)·1.981/0.02 = 249.6 m/s

Answer

v = 249.6 m/s
12.Momentum & collisions

Answer: v = 134.5 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Rise of the block

h = L·(1 − cos θ) = 0.5·(1 − cos 35°) = 0.09042 m

Speed after impact

V = √(2·9.81·0.09042) = 1.332 m/s

Collision

v = (m + M)·V/m = 1.01·1.332/0.01 = 134.5 m/s

Answer

v = 134.5 m/s
13.Rigid-body rotation

Answer: N = 5934 rev

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·2000/60 = 209.4 rad/s

Work of the brake equals the kinetic energy

½·I·ω² = ½·25.5·209.4² = 559278 J
θ = 559278/15 = 37285 rad

Revolutions

N = θ/2π = 5934 rev

Answer

N = 5934 rev
14.Rigid-body rotation

Answer: n2 = 39.06 rpm

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Moments of inertia

I1 = 5 + 2·1·0.6² = 5.72 kg·m²
I2 = 5 + 2·1·0.25² = 5.125 kg·m²

Conservation of angular momentum

n2 = n1·I1/I2 = 35·5.72/5.125 = 39.06 rpm

Answer

n2 = 39.06 rpm

The kinetic energy increases: the extra energy comes from the work the person does pulling the dumbbells in.

15.Gears & gear trains

Answer: T2 = 34.74 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·960/60 = 100.5 rad/s
T1 = P/ω₁ = 1500/100.5 = 14.92 N·m

Output torque

T2 = 14.92·36/15·0.97 = 34.74 N·m

Answer

T2 = 34.74 N·m
16.Gears & gear trains

Answer: nout = 1088 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

First stage

nB = 2900·12/18 = 1933 rpm = nC

Second stage

nout = 1933·18/32 = 1088 rpm

Answer

nout = 1088 rpm

total ratio = 2.667 : 1

17.Springs & pendulums

Answer: v = −1.033 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(270/2) = 11.62 rad/s
ω·t = 11.62·0.6 = 6.971 rad

Velocity

v = −A·ω·sin(ω·t) = −0.14·11.62·sin(6.971) = −1.033 m/s

Answer

v = −1.033 m/s
18.Springs & pendulums

Answer: U = 1.8 J

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Total energy

E = ½·k·A² = ½·160·0.19² = 2.888 J

Spring energy at x

U = ½·k·x² = ½·160·0.15² = 1.8 J

Answer

U = 1.8 J
19.Mechanical vibrations

Answer: ζ = 0.1509

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/1)·ln(12/4.6) = 0.9589

Damping ratio

ζ = δ/√(4π² + δ²) = 0.9589/√(39.48 + 0.9194) = 0.1509

Answer

ζ = 0.1509
20.Mechanical vibrations

Answer: fn = 2.99 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 30 + 30 = 60 kN/m
keq = 60·25/(60 + 25) = 17.65 kN/m

Natural frequency

ωn = √(17647/50) = 18.79 rad/s
fn = 18.79/(2π) = 2.99 Hz

Answer

fn = 2.99 Hz

ExamProblems · examproblems.com/courses/dynamics