Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
a = 2.5 m/s²s = 1900 m

A plane starts from rest and accelerates uniformly at 2.5 m/s² along a runway. Find its speed v after 1900 m.

v₀ = 0a = 2.5 m/s²s = 1900 m
v = m/s
2.KinematicsHard
v₀ = 12 m/s25 m

A ball is thrown straight up at 12 m/s from the edge of a roof 25 m above the ground. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax above the ground.

v₀ = 12 m/sh₀ = 25 mg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
θ = 45°a = ?m = 5 kg

A 5 kg block slides down a slope at 45° to the horizontal. The coefficient of kinetic friction is 0.2. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 5 kgθ = 45°μ = 0.2g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
θ = 30°blockv₀ = 9.5 m/s

A block is given a push so that it starts sliding up a ramp at 30° with a speed of 9.5 m/s. The coefficient of kinetic friction is 0.15. Use g = 9.81 m/s². How far d along the ramp does it slide before it stops?

v₀ = 9.5 m/sθ = 30°μ = 0.15g = 9.81 m/s²
d = m
5.Projectile motionMedium
v0​ = 38 m/s45°rangeH = ?

A ball is launched at 45° above horizontal from level ground. Ignore air resistance. Find the maximum height H the ball reaches.

v0 = 38 m/sθ = 45°g = 9.81 m/s²
H = m
6.Projectile motionHard
h = 45 mv0​ = 35 m/s25°x = ?

A ball is launched at 25° above horizontal from the top of a 45 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 35 m/sθ = 25°h = 45 mg = 9.81 m/s²
x = m
7.Circular motionMedium
r = 130 mvmax​ = ?

A car takes a flat curve of radius 130 m. The coefficient of static friction between tyres and road is 0.7. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 130 mμs = 0.7g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
r = 1.1 mv = 4 m/s

A 0.6 kg ball on a string 1.1 m long is swung in a vertical circle. At the lowest point it moves at 4 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.

m = 0.6 kgr = 1.1 mv = 4 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
40°L = 3 m10 kg

A 10 kg ball hangs on a light string of length 3 m. It is pulled aside until the string makes 40° with the vertical and released from rest. Find the tension T in the string when the ball passes the lowest point.

m = 10 kgL = 3 mθ = 40°g = 9.81 m/s²
T = N
10.Work & energyHard
h = 2.5 mL = 3.5 mμ = 0.15k = 500 N/m

A 10 kg block is released from rest at height 2.5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 3.5 m long (μ = 0.15) and then runs onto a spring (k = 500 N/m) on a smooth surface. Find the speed v of the block when it reaches the spring.

m = 10 kgh = 2.5 mL = 3.5 mμ = 0.15k = 500 N/mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
4.5 kg5 m/s4 kg

A 4.5 kg glider moving at 5 m/s makes a perfectly elastic head-on collision with a 4 kg glider at rest on a frictionless track. Find the velocity v′2 of the second glider after the collision.

m1 = 4.5 kgm2 = 4 kgv1 = 5 m/sv2 = 0
v′2 = m/s
12.Momentum & collisionsHard
1800 kg20 m/s800 kg23 m/sθ = ?

At a crossing a 1800 kg car travelling east at 20 m/s collides with an 800 kg car travelling north at 23 m/s. The cars lock together. Find the direction θ of the wreck just after the collision, measured north of east.

m1 = 1800 kgv1 = 20 m/s (E)m2 = 800 kgv2 = 23 m/s (N)
θ = °
13.Rigid-body rotationMedium
v = ?2.5 kgL = 1.4 mm = 8.5 kg

A uniform slender rod of mass 8.5 kg and length 1.4 m is pinned at one end and released from rest in a horizontal position. A small ball of mass 2.5 kg is fixed to its free end. Ignore friction and use g = 9.81 m/s². Find the speed v of the free end as the rod swings through the vertical position.

m = 8.5 kgL = 1.4 mmball = 2.5 kgg = 9.81 m/s²
v = m/s
14.Rigid-body rotationHard
θ = 15°vs = 1.5 m

A solid cylinder starts from rest and rolls without slipping down a slope inclined at 15° to the horizontal. Use g = 9.81 m/s². Its radius is 0.05 m. Find its angular velocity ω after it has rolled 1.5 m along the slope.

θ = 15°s = 1.5 mI = ½·m·r²g = 9.81 m/s²r = 0.05 m
ω = rad/s
15.Gears & gear trainsMedium
d1​ = 160 mmd2​ = 450 mm2880 rpmn2​ = ?

A 160 mm pulley at 2880 rpm drives a 450 mm pulley by a belt with 3 % slip. Find the speed n2 of the driven pulley.

n1 = 2880 rpmd1 = 160 mmd2 = 450 mms = 3 %
n2 = rpm
16.Gears & gear trainsHard
A = 15B = 48C = 48D = ?

In a compound gear train, gear A (15 teeth) on the input shaft turns at 2880 rpm and drives gear B (48 teeth). Gear C (48 teeth) is fixed to the same shaft as B and drives gear D on the output shaft. The output must turn at 540 rpm. How many teeth ND must gear D have?

nin = 2880 rpmA = 15B = 48C = 48nout = 540 rpm
ND =
17.Springs & pendulumsMedium
L = 1.2 mT = 2.06 s

An astronaut on another planet finds that a simple pendulum 1.2 m long has a period of 2.06 s for small swings. Find the gravitational acceleration g on that planet.

L = 1.2 mT = 2.06 s
g = m/s²
18.Springs & pendulumsHard
3.1 kgk = 90 N/mA = 10 cm

A 3.1 kg mass on a spring with k = 90 N/m is pulled 10 cm from equilibrium and released. Find its maximum speed vmax.

m = 3.1 kgk = 90 N/mA = 10 cm
vmax = m/s
19.Mechanical vibrationsMedium
k = 100 kN/mζ = 0.45m = 100 kg

A 100 kg mass on a spring with a stiffness of 100 kN/m has a viscous damper giving a damping ratio of 0.45. Find the damped natural frequency fd of its free vibration in Hz.

m = 100 kgk = 100 kN/mζ = 0.45
fd = Hz
20.Mechanical vibrationsHard
k1​ = 20k2​ = 15k3​ = 15m = 50 kg

A 50 kg mass hangs from spring k₃ = 15 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 20 kN/m and k₂ = 15 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 50 kgk1 = 20 kN/mk2 = 15 kN/mk3 = 15 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: v = 97.47 m/s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Speed after the distance

v = √(2·a·s) = √(2·2.5·1900) = 97.47 m/s

Answer

v = 97.47 m/s
(350.9 km/h)
2.Kinematics

Answer: hmax = 32.34 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Rise above the roof

0 = v₀² − 2·g·Δh → Δh = 12²/(2·9.81) = 7.339 m

Height above the ground

hmax = 25 + 7.339 = 32.34 m

Answer

hmax = 32.34 m
3.Newton’s laws

Answer: a = 5.549 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 45° − 0.2·cos 45°) = 9.81·(0.7071 − 0.1414) = 5.549 m/s²

Answer

a = 5.549 m/s²
4.Newton’s laws

Answer: d = 7.303 m

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Deceleration

Both forces point down the slope; the mass cancels.

a = 9.81·(sin 30° + 0.15·cos 30°) = 6.179 m/s²

Distance

d = v₀²/(2a) = 9.5²/(2·6.179) = 7.303 m

Answer

d = 7.303 m
5.Projectile motion

Answer: H = 36.8 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 38·cos 45° = 26.87 m/s
vy = v0·sin θ = 38·sin 45° = 26.87 m/s

Highest point

At the top the vertical velocity is zero: vy² = 2gH.

H = vy²/(2g) = 26.87²/(2·9.81) = 36.8 m

Answer

H = 36.8 m
6.Projectile motion

Answer: x = 155.2 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 35·cos 25° = 31.72 m/s
vy = v0·sin θ = 35·sin 25° = 14.79 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 45 + 14.79·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (14.79 + √(218.8 + 882.9))/9.81 = 4.891 s

Horizontal distance

x = vx·t = 31.72·4.891 = 155.2 m

Answer

x = 155.2 m
7.Circular motion

Answer: vmax = 29.88 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.7·9.81·130) = 29.88 m/s

Answer

vmax = 29.88 m/s (107.6 km/h)
8.Circular motion

Answer: T = 14.61 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the lowest point

Towards the centre (up) is positive.

T − m·g = m·v²/r
T = 0.6·9.81 + 0.6·4²/1.1 = 5.886 + 8.727 = 14.61 N

Answer

T = 14.61 N
9.Work & energy

Answer: T = 144 N

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.

Speed at the bottom

v² = 2gL(1 − cos θ) = 2·9.81·3·(1 − cos 40°) = 13.77 m²/s²

Forces at the bottom

m·g = 10·9.81 = 98.1 N
T = mg + mv²/L = 98.1 + 10·13.77/3 = 144 N

Answer

T = 144 N

Check: T = mg(3 − 2cos θ) = 144 N.

10.Work & energy

Answer: v = 6.225 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 98.1·(2.5 − 0.15·3.5) = 193.7 J

Speed at the spring

½mv² = mg(h − μL) → v = √(2g(h − μL)) = √(2·9.81·1.975) = 6.225 m/s

Answer

v = 6.225 m/s
11.Momentum & collisions

Answer: v′2 = 5.294 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (4.5 − 4)/(4.5 + 4)·5 = 0.2941 m/s
v′2 = 2·4.5/(4.5 + 4)·5 = 5.294 m/s

Answer

v′2 = 5.294 m/s
12.Momentum & collisions

Answer: θ = 27.07 °

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum components

px = 1800·20 = 36000 kg·m/s
py = 800·23 = 18400 kg·m/s

Direction

tan θ = py/px = 0.5111 → θ = 27.07°

Answer

θ = 27.07°
13.Rigid-body rotation

Answer: v = 5.896 m/s

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Loss of potential energy

m·g·L/2 + mball·g·L = 8.5·9.81·0.7 + 2.5·9.81·1.4 = 92.7 J

Moment of inertia about the pin

IO = m·L²/3 + mball·L² = 5.553 + 4.9 = 10.45 kg·m²

Energy balance

½·IO·ω² = 92.7 → ω = √(2·92.7/10.45) = 4.212 rad/s
v = ω·L = 4.212·1.4 = 5.896 m/s

Answer

v = 5.896 m/s
14.Rigid-body rotation

Answer: ω = 45.07 rad/s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Height dropped

h = s·sin θ = 1.5·sin 15° = 0.3882 m

Energy balance with rolling

Rolling without slipping: ω = v/r, and friction does no work at the contact point.

m·g·h = ½·m·v²·(1 + 0.5)
v = √(2·9.81·0.3882/1.5) = 2.253 m/s
ω = v/r = 2.253/0.05 = 45.07 rad/s

Answer

ω = 45.07 rad/s
15.Gears & gear trains

Answer: n2 = 993.3 rpm

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Speed without slip

2880·160/450 = 1024 rpm

With slip

n2 = 1024·0.97 = 993.3 rpm

Answer

n2 = 993.3 rpm
16.Gears & gear trains

Answer: ND = 80

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Intermediate shaft speed

nB = nC = 2880·15/48 = 900 rpm

Teeth on gear D

ND = C·nC/nout = 48·900/540 = 80

Answer

ND = 80
17.Springs & pendulums

Answer: g = 11.16 m/s²

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Solve for g

g = 4π²·L/T² = 4π²·1.2/2.06² = 11.16 m/s²

Answer

g = 11.16 m/s²
18.Springs & pendulums

Answer: vmax = 0.5388 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(90/3.1) = 5.388 rad/s

Maximum speed

vmax = A·ω = 0.1·5.388 = 0.5388 m/s

Answer

vmax = 0.5388 m/s
19.Mechanical vibrations

Answer: fd = 4.495 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(100000/100) = 31.62 rad/s
fn = 31.62/(2π) = 5.033 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 5.033·√(1 − 0.45²) = 4.495 Hz

Answer

fd = 4.495 Hz
20.Mechanical vibrations

Answer: fn = 2.306 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 20 + 15 = 35 kN/m
keq = 35·15/(35 + 15) = 10.5 kN/m

Natural frequency

ωn = √(10500/50) = 14.49 rad/s
fn = 14.49/(2π) = 2.306 Hz

Answer

fn = 2.306 Hz

ExamProblems · examproblems.com/courses/dynamics