In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Kinematics
Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h
Method
List what you know: v₀, v, a, t and s, with units.
Pick the equation that contains your three knowns and the unknown.
Choose one positive direction and give opposing quantities a minus sign.
Solve and check that the answer is physically sensible.
Newton’s laws
Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ
Method
Draw a free-body diagram with every force on the body.
Choose a positive direction along the motion.
Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
Apply ΣF = m·a along the motion; friction is μ·N against the motion.
Projectile motion
Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g
Method
Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
The horizontal motion has constant speed; the vertical motion has acceleration −g.
Find the time of flight from the vertical motion.
Use that time in the horizontal motion to find the range.
Circular motion
Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)
Work & energy
Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t
Momentum & collisions
Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv
Method
Choose a positive direction and give each velocity its sign.
Write the total momentum before: Σm·v.
For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
Set momentum before equal to momentum after and solve.
Rigid-body rotation
Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω
Method
Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.
Gears & gear trains
Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios
Springs & pendulums
Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²
Mechanical vibrations
Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2
2Practice problems
1.KinematicsMedium
A plane needs a speed of 200 km/h to take off and the usable runway is 2000 m long. Starting from rest, what constant acceleration a does it need?
v₀ = 0v = 200 km/hs = 2000 m
a = m/s²
2.KinematicsHard
A ball is thrown straight up at 10 m/s from the edge of a roof 5 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.
v₀ = 10 m/sh₀ = 5 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
A 19 kg block slides down a slope at 35° to the horizontal. The coefficient of kinetic friction is 0.25. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.
m = 19 kgθ = 35°μ = 0.25g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 25 N pulls the front 6 kg block; the 1 kg block is towed behind. The coefficient of kinetic friction is 0.15 for both blocks. Use g = 9.81 m/s². Find the acceleration a of the blocks.
m1 = 1 kgm2 = 6 kgF = 25 Nμ = 0.15g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
A ball is launched from level ground at 38 m/s and must land 100 m away. Ignore air resistance and use g = 9.81 m/s². Find the smaller of the two possible launch angles θ.
v₀ = 38 m/sR = 100 mg = 9.81 m/s²
θ = °
6.Projectile motionHard
A ball is launched at 50° above horizontal from the top of a 10 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.
v0 = 14 m/sθ = 50°h = 10 mg = 9.81 m/s²
t = s
7.Circular motionMedium
A curve of radius 220 m is banked at 10°. At what speed v can a car take it with no friction needed at all? Use g = 9.81 m/s².
r = 220 mθ = 10°g = 9.81 m/s²
v = m/s
8.Circular motionHard
A 0.3 kg ball on a string 1.1 m long is swung in a vertical circle. At the lowest point it moves at 4.5 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.
m = 0.3 kgr = 1.1 mv = 4.5 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
A block slides from rest down a slope at 20° to the horizontal. The coefficient of kinetic friction is 0.1. Find its speed v after it has slid 7 m along the slope.
θ = 20°μ = 0.1d = 7 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
A 20 kg block starts from rest at the bottom of a 15° slope and is pulled up the slope by a constant force of 115 N parallel to the slope. The coefficient of kinetic friction is 0.15. Find the speed v of the block after it has moved 9 m up the slope.
A 0.5 kg glider moving at 8 m/s makes a perfectly elastic head-on collision with a 4 kg glider at rest on a frictionless track. Find the velocity v′2 of the second glider after the collision.
m1 = 0.5 kgm2 = 4 kgv1 = 8 m/sv2 = 0
v′2 = m/s
12.Momentum & collisionsHard
A 0.4 kg ball hits a wall at 10 m/s and bounces straight back at 13 m/s. The contact lasts 20 ms. Find the magnitude of the impulse J the wall gives the ball.
m = 0.4 kgvin = 10 m/svout = 13 m/sΔt = 20 ms
J = N·s
13.Rigid-body rotationMedium
A flywheel with a moment of inertia of 17 kg·m² spins at 500 rpm. A brake applies a constant friction torque of 95 N·m. How long t does it take to stop?
I = 17 kg·m²n = 500 rpmTb = 95 N·m
t = s
14.Rigid-body rotationHard
A person stands on a frictionless turntable and holds a 3.5 kg dumbbell in each hand, 0.8 m from the axis. The person and turntable alone have a moment of inertia of 5 kg·m² about the axis. They turn at 25 rpm, then pull the dumbbells in to 0.2 m from the axis. Treat the dumbbells as point masses. Find the new speed n2 in rpm.
A 0.75 kW motor running at 2900 rpm drives a pinion with 18 teeth, which meshes with a gear with 20 teeth. The gear pair has an efficiency of 95%. Find the output torque T2 on the gear shaft.
P = 0.75 kWn1 = 2900 rpmN1 = 18N2 = 20η = 95%
T2 = N·m
16.Gears & gear trainsHard
In a planetary gear set the sun gear has 24 teeth and each planet gear has 12 teeth. The ring gear is held fixed and the sun is driven at 1500 rpm. Find the speed nc of the planet carrier.
Ns = 24Np = 12ns = 1500 rpm
nc = rpm
17.Springs & pendulumsMedium
A simple pendulum has a length of 2.5 m. Use g = 9.81 m/s². Find its period T for small swings.
L = 2.5 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
A 1.9 kg mass is attached to the lower end of an unstretched vertical spring with k = 490 N/m and released from rest. Use g = 9.81 m/s². Find the greatest extension xmax of the spring in cm.
m = 1.9 kgk = 490 N/mg = 9.81 m/s²
xmax = cm
19.Mechanical vibrationsMedium
A 2 kg mass on a spring with a stiffness of 100 kN/m has a viscous damper giving a damping ratio of 0.35. Find the damped natural frequency fd of its free vibration in Hz.
m = 2 kgk = 100 kN/mζ = 0.35
fd = Hz
20.Mechanical vibrationsHard
A 100 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 25 kN/m and the lower one k₂ = 60 kN/m. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.
m = 100 kgk1 = 25 kN/mk2 = 60 kN/m
fn = Hz
3Solutions
1.Kinematics
Answer: a = 0.7716 m/s²
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v = 200/3.6 = 55.56 m/s
Acceleration
a = v²/(2s) = 55.56²/(2·2000) = 0.7716 m/s²
Answer
a = 0.7716 m/s²
2.Kinematics
Answer: t = 2.454 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equation of motion
Up is positive and the ground is h₀ below the starting point.
−5 = 10·t − ½·9.81·t²
4.905·t² − 10·t − 5 = 0
Solve the quadratic
Only the positive root is physical.
t = (10 + √(10² + 2·9.81·5))/9.81 = 2.454 s
Answer
t = 2.454 s
3.Newton’s laws
Answer: a = 3.618 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Range formula
R = v₀²·sin 2θ/g → sin 2θ = 9.81·100/38² = 0.6794
Angle
2θ = 42.79° → θ = 21.4°
Answer
θ = 21.4°
The other solution is 90° − θ = 68.6°.
6.Projectile motion
Answer: t = 2.892 s
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 14·cos 50° = 8.999 m/s
vy = v0·sin θ = 14·sin 50° = 10.72 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 10 + 10.72·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (10.72 + √(115 + 196.2))/9.81 = 2.892 s
Answer
t = 2.892 s
7.Circular motion
Answer: v = 19.51 m/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
v = √(r·g·tan θ) = √(220·9.81·tan 10°) = 19.51 m/s
Answer
v = 19.51 m/s
(70.23 km/h)
8.Circular motion
Answer: T = 8.466 N
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Forces at the lowest point
Towards the centre (up) is positive.
T − m·g = m·v²/r
T = 0.3·9.81 + 0.3·4.5²/1.1 = 2.943 + 5.523 = 8.466 N
Answer
T = 8.466 N
9.Work & energy
Answer: v = 5.837 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy balance along the slope
The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.
½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·7·(0.342 − 0.1·0.9397)) = 5.837 m/s
Answer
v = 5.837 m/s
10.Work & energy
Answer: v = 5.676 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Forces along the slope
m·g = 20·9.81 = 196.2 N
mg·sin θ = 50.78 N
μ·mg·cos θ = 28.43 N
Work–energy
½mv² = (115 − 79.21)·9 = 322.1 J
v = √(2·322.1/20) = 5.676 m/s
Answer
v = 5.676 m/s
11.Momentum & collisions
Answer: v′2 = 1.778 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Elastic collision with a target at rest
Solving momentum and energy conservation together gives these two results.
v′1 = (0.5 − 4)/(0.5 + 4)·8 = −6.222 m/s
v′2 = 2·0.5/(0.5 + 4)·8 = 1.778 m/s
Answer
v′2 = 1.778 m/s
12.Momentum & collisions
Answer: J = 9.2 N·s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Change in momentum
J = m·Δv = 0.4·(13 + 10) = 9.2 N·s
Answer
J = 9.2 N·s
13.Rigid-body rotation
Answer: t = 9.37 s
Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.
Angular velocity
ω = 2π·500/60 = 52.36 rad/s
Deceleration and time
α = Tb/I = 95/17 = 5.588 rad/s²
t = ω/α = 52.36/5.588 = 9.37 s
Answer
t = 9.37 s
14.Rigid-body rotation
Answer: n2 = 44.89 rpm
Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.
Moments of inertia
I1 = 5 + 2·3.5·0.8² = 9.48 kg·m²
I2 = 5 + 2·3.5·0.2² = 5.28 kg·m²
Conservation of angular momentum
n2 = n1·I1/I2 = 25·9.48/5.28 = 44.89 rpm
Answer
n2 = 44.89 rpm
The kinetic energy increases: the extra energy comes from the work the person does pulling the dumbbells in.
15.Gears & gear trains
Answer: T2 = 2.607 N·m
Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.
Motor torque
ω₁ = 2π·2900/60 = 303.7 rad/s
T1 = P/ω₁ = 750/303.7 = 2.47 N·m
Output torque
T2 = 2.47·20/18·0.95 = 2.607 N·m
Answer
T2 = 2.607 N·m
16.Gears & gear trains
Answer: nc = 500 rpm
Planetary gear sets: the speeds of sun, ring and carrier are linked by the Willis equation (ns − nc)/(nr − nc) = −Nr/Ns: seen from the carrier, the set is an ordinary train with the planets as idlers. Holding one member fixed turns the set into a single-ratio reducer.
Ring gear teeth
Nr = Ns + 2·Np = 24 + 2·12 = 48
Willis equation with the ring fixed
Set nr = 0 and solve for the carrier speed.
(1500 − nc)/(0 − nc) = −48/24
nc = ns·Ns/(Ns + Nr) = 1500·24/72 = 500 rpm
Answer
nc = 500 rpm
The carrier turns in the same direction as the sun.
17.Springs & pendulums
Answer: T = 3.172 s
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Pendulum period
T = 2π·√(2.5/9.81) = 3.172 s
Answer
T = 3.172 s
18.Springs & pendulums
Answer: xmax = 7.608 cm
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Equilibrium and amplitude
x₀ = m·g/k = 1.9·9.81/490 = 0.03804 m = A
Lowest point
xmax = 2A = 0.07608 m = 7.608 cm
Answer
xmax = 7.608 cm
19.Mechanical vibrations
Answer: fd = 33.34 Hz
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Undamped natural frequency
ωn = √(100000/2) = 223.6 rad/s
fn = 223.6/(2π) = 35.59 Hz
Damped natural frequency
fd = fn·√(1 − ζ²) = 35.59·√(1 − 0.35²) = 33.34 Hz
Answer
fd = 33.34 Hz
20.Mechanical vibrations
Answer: fn = 2.114 Hz
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Equivalent stiffness
Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.