Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)t = ?25

A car driving at 90 km/h brakes with a constant deceleration of 5 m/s² until it stops. How long does braking take? Find t.

v₀ = 90 km/ha = −5 m/s²v = 0
t = s
2.KinematicsHard
v₀ = 17 m/s5 m

A ball is thrown straight up at 17 m/s from the edge of a roof 5 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 17 m/sh₀ = 5 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
boxv₀ = 8 m/sμ = ?

A box slides across a level floor with an initial speed of 8 m/s and comes to rest after 13 m. Use g = 9.81 m/s². Find the coefficient of kinetic friction μ.

v₀ = 8 m/sd = 13 mg = 9.81 m/s²
μ =
4.Newton’s lawsHard
m1​ = 5 kg5 kgμ = 0.3

A 5 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 5 kg mass. The coefficient of kinetic friction between block and table is 0.3. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 5 kgm2 = 5 kgμ = 0.3g = 9.81 m/s²
T = N
5.Projectile motionMedium
7 my = ?v0​ = 12 m/s70°

A ball is kicked from level ground at 12 m/s and 70° above the horizontal towards a wall 7 m away. Ignore air resistance and use g = 9.81 m/s². At what height y does the ball pass the wall?

v₀ = 12 m/sθ = 70°x = 7 mg = 9.81 m/s²
y = m
6.Projectile motionHard
15 mv0​ = 29 m/s65°x = ?

A ball is thrown from ground level at 29 m/s and 65° above the horizontal. It lands on the flat roof of a building 15 m high, on its way down. Ignore air resistance and use g = 9.81 m/s². Find the horizontal distance x from the launch point to where it lands.

v₀ = 29 m/sθ = 65°hroof = 15 mg = 9.81 m/s²
x = m
7.Circular motionMedium
r = 135 mvmax​ = ?

A car takes a flat curve of radius 135 m. The coefficient of static friction between tyres and road is 0.6. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 135 mμs = 0.6g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
r = 1.1 m11 m/svtop​ = ?

A 1 kg ball on a light string 1.1 m long is swung in a vertical circle. At the lowest point its speed is 11 m/s. Ignore air resistance and use g = 9.81 m/s². Find the tension Ttop in the string at the highest point.

m = 1 kgr = 1.1 mvbottom = 11 m/sg = 9.81 m/s²
Ttop = N
9.Work & energyMedium
45°d = 17 mμ = 0.25

A 5 kg block slides 17 m down a slope at 45° to the horizontal, with a coefficient of kinetic friction of 0.25. Find the work Wf done against friction.

m = 5 kgθ = 45°μ = 0.25d = 17 mg = 9.81 m/s²
Wf = J
10.Work & energyHard
h = 2 mL = 3.5 mμ = 0.1k = 2500 N/m

A 2.5 kg block is released from rest at height 2 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 3.5 m long (μ = 0.1) and then runs onto a spring (k = 2500 N/m) on a smooth surface. Find the maximum compression x of the spring.

m = 2.5 kgh = 2 mL = 3.5 mμ = 0.1k = 2500 N/mg = 9.81 m/s²
x = cm
11.Momentum & collisionsMedium
1700 kg25 m/s600 kg

A 1700 kg car moving at 25 m/s runs into a stationary 600 kg car and the two lock together. What percentage ΔK/K of the original kinetic energy is lost?

m1 = 1700 kgv1 = 25 m/sm2 = 600 kgv2 = 0
ΔK/K = %
12.Momentum & collisionsHard
30 m/s4 m/s

A 0.25 kg ball hits a wall at 30 m/s and bounces straight back at 4 m/s. The contact lasts 50 ms. Find the average force Favg of the wall on the ball.

m = 0.25 kgvin = 30 m/svout = 4 m/sΔt = 50 ms
Favg = N
13.Rigid-body rotationMedium
L = 2.8 mm = 19 kgα

A uniform slender rod of mass 19 kg and length 2.8 m is pinned at one end and held horizontal. It is released from rest. Use g = 9.81 m/s². Find the acceleration atip of the free end just after release.

m = 19 kgL = 2.8 mg = 9.81 m/s²
atip = m/s²
14.Rigid-body rotationHard
θ = 35°vs = 1 m

A thin hoop starts from rest and rolls without slipping down a slope inclined at 35° to the horizontal. Use g = 9.81 m/s². Find its speed v after it has rolled 1 m along the slope.

θ = 35°s = 1 mI = m·r²g = 9.81 m/s²
v = m/s
15.Gears & gear trainsMedium
N1​ = 16N2​ = 50

A 15 kW motor running at 1440 rpm drives a pinion with 16 teeth, which meshes with a gear with 50 teeth. The gear pair has an efficiency of 97%. Find the torque T1 on the motor shaft.

P = 15 kWn1 = 1440 rpmN1 = 16N2 = 50η = 97%
T1 = N·m
16.Gears & gear trainsHard
Ns​ = 20nr​ = ?Np​ = 24carrier fixed

In a planetary gear set the sun gear has 20 teeth and each planet gear has 24 teeth. The planet carrier is held fixed and the sun is driven at 3000 rpm. Find the speed nr of the ring gear (magnitude).

Ns = 20Np = 24ns = 3000 rpm
nr = rpm
17.Springs & pendulumsMedium
L = ?

How long must a simple pendulum be to have a period of 3 s? Use g = 9.81 m/s². Find L.

T = 3 sg = 9.81 m/s²
L = m
18.Springs & pendulumsHard
t (s)x (cm)t = ?9.6

A body oscillates in simple harmonic motion with period 1 s and amplitude 12 cm. What is the shortest time t it needs to move from equilibrium to a displacement of 9.6 cm?

T = 1 sA = 12 cmx = 9.6 cm
t = s
19.Mechanical vibrationsMedium
k = 5 kN/mζ = 0.3m = 10 kg

A 10 kg mass on a spring with a stiffness of 5 kN/m has a viscous damper giving a damping ratio of 0.3. Find the damped natural frequency fd of its free vibration in Hz.

m = 10 kgk = 5 kN/mζ = 0.3
fd = Hz
20.Mechanical vibrationsHard
k1​ = 12k2​ = 12m = 50 kg

A 50 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 12 kN/m and k₂ = 12 kN/m. The mass stays level. Find the equivalent stiffness keq of the spring system in kN/m.

m = 50 kgk1 = 12 kN/mk2 = 12 kN/m
keq = kN/m

3Solutions

1.Kinematics

Answer: t = 5 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 90/3.6 = 25 m/s

Braking time

0 = v₀ − a·t → t = v₀/a = 25/5 = 5 s

Answer

t = 5 s
2.Kinematics

Answer: t = 3.739 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−5 = 17·t − ½·9.81·t²
4.905·t² − 17·t − 5 = 0

Solve the quadratic

Only the positive root is physical.

t = (17 + √(17² + 2·9.81·5))/9.81 = 3.739 s

Answer

t = 3.739 s
3.Newton’s laws

Answer: μ = 0.2509

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Deceleration

a = v₀²/(2d) = 8²/(2·13) = 2.462 m/s²

Friction coefficient

μ·m·g = m·a → μ = a/g = 2.462/9.81 = 0.2509

Answer

μ = 0.2509
4.Newton’s laws

Answer: T = 31.88 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (49.05 − 14.71)/10 = 3.433 m/s²

Tension from the block on the table

T − μ·m1·g = m1·a
T = 5·3.433 + 14.71 = 31.88 N

Answer

T = 31.88 N
5.Projectile motion

Answer: y = 4.964 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Time to the wall

vx = 12·cos 70° = 4.104 m/s
t = x/vx = 7/4.104 = 1.706 s

Height at that time

y = 11.28·1.706 − ½·9.81·1.706² = 4.964 m

Answer

y = 4.964 m

The ball is already on its way down at the wall.

6.Projectile motion

Answer: x = 57.71 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

vx = 12.26 m/s, vy = 26.28 m/s

Time to land on the roof

Larger root: the ball is descending.

15 = 26.28·t − 4.905·t²
t = (26.28 + √(26.28² − 2·9.81·15))/9.81 = 4.709 s

Horizontal distance

x = vx·t = 12.26·4.709 = 57.71 m

Answer

x = 57.71 m
7.Circular motion

Answer: vmax = 28.19 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.6·9.81·135) = 28.19 m/s

Answer

vmax = 28.19 m/s (101.5 km/h)
8.Circular motion

Answer: Ttop = 60.95 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Speed at the top

Kinetic energy is traded for potential energy over a height 2r.

vtop² = 11² − 4·9.81·1.1 = 77.84 m²/s²

Forces at the top

Tension and gravity both point down, towards the centre.

T + m·g = m·vtop²/r
T = 1·77.84/1.1 − 1·9.81 = 60.95 N

Answer

Ttop = 60.95 N
9.Work & energy

Answer: Wf = 147.4 J

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Friction force

N = mg·cos θ = 49.05·0.7071 = 34.68 N
F = μN = 0.25·34.68 = 8.671 N

Work against friction

Wf = F·d = 8.671·17 = 147.4 J

Answer

Wf = 147.4 J
10.Work & energy

Answer: x = 17.99 cm

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 24.53·(2 − 0.1·3.5) = 40.47 J

Maximum compression

½kx² = 40.47 → x = √(2·40.47/2500) = 0.1799 m = 17.99 cm

Answer

x = 17.99 cm
11.Momentum & collisions

Answer: ΔK/K = 26.09 %

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Common velocity

v′ = m1·v1/(m1 + m2) = 1700·25/2300 = 18.48 m/s

Kinetic energy before and after

Kbefore = ½·1700·25² = 531250 J
Kafter = ½·2300·18.48² = 392663 J

Fraction lost

ΔK/K = 138587/531250 = 26.09 %

Answer

ΔK/K = 26.09 %

The lost energy goes into deformation, heat and sound.

12.Momentum & collisions

Answer: Favg = 170 N

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.25·(4 + 30) = 8.5 N·s

Average force

Favg = J/Δt = 8.5/0.05 = 170 N

Answer

Favg = 170 N
13.Rigid-body rotation

Answer: atip = 14.71 m/s²

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Moments about the pin

At the moment of release ω = 0, so there is no centripetal acceleration and the centre accelerates straight down.

m·g·L/2 = (m·L²/3)·α → α = 3g/(2L) = 3·9.81/(2·2.8) = 5.255 rad/s²

Acceleration of the free end

atip = α·L = 5.255·2.8 = 14.71 m/s²

Answer

atip = 14.71 m/s²

atip = 1.5·g for any length: the free end falls faster than a dropped stone.

14.Rigid-body rotation

Answer: v = 2.372 m/s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Height dropped

h = s·sin θ = 1·sin 35° = 0.5736 m

Energy balance with rolling

Rolling without slipping: ω = v/r, and friction does no work at the contact point.

m·g·h = ½·m·v²·(1 + 1)
v = √(2·9.81·0.5736/2) = 2.372 m/s

Answer

v = 2.372 m/s
15.Gears & gear trains

Answer: T1 = 99.47 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·1440/60 = 150.8 rad/s
T1 = P/ω₁ = 15000/150.8 = 99.47 N·m

Answer

T1 = 99.47 N·m
16.Gears & gear trains

Answer: nr = 882.4 rpm

Planetary gear sets: the speeds of sun, ring and carrier are linked by the Willis equation (ns − nc)/(nr − nc) = −Nr/Ns: seen from the carrier, the set is an ordinary train with the planets as idlers. Holding one member fixed turns the set into a single-ratio reducer.

Ring gear teeth

Nr = Ns + 2·Np = 20 + 2·24 = 68

Willis equation with the carrier fixed

With nc = 0 the sun drives the ring through the planets, which act as idlers.

nr = −ns·Ns/Nr = −3000·20/68 = −882.4 rpm
|nr| = 882.4 rpm

Answer

nr = 882.4 rpm

The ring turns opposite to the sun.

17.Springs & pendulums

Answer: L = 2.236 m

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Solve for the length

L = g·(T/2π)² = 9.81·(3/2π)² = 2.236 m

Answer

L = 2.236 m
18.Springs & pendulums

Answer: t = 0.1476 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = 2π/T = 2π/1 = 6.283 rad/s

Solve for the time

0.8 = sin(ω·t) → ω·t = arcsin(0.8) = 0.9273 rad
t = 0.9273/6.283 = 0.1476 s

Answer

t = 0.1476 s
19.Mechanical vibrations

Answer: fd = 3.395 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(5000/10) = 22.36 rad/s
fn = 22.36/(2π) = 3.559 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 3.559·√(1 − 0.3²) = 3.395 Hz

Answer

fd = 3.395 Hz
20.Mechanical vibrations

Answer: keq = 24 kN/m

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 12 + 12 = 24 kN/m

Answer

keq = 24 kN/m

ExamProblems · examproblems.com/courses/dynamics