Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
policea = 5.5 m/s²car27 m/s

A car speeding at a constant 27 m/s passes a police car standing still. At that moment the police car starts and accelerates uniformly at 5.5 m/s². How far from its starting point does the police car catch up? Find d.

vcar = 27 m/sapolice = 5.5 m/s²v0,police = 0
d = m
2.KinematicsHard
AB: 19 m/s40 m

Ball A is dropped from rest from a height of 40 m. At the same instant ball B is thrown straight up from the ground directly below at 19 m/s. Ignore air resistance and use g = 9.81 m/s². At what height y above the ground do they meet?

H = 40 mv0B = 19 m/sg = 9.81 m/s²
y = m
3.Newton’s lawsMedium
5 kg2 kg

Masses of 5 kg and 2 kg hang on either side of a light, frictionless pulley, connected by a light string. The system is released from rest. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 5 kgm2 = 2 kgg = 9.81 m/s²
T = N
4.Newton’s lawsHard
2 kg10 kgTF = 125 Nμ = 0.25

Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 125 N pulls the front 10 kg block; the 2 kg block is towed behind. The coefficient of kinetic friction is 0.25 for both blocks. Use g = 9.81 m/s². Find the tension T in the connecting string.

m1 = 2 kgm2 = 10 kgF = 125 Nμ = 0.25g = 9.81 m/s²
T = N
5.Projectile motionMedium
23 my = ?v0​ = 28 m/s35°

A ball is kicked from level ground at 28 m/s and 35° above the horizontal towards a wall 23 m away. Ignore air resistance and use g = 9.81 m/s². At what height y does the ball pass the wall?

v₀ = 28 m/sθ = 35°x = 23 mg = 9.81 m/s²
y = m
6.Projectile motionHard
h = 40 mv0​ = 16 m/s55°α = ?

A ball is launched at 16 m/s and 55° above the horizontal from the top of a 40 m cliff. Ignore air resistance and use g = 9.81 m/s². At what angle α below the horizontal does it hit the ground?

v₀ = 16 m/sθ = 55°h = 40 mg = 9.81 m/s²
α = °
7.Circular motionMedium
r = 105 mvmax​ = ?

A car takes a flat curve of radius 105 m. The coefficient of static friction between tyres and road is 0.4. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 105 mμs = 0.4g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
θ = 20°to centrevmax​ = ?

A curve of radius 260 m is banked at 20°, and the coefficient of static friction between tyres and road is 0.1. Use g = 9.81 m/s². Find the highest speed vmax at which a car can take the curve without sliding up and out.

r = 260 mθ = 20°μs = 0.1g = 9.81 m/s²
vmax = m/s
9.Work & energyMedium
40°d = 8 mμ = 0.35

A block slides from rest down a slope at 40° to the horizontal. The coefficient of kinetic friction is 0.35. Find its speed v after it has slid 8 m along the slope.

θ = 40°μ = 0.35d = 8 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
F = 25 N35°μ = 0.32 kg

A 2 kg block starts from rest at the bottom of a 35° slope and is pulled up the slope by a constant force of 25 N parallel to the slope. The coefficient of kinetic friction is 0.3. Find the speed v of the block after it has moved 7 m up the slope.

m = 2 kgF = 25 Nθ = 35°μ = 0.3d = 7 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
900 kg6 m/s800 kg

A 900 kg car moving at 6 m/s runs into a stationary 800 kg car and the two lock together. What percentage ΔK/K of the original kinetic energy is lost?

m1 = 900 kgv1 = 6 m/sm2 = 800 kgv2 = 0
ΔK/K = %
12.Momentum & collisionsHard
23 m/s15 m/s

A 0.5 kg ball hits a wall at 23 m/s and bounces straight back at 15 m/s. The contact lasts 5 ms. Find the average force Favg of the wall on the ball.

m = 0.5 kgvin = 23 m/svout = 15 m/sΔt = 5 ms
Favg = N
13.Rigid-body rotationMedium
L = 0.5 mm = 2 kgα

A uniform slender rod of mass 2 kg and length 0.5 m is pinned at one end and held horizontal. It is released from rest. Use g = 9.81 m/s². Find the acceleration atip of the free end just after release.

m = 2 kgL = 0.5 mg = 9.81 m/s²
atip = m/s²
14.Rigid-body rotationHard
600 m/s15 g1.07 mL = 1.8 m3 kgφ

A uniform slender rod of mass 3 kg and length 1.8 m hangs at rest from a frictionless pivot at its top end. A 15 g bullet moving horizontally at 600 m/s hits the rod 1.07 m below the pivot and stays embedded. Use g = 9.81 m/s². Find the largest angle φ from the vertical through which the rod swings.

M = 3 kgL = 1.8 mm = 15 gv = 600 m/sd = 1.07 mg = 9.81 m/s²
φ = °
15.Gears & gear trainsMedium
N1​ = 25, m = 5 mm

A 1.1 kW motor running at 960 rpm drives a pinion with 25 teeth and a module of 5 mm. Find the tangential force Ft on the pinion teeth.

P = 1.1 kWn = 960 rpmN1 = 25m = 5 mm
Ft = N
16.Gears & gear trainsHard
d1​ = 80 mmd2​ = 400 mm1500 rpmC = 1200 mmT1​ = 1000 NT2​P = ?

An open belt connects an 80 mm driving pulley at 1500 rpm to a 400 mm pulley; the centres are 1200 mm apart. The coefficient of friction is 0.25 and the tight-side tension may not exceed 1000 N. Find the largest power P the belt can transmit without slipping, in kW (ignore centrifugal effects).

d1 = 80 mmn1 = 1500 rpmd2 = 400 mmC = 1200 mmμ = 0.25T1 = 1000 N
P = kW
17.Springs & pendulumsMedium
L = ?

How long must a simple pendulum be to have a period of 0.8 s? Use g = 9.81 m/s². Find L.

T = 0.8 sg = 9.81 m/s²
L = m
18.Springs & pendulumsHard
3 kgk = 400 N/m300 m/s

An 8 g bullet moving at 300 m/s hits and stays in a 3 kg block resting on a frictionless surface. The block is attached to a horizontal spring with k = 400 N/m. Find the amplitude A of the resulting oscillation in cm.

m = 8 gv = 300 m/sM = 3 kgk = 400 N/m
A = cm
19.Mechanical vibrationsMedium
tx50 mm1 cycle23.4 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 50 mm is followed one cycle later by a peak of 23.4 mm. Find the damping ratio ζ.

x0 = 50 mmx1 = 23.4 mmn = 1
ζ =
20.Mechanical vibrationsHard
k1​ = 30k2​ = 15m = 5 kg

A 5 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 30 kN/m and k₂ = 15 kN/m. The mass stays level. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 5 kgk1 = 30 kN/mk2 = 15 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: d = 265.1 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equal distances

v·t = ½·a·t² → t = 2v/a = 2·27/5.5 = 9.818 s

Distance

d = v·t = 27·9.818 = 265.1 m

Answer

d = 265.1 m

At that moment the police car moves at 2v = 54 m/s.

2.Kinematics

Answer: y = 18.26 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Meeting time

Up is positive, the ground is y = 0.

40 − ½g·t² = 19·t − ½g·t² → t = 40/19 = 2.105 s

Meeting height

y = 19·2.105 − ½·9.81·2.105² = 18.26 m

Answer

y = 18.26 m
3.Newton’s laws

Answer: T = 28.03 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration

The net driving force is the difference of the weights; it moves the total mass.

a = (5 − 2)·9.81/(5 + 2) = 4.204 m/s²

Tension from the lighter mass

T − m2·g = m2·a → T = 2·(9.81 + 4.204) = 28.03 N

Answer

T = 28.03 N
4.Newton’s laws

Answer: T = 20.83 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Whole system

a = (F − μ·(m1 + m2)·g)/(m1 + m2) = (125 − 29.43)/12 = 7.964 m/s²

Rear block alone

T = m1·(a + μ·g) = 2·(7.964 + 2.453) = 20.83 N

Answer

T = 20.83 N

With the same μ on both blocks, friction drops out: T = F·m₁/(m₁ + m₂).

5.Projectile motion

Answer: y = 11.17 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Time to the wall

vx = 28·cos 35° = 22.94 m/s
t = x/vx = 23/22.94 = 1.003 s

Height at that time

y = 16.06·1.003 − ½·9.81·1.003² = 11.17 m

Answer

y = 11.17 m

The ball is still rising at the wall.

6.Projectile motion

Answer: α = 73.47 °

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

vx = 16·cos 55° = 9.177 m/s
vy0 = 16·sin 55° = 13.11 m/s

Vertical speed at impact

Energy or v² = v₀² + 2as in the vertical direction.

vy = √(13.11² + 2·9.81·40) = 30.93 m/s

Impact angle

tan α = vy/vx = 30.93/9.177 → α = 73.47°

Answer

α = 73.47°
7.Circular motion

Answer: vmax = 20.3 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.4·9.81·105) = 20.3 m/s

Answer

vmax = 20.3 m/s (73.07 km/h)
8.Circular motion

Answer: vmax = 35.04 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Force balances

Friction points down the slope.

N·(sin θ + μ·cos θ) = m·v²/r
N·(cos θ − μ·sin θ) = m·g

Speed

v = √(260·9.81·0.436/0.9055) = 35.04 m/s

Answer

vmax = 35.04 m/s
(126.2 km/h)
9.Work & energy

Answer: v = 7.669 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy balance along the slope

The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.

½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·8·(0.6428 − 0.35·0.766)) = 7.669 m/s

Answer

v = 7.669 m/s
10.Work & energy

Answer: v = 7.904 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Forces along the slope

m·g = 2·9.81 = 19.62 N
mg·sin θ = 11.25 N
μ·mg·cos θ = 4.822 N

Work–energy

½mv² = (25 − 16.08)·7 = 62.47 J
v = √(2·62.47/2) = 7.904 m/s

Answer

v = 7.904 m/s
11.Momentum & collisions

Answer: ΔK/K = 47.06 %

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Common velocity

v′ = m1·v1/(m1 + m2) = 900·6/1700 = 3.176 m/s

Kinetic energy before and after

Kbefore = ½·900·6² = 16200 J
Kafter = ½·1700·3.176² = 8576 J

Fraction lost

ΔK/K = 7624/16200 = 47.06 %

Answer

ΔK/K = 47.06 %

The lost energy goes into deformation, heat and sound.

12.Momentum & collisions

Answer: Favg = 3800 N

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.5·(15 + 23) = 19 N·s

Average force

Favg = J/Δt = 19/0.005 = 3800 N

Answer

Favg = 3800 N
13.Rigid-body rotation

Answer: atip = 14.71 m/s²

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Moments about the pin

At the moment of release ω = 0, so there is no centripetal acceleration and the centre accelerates straight down.

m·g·L/2 = (m·L²/3)·α → α = 3g/(2L) = 3·9.81/(2·0.5) = 29.43 rad/s²

Acceleration of the free end

atip = α·L = 29.43·0.5 = 14.71 m/s²

Answer

atip = 14.71 m/s²

atip = 1.5·g for any length: the free end falls faster than a dropped stone.

14.Rigid-body rotation

Answer: φ = 62.24 °

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Moment of inertia after the impact

I = M·L²/3 + m·d² = 3·1.8²/3 + 0.015·1.07² = 3.257 kg·m²

Angular momentum about the pivot

The pivot force passes through the pivot, so it has no moment there during the impact.

m·v·d = I·ω → ω = 0.015·600·1.07/3.257 = 2.957 rad/s

Energy during the swing

½·I·ω² = ½·3.257·2.957² = 14.24 J
(M·g·L/2 + m·g·d)·(1 − cos φ) = 26.64·(1 − cos φ)
cos φ = 1 − 14.24/26.64 = 0.4657 → φ = 62.24°

Answer

φ = 62.24°
15.Gears & gear trains

Answer: Ft = 175.1 N

Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.

Torque on the pinion

ω = 2π·960/60 = 100.5 rad/s
T = P/ω = 1100/100.5 = 10.94 N·m

Pitch diameter

d = m·N = 5·25 = 125 mm

Tangential force

Ft = 2T/d = 2·10.94/0.125 = 175.1 N

Answer

Ft = 175.1 N
16.Gears & gear trains

Answer: P = 3.22 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Angle of wrap

θ = 2.874 rad

Slack-side tension

eμθ = e0.7185 = 2.051, T₂ = 1000/2.051 = 487.5 N

Power

P = (1000 − 487.5)·6.283 = 3.22 kW

Answer

P = 3.22 kW
17.Springs & pendulums

Answer: L = 0.159 m

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Solve for the length

L = g·(T/2π)² = 9.81·(0.8/2π)² = 0.159 m

Answer

L = 0.159 m
18.Springs & pendulums

Answer: A = 6.919 cm

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Speed after impact

V = m·v/(m + M) = 0.008·300/3.008 = 0.7979 m/s

Angular frequency

ω = √(k/(m + M)) = √(400/3.008) = 11.53 rad/s

Amplitude

A = V/ω = 0.7979/11.53 = 0.06919 m = 6.919 cm

Answer

A = 6.919 cm
19.Mechanical vibrations

Answer: ζ = 0.12

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/1)·ln(50/23.4) = 0.7593

Damping ratio

ζ = δ/√(4π² + δ²) = 0.7593/√(39.48 + 0.5765) = 0.12

Answer

ζ = 0.12
20.Mechanical vibrations

Answer: fn = 15.1 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 30 + 15 = 45 kN/m

Natural frequency

ωn = √(45000/5) = 94.87 rad/s
fn = 94.87/(2π) = 15.1 Hz

Answer

fn = 15.1 Hz

ExamProblems · examproblems.com/courses/dynamics