Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)1.667 s10

A car driving at 36 km/h brakes with a constant deceleration of 6 m/s² until it stops. Find the braking distance s.

v₀ = 36 km/ha = −6 m/s²v = 0
s = m
2.KinematicsHard
v₀ = 9 m/s10 m

A ball is thrown straight up at 9 m/s from the edge of a roof 10 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 9 m/sh₀ = 10 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
θ = 40°a = ?m = 18 kg

An 18 kg block slides down a slope at 40° to the horizontal. The coefficient of kinetic friction is 0.2. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 18 kgθ = 40°μ = 0.2g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 9 kg6.5 kgθ = 30°

A 9 kg block on a ramp at 30° is connected by a light string over a frictionless pulley at the top of the ramp to a hanging 6.5 kg mass. The hanging mass moves down. The ramp is frictionless. Use g = 9.81 m/s². Find the acceleration a of the system.

m1 = 9 kgm2 = 6.5 kgθ = 30°μ = 0g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
v0​ = ?40°R = 25 m

A ball is launched from level ground at 40° above the horizontal and lands 25 m away. Ignore air resistance and use g = 9.81 m/s². Find the launch speed v0.

θ = 40°R = 25 mg = 9.81 m/s²
v0 = m/s
6.Projectile motionHard
h = 15 mv0​ = 30 m/s50°α = ?

A ball is launched at 30 m/s and 50° above the horizontal from the top of a 15 m cliff. Ignore air resistance and use g = 9.81 m/s². At what angle α below the horizontal does it hit the ground?

v₀ = 30 m/sθ = 50°h = 15 mg = 9.81 m/s²
α = °
7.Circular motionMedium
r = 2.7 mn = ?

In a fairground rotor, riders stand against the wall of a vertical cylinder of radius 2.7 m. When it spins fast enough the floor drops away and friction holds them up. The coefficient of static friction is 0.6. Use g = 9.81 m/s². Find the smallest rotation rate n in revolutions per minute.

r = 2.7 mμs = 0.6g = 9.81 m/s²
n = rpm
8.Circular motionHard
r = 1.4 mv = 6.5 m/s

A 1.6 kg ball on a string 1.4 m long is swung in a vertical circle. At the lowest point it moves at 6.5 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.

m = 1.6 kgr = 1.4 mv = 6.5 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
45°d = 7 mμ = 0.1

A 5 kg block slides 7 m down a slope at 45° to the horizontal, with a coefficient of kinetic friction of 0.1. Find the work Wf done against friction.

m = 5 kgθ = 45°μ = 0.1d = 7 mg = 9.81 m/s²
Wf = J
10.Work & energyHard
h = 5 mL = 3.5 mμ = 0.15k = 2500 N/m

A 1 kg block is released from rest at height 5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 3.5 m long (μ = 0.15) and then runs onto a spring (k = 2500 N/m) on a smooth surface. Find the maximum compression x of the spring.

m = 1 kgh = 5 mL = 3.5 mμ = 0.15k = 2500 N/mg = 9.81 m/s²
x = cm
11.Momentum & collisionsMedium
2 kg9 m/s4.5 kg

A 2 kg glider moving at 9 m/s makes a perfectly elastic head-on collision with a 4.5 kg glider at rest on a frictionless track. Find the velocity v′2 of the second glider after the collision.

m1 = 2 kgm2 = 4.5 kgv1 = 9 m/sv2 = 0
v′2 = m/s
12.Momentum & collisionsHard
1.5 kgv = ?5 g10°L = 1.9 m

A 5 g bullet is fired horizontally into a 1.5 kg block hanging from light strings 1.9 m long, and stays in it. The strings swing out to a largest angle of 10° from the vertical. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 5 gM = 1.5 kgL = 1.9 mθ = 10°g = 9.81 m/s²
v = m/s
13.Rigid-body rotationMedium
ω = ?L = 0.6 mm = 7 kg

A uniform slender rod of mass 7 kg and length 0.6 m is pinned at one end and released from rest in a horizontal position. Ignore friction and use g = 9.81 m/s². Find the angular velocity ω of the rod as it swings through the vertical position.

m = 7 kgL = 0.6 mg = 9.81 m/s²
ω = rad/s
14.Rigid-body rotationHard
θ = 20°a

A hollow sphere rolls without slipping down a slope inclined at 20° to the horizontal. Use g = 9.81 m/s². Find the acceleration a of its centre.

θ = 20°I = (2/3)·m·r²g = 9.81 m/s²
a = m/s²
15.Gears & gear trainsMedium
N1​ = 24, m = 5 mm

A 1.5 kW motor running at 1450 rpm drives a pinion with 24 teeth and a module of 5 mm. Find the tangential force Ft on the pinion teeth.

P = 1.5 kWn = 1450 rpmN1 = 24m = 5 mm
Ft = N
16.Gears & gear trainsHard
Ns​ = 24nr​ = ?Np​ = 24carrier fixed

In a planetary gear set the sun gear has 24 teeth and each planet gear has 24 teeth. The planet carrier is held fixed and the sun is driven at 1800 rpm. Find the speed nr of the ring gear (magnitude).

Ns = 24Np = 24ns = 1800 rpm
nr = rpm
17.Springs & pendulumsMedium
t (s)x (cm)0.75 s

A 2.5 kg mass on a spring with k = 130 N/m is pulled 8 cm in the positive direction and released from rest at t = 0. Find its displacement x from equilibrium at t = 0.75 s (with sign).

m = 2.5 kgk = 130 N/mA = 8 cmt = 0.75 s
x = cm
18.Springs & pendulumsHard
0.8 kgk = 180 N/m

A 0.8 kg mass is attached to the lower end of an unstretched vertical spring with k = 180 N/m and released from rest. Use g = 9.81 m/s². Find the greatest extension xmax of the spring in cm.

m = 0.8 kgk = 180 N/mg = 9.81 m/s²
xmax = cm
19.Mechanical vibrationsMedium
tx20 mm3 cycles7.8 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 20 mm is followed 3 cycles later by a peak of 7.8 mm. Find the damping ratio ζ.

x0 = 20 mmx3 = 7.8 mmn = 3
ζ =
20.Mechanical vibrationsHard
k1​ = 50k2​ = 20m = 20 kg

A 20 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 50 kN/m and k₂ = 20 kN/m. The mass stays level. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 20 kgk1 = 50 kN/mk2 = 20 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: s = 8.333 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 36/3.6 = 10 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 10²/(2·6) = 8.333 m

Answer

s = 8.333 m
2.Kinematics

Answer: t = 2.615 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−10 = 9·t − ½·9.81·t²
4.905·t² − 9·t − 10 = 0

Solve the quadratic

Only the positive root is physical.

t = (9 + √(9² + 2·9.81·10))/9.81 = 2.615 s

Answer

t = 2.615 s
3.Newton’s laws

Answer: a = 4.803 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 40° − 0.2·cos 40°) = 9.81·(0.6428 − 0.1532) = 4.803 m/s²

Answer

a = 4.803 m/s²
4.Newton’s laws

Answer: a = 1.266 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the string

m₂·g = 63.77 N
m₁·g·sin θ = 44.14 N
μ·m₁·g·cos θ = 0 N

Acceleration of the system

a = (63.77 − 44.14 − 0)/15.5 = 1.266 m/s²

Answer

a = 1.266 m/s²
5.Projectile motion

Answer: v0 = 15.78 m/s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Solve the range formula for v₀

v₀ = √(g·R/sin 2θ) = √(9.81·25/sin 80°) = 15.78 m/s

Answer

v0 = 15.78 m/s
6.Projectile motion

Answer: α = 56.08 °

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

vx = 30·cos 50° = 19.28 m/s
vy0 = 30·sin 50° = 22.98 m/s

Vertical speed at impact

Energy or v² = v₀² + 2as in the vertical direction.

vy = √(22.98² + 2·9.81·15) = 28.68 m/s

Impact angle

tan α = vy/vx = 28.68/19.28 → α = 56.08°

Answer

α = 56.08°
7.Circular motion

Answer: n = 23.5 rpm

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces on a rider

N = m·ω²·r
μ·N = m·g → μ·ω²·r = g

Angular speed

ω = √(g/(μ·r)) = √(9.81/(0.6·2.7)) = 2.461 rad/s

Rotation rate

n = ω·60/(2π) = 23.5 rpm

Answer

n = 23.5 rpm
8.Circular motion

Answer: T = 63.98 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the lowest point

Towards the centre (up) is positive.

T − m·g = m·v²/r
T = 1.6·9.81 + 1.6·6.5²/1.4 = 15.7 + 48.29 = 63.98 N

Answer

T = 63.98 N
9.Work & energy

Answer: Wf = 24.28 J

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Friction force

N = mg·cos θ = 49.05·0.7071 = 34.68 N
F = μN = 0.1·34.68 = 3.468 N

Work against friction

Wf = F·d = 3.468·7 = 24.28 J

Answer

Wf = 24.28 J
10.Work & energy

Answer: x = 18.74 cm

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 9.81·(5 − 0.15·3.5) = 43.9 J

Maximum compression

½kx² = 43.9 → x = √(2·43.9/2500) = 0.1874 m = 18.74 cm

Answer

x = 18.74 cm
11.Momentum & collisions

Answer: v′2 = 5.538 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (2 − 4.5)/(2 + 4.5)·9 = −3.462 m/s
v′2 = 2·2/(2 + 4.5)·9 = 5.538 m/s

Answer

v′2 = 5.538 m/s
12.Momentum & collisions

Answer: v = 226.5 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Rise of the block

h = L·(1 − cos θ) = 1.9·(1 − cos 10°) = 0.02887 m

Speed after impact

V = √(2·9.81·0.02887) = 0.7526 m/s

Collision

v = (m + M)·V/m = 1.505·0.7526/0.005 = 226.5 m/s

Answer

v = 226.5 m/s
13.Rigid-body rotation

Answer: ω = 7.004 rad/s

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Loss of potential energy

m·g·L/2 = 7·9.81·0.3 = 20.6 J

Moment of inertia about the pin

IO = m·L²/3 = 7·0.6²/3 = 0.84 kg·m²

Energy balance

½·IO·ω² = 20.6 → ω = √(2·20.6/0.84) = 7.004 rad/s

Answer

ω = 7.004 rad/s
14.Rigid-body rotation

Answer: a = 2.013 m/s²

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Equations of motion

m·g·sin θ − f = m·a
f·r = I·α = 0.6667·m·r²·(a/r) → f = 0.6667·m·a

Acceleration

a = g·sin θ/(1 + c) = 9.81·sin 20°/1.667 = 2.013 m/s²

Answer

a = 2.013 m/s²
15.Gears & gear trains

Answer: Ft = 164.6 N

Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.

Torque on the pinion

ω = 2π·1450/60 = 151.8 rad/s
T = P/ω = 1500/151.8 = 9.879 N·m

Pitch diameter

d = m·N = 5·24 = 120 mm

Tangential force

Ft = 2T/d = 2·9.879/0.12 = 164.6 N

Answer

Ft = 164.6 N
16.Gears & gear trains

Answer: nr = 600 rpm

Planetary gear sets: the speeds of sun, ring and carrier are linked by the Willis equation (ns − nc)/(nr − nc) = −Nr/Ns: seen from the carrier, the set is an ordinary train with the planets as idlers. Holding one member fixed turns the set into a single-ratio reducer.

Ring gear teeth

Nr = Ns + 2·Np = 24 + 2·24 = 72

Willis equation with the carrier fixed

With nc = 0 the sun drives the ring through the planets, which act as idlers.

nr = −ns·Ns/Nr = −1800·24/72 = −600 rpm
|nr| = 600 rpm

Answer

nr = 600 rpm

The ring turns opposite to the sun.

17.Springs & pendulums

Answer: x = 5.129 cm

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(130/2.5) = 7.211 rad/s
ω·t = 7.211·0.75 = 5.408 rad

Displacement

x = A·cos(ω·t) = 8·cos(5.408) = 5.129 cm

Answer

x = 5.129 cm
18.Springs & pendulums

Answer: xmax = 8.72 cm

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Equilibrium and amplitude

x₀ = m·g/k = 0.8·9.81/180 = 0.0436 m = A

Lowest point

xmax = 2A = 0.0872 m = 8.72 cm

Answer

xmax = 8.72 cm
19.Mechanical vibrations

Answer: ζ = 0.04989

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/3)·ln(20/7.8) = 0.3139

Damping ratio

ζ = δ/√(4π² + δ²) = 0.3139/√(39.48 + 0.09851) = 0.04989

Answer

ζ = 0.04989
20.Mechanical vibrations

Answer: fn = 9.416 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 50 + 20 = 70 kN/m

Natural frequency

ωn = √(70000/20) = 59.16 rad/s
fn = 59.16/(2π) = 9.416 Hz

Answer

fn = 9.416 Hz

ExamProblems · examproblems.com/courses/dynamics