Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)3 s15

A car driving at 54 km/h brakes with a constant deceleration of 5 m/s² until it stops. Find the braking distance s.

v₀ = 54 km/ha = −5 m/s²v = 0
s = m
2.KinematicsHard
AB: 30 m/s25 m

Ball A is dropped from rest from a height of 25 m. At the same instant ball B is thrown straight up from the ground directly below at 30 m/s. Ignore air resistance and use g = 9.81 m/s². At what height y above the ground do they meet?

H = 25 mv0B = 30 m/sg = 9.81 m/s²
y = m
3.Newton’s lawsMedium
θ = 45°a = ?m = 13 kg

A 13 kg block slides down a frictionless slope at 45° to the horizontal. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 13 kgθ = 45°μ = 0g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
θ = 35°blockv₀ = 8 m/s

A block is given a push so that it starts sliding up a ramp at 35° with a speed of 8 m/s. The coefficient of kinetic friction is 0.15. Use g = 9.81 m/s². How far d along the ramp does it slide before it stops?

v₀ = 8 m/sθ = 35°μ = 0.15g = 9.81 m/s²
d = m
5.Projectile motionMedium
v0​ = 16 m/sθ = ?R = 20 m

A ball is launched from level ground at 16 m/s and must land 20 m away. Ignore air resistance and use g = 9.81 m/s². Find the smaller of the two possible launch angles θ.

v₀ = 16 m/sR = 20 mg = 9.81 m/s²
θ = °
6.Projectile motionHard
h = 20 mv0​ = 17 m/s30°range

A ball is launched at 30° above horizontal from the top of a 20 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 17 m/sθ = 30°h = 20 mg = 9.81 m/s²
t = s
7.Circular motionMedium
r = 20 mvmax​ = ?

A car takes a flat curve of radius 20 m. The coefficient of static friction between tyres and road is 0.6. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 20 mμs = 0.6g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
r = 1.1 mv = 3 m/s

A 1.7 kg ball on a string 1.1 m long is swung in a vertical circle. At the lowest point it moves at 3 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.

m = 1.7 kgr = 1.1 mv = 3 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
0.05 kgk = 800 N/mh = ?

A toy launcher has a vertical spring of stiffness 800 N/m. A 0.05 kg ball is placed on it and the spring is compressed by 10 cm, then released. Ignoring air resistance and the spring’s mass, find the height h the ball rises, measured from its position when the spring was compressed.

m = 0.05 kgk = 800 N/mx = 10 cmg = 9.81 m/s²
h = m
10.Work & energyHard
5 kg5 kgμ = 0.15d = 1 m

A 5 kg block rests on a rough horizontal table (μ = 0.15). A light string runs from it over a smooth pulley at the edge of the table to a hanging 5 kg block. The system is released from rest. Find the speed v of the blocks after the hanging block has dropped 1 m.

m1 = 5 kgm2 = 5 kgμ = 0.15d = 1 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
3 kg7 m/s1.5 kg

A 3 kg glider moving at 7 m/s makes a perfectly elastic head-on collision with a 1.5 kg glider at rest on a frictionless track. Find the velocity v′2 of the second glider after the collision.

m1 = 3 kgm2 = 1.5 kgv1 = 7 m/sv2 = 0
v′2 = m/s
12.Momentum & collisionsHard
900 kgv1​ = ?800 kg

A 900 kg car runs into a parked 800 kg car. The wrecks lock together and skid 19.5 m before stopping. The coefficient of kinetic friction between tyres and road is 0.5. Use g = 9.81 m/s². Find the speed v1 of the first car just before the collision.

m1 = 900 kgm2 = 800 kgd = 19.5 mμ = 0.5g = 9.81 m/s²
v1 = m/s
13.Rigid-body rotationMedium
L = 2.8 mm = 5 kgα

A uniform slender rod of mass 5 kg and length 2.8 m is pinned at one end and held horizontal. It is released from rest. Use g = 9.81 m/s². Find the vertical force R that the pin exerts on the rod just after release.

m = 5 kgL = 2.8 mg = 9.81 m/s²
R = N
14.Rigid-body rotationHard
θ = 10°vs = 3.5 m

A solid cylinder starts from rest and rolls without slipping down a slope inclined at 10° to the horizontal. Use g = 9.81 m/s². Its radius is 0.2 m. Find its angular velocity ω after it has rolled 3.5 m along the slope.

θ = 10°s = 3.5 mI = ½·m·r²g = 9.81 m/s²r = 0.2 m
ω = rad/s
15.Gears & gear trainsMedium
N1​ = 20, m = 4 mm

A 15 kW motor running at 1440 rpm drives a pinion with 20 teeth and a module of 4 mm. Find the tangential force Ft on the pinion teeth.

P = 15 kWn = 1440 rpmN1 = 20m = 4 mm
Ft = N
16.Gears & gear trainsHard
d1​ = 200 mmd2​ = 400 mm2880 rpmC = 500 mmT1​ = 1200 NT2​P = ?

An open belt connects a 200 mm driving pulley at 2880 rpm to a 400 mm pulley; the centres are 500 mm apart. The coefficient of friction is 0.35 and the tight-side tension may not exceed 1200 N. Find the largest power P the belt can transmit without slipping, in kW (ignore centrifugal effects).

d1 = 200 mmn1 = 2880 rpmd2 = 400 mmC = 500 mmμ = 0.35T1 = 1200 N
P = kW
17.Springs & pendulumsMedium
L = 0.6 mT = 2.53 s

An astronaut on another planet finds that a simple pendulum 0.6 m long has a period of 2.53 s for small swings. Find the gravitational acceleration g on that planet.

L = 0.6 mT = 2.53 s
g = m/s²
18.Springs & pendulumsHard
2 kgk = 260 N/m

A 2 kg mass is attached to the lower end of an unstretched vertical spring with k = 260 N/m and released from rest. Use g = 9.81 m/s². Find the greatest speed vmax of the mass.

m = 2 kgk = 260 N/mg = 9.81 m/s²
vmax = m/s
19.Mechanical vibrationsMedium
k = 15 kN/mζ = 0.35m = 20 kg

A 20 kg mass on a spring with a stiffness of 15 kN/m has a viscous damper giving a damping ratio of 0.35. Find the damped natural frequency fd of its free vibration in Hz.

m = 20 kgk = 15 kN/mζ = 0.35
fd = Hz
20.Mechanical vibrationsHard
k1​ = 50k2​ = 5m = 20 kg

A 20 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 50 kN/m and k₂ = 5 kN/m. The mass stays level. Find the equivalent stiffness keq of the spring system in kN/m.

m = 20 kgk1 = 50 kN/mk2 = 5 kN/m
keq = kN/m

3Solutions

1.Kinematics

Answer: s = 22.5 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 54/3.6 = 15 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 15²/(2·5) = 22.5 m

Answer

s = 22.5 m
2.Kinematics

Answer: y = 21.59 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Meeting time

Up is positive, the ground is y = 0.

25 − ½g·t² = 30·t − ½g·t² → t = 25/30 = 0.8333 s

Meeting height

y = 30·0.8333 − ½·9.81·0.8333² = 21.59 m

Answer

y = 21.59 m
3.Newton’s laws

Answer: a = 6.937 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 45° − 0·cos 45°) = 9.81·(0.7071 − 0) = 6.937 m/s²

Answer

a = 6.937 m/s²
4.Newton’s laws

Answer: d = 4.684 m

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Deceleration

Both forces point down the slope; the mass cancels.

a = 9.81·(sin 35° + 0.15·cos 35°) = 6.832 m/s²

Distance

d = v₀²/(2a) = 8²/(2·6.832) = 4.684 m

Answer

d = 4.684 m
5.Projectile motion

Answer: θ = 25.02 °

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Range formula

R = v₀²·sin 2θ/g → sin 2θ = 9.81·20/16² = 0.7664

Angle

2θ = 50.03° → θ = 25.02°

Answer

θ = 25.02°

The other solution is 90° − θ = 64.98°.

6.Projectile motion

Answer: t = 3.064 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 17·cos 30° = 14.72 m/s
vy = v0·sin θ = 17·sin 30° = 8.5 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 20 + 8.5·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (8.5 + √(72.25 + 392.4))/9.81 = 3.064 s

Answer

t = 3.064 s
7.Circular motion

Answer: vmax = 10.85 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.6·9.81·20) = 10.85 m/s

Answer

vmax = 10.85 m/s (39.06 km/h)
8.Circular motion

Answer: T = 30.59 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the lowest point

Towards the centre (up) is positive.

T − m·g = m·v²/r
T = 1.7·9.81 + 1.7·3²/1.1 = 16.68 + 13.91 = 30.59 N

Answer

T = 30.59 N
9.Work & energy

Answer: h = 8.155 m

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Spring energy

x = 10 cm = 0.1 m
½kx² = ½·800·0.1² = 4 J

Height

m·g = 0.05·9.81 = 0.4905 N
h = ½kx²/(mg) = 4/0.4905 = 8.155 m

Answer

h = 8.155 m
10.Work & energy

Answer: v = 2.888 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy released and lost

m₂g·d = 49.05·1 = 49.05 J
μ·m₁g·d = 0.15·49.05·1 = 7.357 J

Kinetic energy of both blocks

½(m₁ + m₂)v² = 41.69 → v = √(2·41.69/10) = 2.888 m/s

Answer

v = 2.888 m/s
11.Momentum & collisions

Answer: v′2 = 9.333 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (3 − 1.5)/(3 + 1.5)·7 = 2.333 m/s
v′2 = 2·3/(3 + 1.5)·7 = 9.333 m/s

Answer

v′2 = 9.333 m/s
12.Momentum & collisions

Answer: v1 = 26.13 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Speed after the collision

V = √(2·μ·g·d) = √(2·0.5·9.81·19.5) = 13.83 m/s

Momentum in the collision

m1·v1 = (m1 + m2)·V → v1 = 1700·13.83/900 = 26.13 m/s

Answer

v1 = 26.13 m/s
(94.05 km/h)
13.Rigid-body rotation

Answer: R = 12.26 N

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Moments about the pin

At the moment of release ω = 0, so there is no centripetal acceleration and the centre accelerates straight down.

m·g·L/2 = (m·L²/3)·α → α = 3g/(2L) = 3·9.81/(2·2.8) = 5.255 rad/s²

Vertical forces

aG = α·L/2 = 7.357 m/s²
m·g − R = m·aG → R = 5·(9.81 − 7.357) = 12.26 N

Answer

R = 12.26 N

R = m·g/4, independent of the length.

14.Rigid-body rotation

Answer: ω = 14.1 rad/s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Height dropped

h = s·sin θ = 3.5·sin 10° = 0.6078 m

Energy balance with rolling

Rolling without slipping: ω = v/r, and friction does no work at the contact point.

m·g·h = ½·m·v²·(1 + 0.5)
v = √(2·9.81·0.6078/1.5) = 2.82 m/s
ω = v/r = 2.82/0.2 = 14.1 rad/s

Answer

ω = 14.1 rad/s
15.Gears & gear trains

Answer: Ft = 2487 N

Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.

Torque on the pinion

ω = 2π·1440/60 = 150.8 rad/s
T = P/ω = 15000/150.8 = 99.47 N·m

Pitch diameter

d = m·N = 4·20 = 80 mm

Tangential force

Ft = 2T/d = 2·99.47/0.08 = 2487 N

Answer

Ft = 2487 N
16.Gears & gear trains

Answer: P = 22.31 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Angle of wrap

θ = 2.739 rad

Slack-side tension

eμθ = e0.9586 = 2.608, T₂ = 1200/2.608 = 460.1 N

Power

P = (1200 − 460.1)·30.16 = 22.31 kW

Answer

P = 22.31 kW
17.Springs & pendulums

Answer: g = 3.701 m/s²

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Solve for g

g = 4π²·L/T² = 4π²·0.6/2.53² = 3.701 m/s²

Answer

g = 3.701 m/s²
18.Springs & pendulums

Answer: vmax = 0.8604 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Equilibrium and amplitude

x₀ = m·g/k = 2·9.81/260 = 0.07546 m = A

Greatest speed

The speed is largest at equilibrium.

ω = √(260/2) = 11.4 rad/s
vmax = A·ω = 0.07546·11.4 = 0.8604 m/s

Answer

vmax = 0.8604 m/s
19.Mechanical vibrations

Answer: fd = 4.083 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(15000/20) = 27.39 rad/s
fn = 27.39/(2π) = 4.359 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 4.359·√(1 − 0.35²) = 4.083 Hz

Answer

fd = 4.083 Hz
20.Mechanical vibrations

Answer: keq = 55 kN/m

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 50 + 5 = 55 kN/m

Answer

keq = 55 kN/m

ExamProblems · examproblems.com/courses/dynamics