Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)10 s30

A car driving at 108 km/h brakes with a constant deceleration of 3 m/s² until it stops. Find the braking distance s.

v₀ = 108 km/ha = −3 m/s²v = 0
s = m
2.KinematicsHard
d = ?

A stone is dropped from rest into a well. The splash is heard 3.9 s after the stone is released. The speed of sound is 343 m/s; ignore air resistance and use g = 9.81 m/s². Find the depth d of the well.

ttotal = 3.9 svsound = 343 m/sg = 9.81 m/s²
d = m
3.Newton’s lawsMedium
35 kg15°F = 150 Nμ = 0.3

A 35 kg sled is pulled across level snow by a rope at 15° above the horizontal with a force of 150 N. The coefficient of kinetic friction is 0.3. Use g = 9.81 m/s². Find the acceleration a of the sled.

m = 35 kgF = 150 Nθ = 15°μ = 0.3g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
4 kg11 kgTF = 40 Nμ = 0.15

Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 40 N pulls the front 11 kg block; the 4 kg block is towed behind. The coefficient of kinetic friction is 0.15 for both blocks. Use g = 9.81 m/s². Find the tension T in the connecting string.

m1 = 4 kgm2 = 11 kgF = 40 Nμ = 0.15g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = 34 m/s60°x = ?

A ball is launched at 60° above horizontal from level ground. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 34 m/sθ = 60°g = 9.81 m/s²
x = m
6.Projectile motionHard
h = 20 mv0​ = 33 m/s15°x = ?

A ball is launched at 15° above horizontal from the top of a 20 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 33 m/sθ = 15°h = 20 mg = 9.81 m/s²
x = m
7.Circular motionMedium
r = 75 mvmax​ = ?

A car takes a flat curve of radius 75 m. The coefficient of static friction between tyres and road is 0.5. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 75 mμs = 0.5g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
r = 1.5 mv = ?

A ball on a string 1.5 m long is swung in a vertical circle. Use g = 9.81 m/s². What is the smallest speed vmin at the top for which the string just stays tight?

r = 1.5 mg = 9.81 m/s²
vmin = m/s
9.Work & energyMedium
45°d = 8 mμ = 0.4

A block slides from rest down a slope at 45° to the horizontal. The coefficient of kinetic friction is 0.4. Find its speed v after it has slid 8 m along the slope.

θ = 45°μ = 0.4d = 8 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
k = 5000 N/m35°μ = 0.253 kg

A spring of stiffness 5000 N/m at the bottom of a 35° slope is compressed by 10 cm against a 3 kg block and released. The coefficient of kinetic friction between block and slope is 0.25. How far d up the slope does the block travel from the release point before it stops? (Ignore the short distance over which the spring pushes, i.e. take friction and gravity over the whole distance d.)

m = 3 kgk = 5000 N/mx = 10 cmθ = 35°μ = 0.25g = 9.81 m/s²
d = m
11.Momentum & collisionsMedium
900 kg10 m/s1300 kg

A 900 kg car moving at 10 m/s runs into a stationary 1300 kg car and the two lock together. How much kinetic energy ΔK is lost in the collision?

m1 = 900 kgv1 = 10 m/sm2 = 1300 kgv2 = 0
ΔK = J
12.Momentum & collisionsHard
3.5 kgv = ?10 g35°L = 1 m

A 10 g bullet is fired horizontally into a 3.5 kg block hanging from light strings 1 m long, and stays in it. The strings swing out to a largest angle of 35° from the vertical. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 10 gM = 3.5 kgL = 1 mθ = 35°g = 9.81 m/s²
v = m/s
13.Rigid-body rotationMedium
n = 2900 rpmTb​ = 65 N·mI = 29.5 kg·m²

A flywheel with a moment of inertia of 29.5 kg·m² spins at 2900 rpm. A brake applies a constant friction torque of 65 N·m. How long t does it take to stop?

I = 29.5 kg·m²n = 2900 rpmTb = 65 N·m
t = s
14.Rigid-body rotationHard
θ = 10°vs = 4.5 m

A hollow sphere starts from rest and rolls without slipping down a slope inclined at 10° to the horizontal. Use g = 9.81 m/s². Find its speed v after it has rolled 4.5 m along the slope.

θ = 10°s = 4.5 mI = (2/3)·m·r²g = 9.81 m/s²
v = m/s
15.Gears & gear trainsMedium
d1​ = 160 mmd2​ = 250 mm1500 rpmT1​ = 800 NT2​ = 320 NP = ?

A belt runs on a 160 mm driving pulley at 1500 rpm. The tension is 800 N on the tight side and 320 N on the slack side. Find the power P transmitted, in kW.

d1 = 160 mmn1 = 1500 rpmT1 = 800 NT2 = 320 N
P = kW
16.Gears & gear trainsHard
A = 15B = 40C = 40D = 48

An 11 kW motor at 2900 rpm drives gear A (15 teeth), which meshes with gear B (40 teeth). Gear C (40 teeth) on the same shaft as B drives gear D (48 teeth) on the output shaft. Each gear mesh has an efficiency of 98%. Find the output torque Tout.

P = 11 kWnin = 2900 rpmA = 15B = 40C = 40D = 48ηmesh = 98%
Tout = N·m
17.Springs & pendulumsMedium
L = ?

How long must a simple pendulum be to have a period of 1.7 s? Use g = 9.81 m/s². Find L.

T = 1.7 sg = 9.81 m/s²
L = m
18.Springs & pendulumsHard
t (s)x (cm)t = ?8.5

A body oscillates in simple harmonic motion with period 2.6 s and amplitude 17 cm. What is the shortest time t it needs to move from its maximum displacement of 17 cm to a displacement of 8.5 cm?

T = 2.6 sA = 17 cmx = 8.5 cm
t = s
19.Mechanical vibrationsMedium
k = 80 kN/mζ = 0.6m = 150 kg

A 150 kg mass on a spring with a stiffness of 80 kN/m has a viscous damper giving a damping ratio of 0.6. Find the damped natural frequency fd of its free vibration in Hz.

m = 150 kgk = 80 kN/mζ = 0.6
fd = Hz
20.Mechanical vibrationsHard
k1​ = 50k2​ = 20m = 5 kg

A 5 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 50 kN/m and the lower one k₂ = 20 kN/m. Find the equivalent stiffness keq of the spring system in kN/m.

m = 5 kgk1 = 50 kN/mk2 = 20 kN/m
keq = kN/m

3Solutions

1.Kinematics

Answer: s = 150 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 108/3.6 = 30 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 30²/(2·3) = 150 m

Answer

s = 150 m
2.Kinematics

Answer: d = 67.29 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Two parts of the time

½·9.81·t₁² = 343·(3.9 − t₁)
4.905·t₁² + 343·t₁ − 1338 = 0

Fall time

Only the positive root is physical.

t₁ = (−343 + √(343² + 4·4.905·1338))/(2·4.905) = 3.704 s

Depth

d = ½·9.81·3.704² = 67.29 m

Answer

d = 67.29 m
3.Newton’s laws

Answer: a = 1.529 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Normal force

N = m·g − F·sin θ = 343.4 − 150·sin 15° = 304.5 N

Horizontal forces

m·a = F·cos θ − μ·N = 144.9 − 91.36
a = 53.53/35 = 1.529 m/s²

Answer

a = 1.529 m/s²
4.Newton’s laws

Answer: T = 10.67 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Whole system

a = (F − μ·(m1 + m2)·g)/(m1 + m2) = (40 − 22.07)/15 = 1.195 m/s²

Rear block alone

T = m1·(a + μ·g) = 4·(1.195 + 1.472) = 10.67 N

Answer

T = 10.67 N

With the same μ on both blocks, friction drops out: T = F·m₁/(m₁ + m₂).

5.Projectile motion

Answer: x = 102.1 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 34·cos 60° = 17 m/s
vy = v0·sin θ = 34·sin 60° = 29.44 m/s

Time in the air

Starting and landing at the same height: t = 2vy/g.

t = 2·29.44/9.81 = 6.003 s

Horizontal distance

x = vx·t = 17·6.003 = 102.1 m

Answer

x = 102.1 m
6.Projectile motion

Answer: x = 97.85 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 33·cos 15° = 31.88 m/s
vy = v0·sin θ = 33·sin 15° = 8.541 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 20 + 8.541·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (8.541 + √(72.95 + 392.4))/9.81 = 3.07 s

Horizontal distance

x = vx·t = 31.88·3.07 = 97.85 m

Answer

x = 97.85 m
7.Circular motion

Answer: vmax = 19.18 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.5·9.81·75) = 19.18 m/s

Answer

vmax = 19.18 m/s (69.05 km/h)
8.Circular motion

Answer: vmin = 3.836 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Tension zero at the top

m·g = m·v²/r → v = √(g·r) = √(9.81·1.5) = 3.836 m/s

Answer

vmin = 3.836 m/s
9.Work & energy

Answer: v = 8.16 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy balance along the slope

The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.

½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·8·(0.7071 − 0.4·0.7071)) = 8.16 m/s

Answer

v = 8.16 m/s
10.Work & energy

Answer: d = 1.091 m

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Spring energy

x = 10 cm = 0.1 m
½kx² = ½·5000·0.1² = 25 J

Energy balance along the slope

m·g = 3·9.81 = 29.43 N
½kx² = mg·d·(sin θ + μ·cos θ)
d = 25/(29.43·(0.5736 + 0.25·0.8192)) = 1.091 m

Answer

d = 1.091 m
11.Momentum & collisions

Answer: ΔK = 26591 J

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Common velocity

v′ = m1·v1/(m1 + m2) = 900·10/2200 = 4.091 m/s

Kinetic energy before and after

Kbefore = ½·900·10² = 45000 J
Kafter = ½·2200·4.091² = 18409 J

Energy lost

ΔK = 45000 − 18409 = 26591 J

Answer

ΔK = 26591 J

The lost energy goes into deformation, heat and sound.

12.Momentum & collisions

Answer: v = 661.2 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Rise of the block

h = L·(1 − cos θ) = 1·(1 − cos 35°) = 0.1808 m

Speed after impact

V = √(2·9.81·0.1808) = 1.884 m/s

Collision

v = (m + M)·V/m = 3.51·1.884/0.01 = 661.2 m/s

Answer

v = 661.2 m/s
13.Rigid-body rotation

Answer: t = 137.8 s

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·2900/60 = 303.7 rad/s

Deceleration and time

α = Tb/I = 65/29.5 = 2.203 rad/s²
t = ω/α = 303.7/2.203 = 137.8 s

Answer

t = 137.8 s
14.Rigid-body rotation

Answer: v = 3.033 m/s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Height dropped

h = s·sin θ = 4.5·sin 10° = 0.7814 m

Energy balance with rolling

Rolling without slipping: ω = v/r, and friction does no work at the contact point.

m·g·h = ½·m·v²·(1 + 0.6667)
v = √(2·9.81·0.7814/1.667) = 3.033 m/s

Answer

v = 3.033 m/s
15.Gears & gear trains

Answer: P = 6.032 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Belt speed

v = 12.57 m/s

Power

P = (800 − 320)·12.57 = 6032 W = 6.032 kW

Answer

P = 6.032 kW
16.Gears & gear trains

Answer: Tout = 111.3 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Output speed

nout = 2900·(15/40)·(40/48) = 906.3 rpm
ωout = 2π·906.3/60 = 94.9 rad/s

Output power and torque

Pout = 11000·0.98² = 10564 W
Tout = Pout/ωout = 10564/94.9 = 111.3 N·m

Answer

Tout = 111.3 N·m
17.Springs & pendulums

Answer: L = 0.7181 m

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Solve for the length

L = g·(T/2π)² = 9.81·(1.7/2π)² = 0.7181 m

Answer

L = 0.7181 m
18.Springs & pendulums

Answer: t = 0.4333 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = 2π/T = 2π/2.6 = 2.417 rad/s

Solve for the time

0.5 = cos(ω·t) → ω·t = arccos(0.5) = 1.047 rad
t = 1.047/2.417 = 0.4333 s

Answer

t = 0.4333 s
19.Mechanical vibrations

Answer: fd = 2.94 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(80000/150) = 23.09 rad/s
fn = 23.09/(2π) = 3.676 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 3.676·√(1 − 0.6²) = 2.94 Hz

Answer

fd = 2.94 Hz
20.Mechanical vibrations

Answer: keq = 14.29 kN/m

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.

1/keq = 1/50 + 1/20 → keq = 50·20/(50 + 20) = 14.29 kN/m

Answer

keq = 14.29 kN/m

ExamProblems · examproblems.com/courses/dynamics