Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)1.736 s13.89

A car driving at 50 km/h brakes with a constant deceleration of 8 m/s² until it stops. Find the braking distance s.

v₀ = 50 km/ha = −8 m/s²v = 0
s = m
2.KinematicsHard
v₀ = 14 m/s25 m

A ball is thrown straight up at 14 m/s from the edge of a roof 25 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 14 m/sh₀ = 25 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
θ = 25°a = ?m = 14 kg

A 14 kg block slides down a slope at 25° to the horizontal. The coefficient of kinetic friction is 0.3. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 14 kgθ = 25°μ = 0.3g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 3 kg8.5 kgθ = 25°

A 3 kg block on a ramp at 25° is connected by a light string over a frictionless pulley at the top of the ramp to a hanging 8.5 kg mass. The hanging mass moves down. The coefficient of kinetic friction between block and ramp is 0.25. Use g = 9.81 m/s². Find the acceleration a of the system.

m1 = 3 kgm2 = 8.5 kgθ = 25°μ = 0.25g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
v0​ = 18 m/s45°x = ?

A ball is launched at 45° above horizontal from level ground. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 18 m/sθ = 45°g = 9.81 m/s²
x = m
6.Projectile motionHard
h = 40 mv0​ = 31 m/s40°H = ?

A ball is launched at 31 m/s and 40° above the horizontal from the top of a 40 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the greatest height H above the ground at the foot of the cliff.

v₀ = 31 m/sθ = 40°h = 40 mg = 9.81 m/s²
H = m
7.Circular motionMedium
θ = 18°to centrev = ?

A curve of radius 400 m is banked at 18°. At what speed v can a car take it with no friction needed at all? Use g = 9.81 m/s².

r = 400 mθ = 18°g = 9.81 m/s²
v = m/s
8.Circular motionHard
r = 1.2 mv = ?

A ball on a string 1.2 m long is swung in a vertical circle. Use g = 9.81 m/s². What is the smallest speed vmin at the top for which the string just stays tight?

r = 1.2 mg = 9.81 m/s²
vmin = m/s
9.Work & energyMedium
25°d = 2 mμ = 0.1

A block slides from rest down a slope at 25° to the horizontal. The coefficient of kinetic friction is 0.1. Find its speed v after it has slid 2 m along the slope.

θ = 25°μ = 0.1d = 2 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
4 kg4 kgμ = 0.4d = 3 m

A 4 kg block rests on a rough horizontal table (μ = 0.4). A light string runs from it over a smooth pulley at the edge of the table to a hanging 4 kg block. The system is released from rest. Find the speed v of the blocks after the hanging block has dropped 3 m.

m1 = 4 kgm2 = 4 kgμ = 0.4d = 3 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
4.5 kg11 m/s2.5 kg

A 4.5 kg glider moving at 11 m/s makes a perfectly elastic head-on collision with a 2.5 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).

m1 = 4.5 kgm2 = 2.5 kgv1 = 11 m/sv2 = 0
v′1 = m/s
12.Momentum & collisionsHard
1000 kgv1​ = ?1500 kg

A 1000 kg car runs into a parked 1500 kg car. The wrecks lock together and skid 14 m before stopping. The coefficient of kinetic friction between tyres and road is 0.5. Use g = 9.81 m/s². Find the speed v1 of the first car just before the collision.

m1 = 1000 kgm2 = 1500 kgd = 14 mμ = 0.5g = 9.81 m/s²
v1 = m/s
13.Rigid-body rotationMedium
14.5 kgaαM = 6.5 kgR = 0.1 m

A 14.5 kg block hangs from a light cord wrapped around a pulley, a uniform solid disc of mass 6.5 kg and radius 0.1 m that turns on a frictionless horizontal axle. The block is released from rest. Use g = 9.81 m/s². Find the tension T in the cord.

m = 14.5 kgM = 6.5 kgR = 0.1 mg = 9.81 m/s²
T = N
14.Rigid-body rotationHard
disc: 27 kgring: 7 kgn1​ = 550 rpm

A uniform solid disc (mass 27 kg, radius 0.4 m) spins freely at 550 rpm about a vertical frictionless shaft. A thin ring of mass 7 kg and the same radius is dropped onto it from rest, centred on the shaft, and the two quickly spin together. How much kinetic energy ΔE is lost in the process?

Mdisc = 27 kgMring = 7 kgR = 0.4 mn1 = 550 rpm
ΔE = J
15.Gears & gear trainsMedium
N1​ = 20, m = 3 mm

A 7.5 kW motor running at 1440 rpm drives a pinion with 20 teeth and a module of 3 mm. Find the tangential force Ft on the pinion teeth.

P = 7.5 kWn = 1440 rpmN1 = 20m = 3 mm
Ft = N
16.Gears & gear trainsHard
Ns​ = 18nr​ = ?Np​ = 15carrier fixed

In a planetary gear set the sun gear has 18 teeth and each planet gear has 15 teeth. The planet carrier is held fixed and the sun is driven at 1800 rpm. Find the speed nr of the ring gear (magnitude).

Ns = 18Np = 15ns = 1800 rpm
nr = rpm
17.Springs & pendulumsMedium
L = 0.6 mT = 3.82 s

An astronaut on another planet finds that a simple pendulum 0.6 m long has a period of 3.82 s for small swings. Find the gravitational acceleration g on that planet.

L = 0.6 mT = 3.82 s
g = m/s²
18.Springs & pendulumsHard
0.4 kgk = 30 N/mA = 14 cm

A 0.4 kg mass on a spring with k = 30 N/m is pulled 14 cm from equilibrium and released. Find its maximum speed vmax.

m = 0.4 kgk = 30 N/mA = 14 cm
vmax = m/s
19.Mechanical vibrationsMedium
k = 10 kN/mc = 90 N·s/mm = 5 kg

A 5 kg mass is supported by a spring with a stiffness of 10 kN/m and a viscous damper with a damping coefficient of 90 N·s/m. Find the damping ratio ζ.

m = 5 kgk = 10 kN/mc = 90 N·s/m
ζ =
20.Mechanical vibrationsHard
k1​ = 12k2​ = 100m = 10 kg

A 10 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 12 kN/m and k₂ = 100 kN/m. The mass stays level. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 10 kgk1 = 12 kN/mk2 = 100 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: s = 12.06 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 50/3.6 = 13.89 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 13.89²/(2·8) = 12.06 m

Answer

s = 12.06 m
2.Kinematics

Answer: t = 4.098 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−25 = 14·t − ½·9.81·t²
4.905·t² − 14·t − 25 = 0

Solve the quadratic

Only the positive root is physical.

t = (14 + √(14² + 2·9.81·25))/9.81 = 4.098 s

Answer

t = 4.098 s
3.Newton’s laws

Answer: a = 1.479 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 25° − 0.3·cos 25°) = 9.81·(0.4226 − 0.2719) = 1.479 m/s²

Answer

a = 1.479 m/s²
4.Newton’s laws

Answer: a = 5.589 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the string

m₂·g = 83.39 N
m₁·g·sin θ = 12.44 N
μ·m₁·g·cos θ = 6.668 N

Acceleration of the system

a = (83.39 − 12.44 − 6.668)/11.5 = 5.589 m/s²

Answer

a = 5.589 m/s²
5.Projectile motion

Answer: x = 33.03 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 18·cos 45° = 12.73 m/s
vy = v0·sin θ = 18·sin 45° = 12.73 m/s

Time in the air

Starting and landing at the same height: t = 2vy/g.

t = 2·12.73/9.81 = 2.595 s

Horizontal distance

x = vx·t = 12.73·2.595 = 33.03 m

Answer

x = 33.03 m
6.Projectile motion

Answer: H = 60.24 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Vertical launch speed

vy = 31·sin 40° = 19.93 m/s

Rise above the cliff

Δh = vy²/(2g) = 19.93²/(2·9.81) = 20.24 m

Height above the ground

H = 40 + 20.24 = 60.24 m

Answer

H = 60.24 m
7.Circular motion

Answer: v = 35.71 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Force balance

N·cos θ = m·g, N·sin θ = m·v²/r → tan θ = v²/(r·g)

Speed

v = √(r·g·tan θ) = √(400·9.81·tan 18°) = 35.71 m/s

Answer

v = 35.71 m/s
(128.5 km/h)
8.Circular motion

Answer: vmin = 3.431 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Tension zero at the top

m·g = m·v²/r → v = √(g·r) = √(9.81·1.2) = 3.431 m/s

Answer

vmin = 3.431 m/s
9.Work & energy

Answer: v = 3.609 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy balance along the slope

The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.

½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·2·(0.4226 − 0.1·0.9063)) = 3.609 m/s

Answer

v = 3.609 m/s
10.Work & energy

Answer: v = 4.202 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy released and lost

m₂g·d = 39.24·3 = 117.7 J
μ·m₁g·d = 0.4·39.24·3 = 47.09 J

Kinetic energy of both blocks

½(m₁ + m₂)v² = 70.63 → v = √(2·70.63/8) = 4.202 m/s

Answer

v = 4.202 m/s
11.Momentum & collisions

Answer: v′1 = 3.143 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (4.5 − 2.5)/(4.5 + 2.5)·11 = 3.143 m/s
v′2 = 2·4.5/(4.5 + 2.5)·11 = 14.14 m/s

Answer

v′1 = 3.143 m/s
12.Momentum & collisions

Answer: v1 = 29.3 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Speed after the collision

V = √(2·μ·g·d) = √(2·0.5·9.81·14) = 11.72 m/s

Momentum in the collision

m1·v1 = (m1 + m2)·V → v1 = 2500·11.72/1000 = 29.3 m/s

Answer

v1 = 29.3 m/s
(105.5 km/h)
13.Rigid-body rotation

Answer: T = 26.04 N

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Block and pulley

block: m·g − T = m·a
pulley: T·R = I·α = ½·M·R²·(a/R) → T = ½·M·a

Acceleration

a = m·g/(m + M/2) = 14.5·9.81/(14.5 + 3.25) = 8.014 m/s²

Tension

T = m·(g − a) = 14.5·(9.81 − 8.014) = 26.04 N

Answer

T = 26.04 N
14.Rigid-body rotation

Answer: ΔE = 1223 J

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Moments of inertia

I1 = ½·27·0.4² = 2.16 kg·m²
I2 = 7·0.4² = 1.12 kg·m²

Conservation of angular momentum

n2 = n1·I1/(I1 + I2) = 550·2.16/3.28 = 362.2 rpm

Kinetic energy before and after

E1 = ½·2.16·57.6² = 3583 J
E2 = ½·3.28·37.93² = 2359 J
ΔE = 3583 − 2359 = 1223 J

Answer

ΔE = 1223 J
15.Gears & gear trains

Answer: Ft = 1658 N

Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.

Torque on the pinion

ω = 2π·1440/60 = 150.8 rad/s
T = P/ω = 7500/150.8 = 49.74 N·m

Pitch diameter

d = m·N = 3·20 = 60 mm

Tangential force

Ft = 2T/d = 2·49.74/0.06 = 1658 N

Answer

Ft = 1658 N
16.Gears & gear trains

Answer: nr = 675 rpm

Planetary gear sets: the speeds of sun, ring and carrier are linked by the Willis equation (ns − nc)/(nr − nc) = −Nr/Ns: seen from the carrier, the set is an ordinary train with the planets as idlers. Holding one member fixed turns the set into a single-ratio reducer.

Ring gear teeth

Nr = Ns + 2·Np = 18 + 2·15 = 48

Willis equation with the carrier fixed

With nc = 0 the sun drives the ring through the planets, which act as idlers.

nr = −ns·Ns/Nr = −1800·18/48 = −675 rpm
|nr| = 675 rpm

Answer

nr = 675 rpm

The ring turns opposite to the sun.

17.Springs & pendulums

Answer: g = 1.623 m/s²

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Solve for g

g = 4π²·L/T² = 4π²·0.6/3.82² = 1.623 m/s²

Answer

g = 1.623 m/s²
18.Springs & pendulums

Answer: vmax = 1.212 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(30/0.4) = 8.66 rad/s

Maximum speed

vmax = A·ω = 0.14·8.66 = 1.212 m/s

Answer

vmax = 1.212 m/s
19.Mechanical vibrations

Answer: ζ = 0.2012

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(10000·5) = 447.2 N·s/m

Damping ratio

ζ = c/cc = 90/447.2 = 0.2012

Answer

ζ = 0.2012

ζ < 1, so the system is underdamped and oscillates as it decays.

20.Mechanical vibrations

Answer: fn = 16.84 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 12 + 100 = 112 kN/m

Natural frequency

ωn = √(112000/10) = 105.8 rad/s
fn = 105.8/(2π) = 16.84 Hz

Answer

fn = 16.84 Hz

ExamProblems · examproblems.com/courses/dynamics