Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)1.2 s13.89

A driver moving at 50 km/h sees an obstacle. Her reaction time is 1.2 s, after which the car brakes with a constant deceleration of 7.5 m/s². Find the total stopping distance d from the moment she sees the obstacle.

v₀ = 50 km/htr = 1.2 sa = −7.5 m/s²
d = m
2.KinematicsHard
AB: 27 m/s30 m

Ball A is dropped from rest from a height of 30 m. At the same instant ball B is thrown straight up from the ground directly below at 27 m/s. Ignore air resistance and use g = 9.81 m/s². When do the balls meet? Find t.

H = 30 mv0B = 27 m/sg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
15 kg15°F = 70 Nμ = 0.2

A 15 kg sled is pulled across level snow by a rope at 15° above the horizontal with a force of 70 N. The coefficient of kinetic friction is 0.2. Use g = 9.81 m/s². Find the acceleration a of the sled.

m = 15 kgF = 70 Nθ = 15°μ = 0.2g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
θ = 35°blockv₀ = 10 m/s

A block is given a push so that it starts sliding up a ramp at 35° with a speed of 10 m/s. The coefficient of kinetic friction is 0.25. Use g = 9.81 m/s². How far d along the ramp does it slide before it stops?

v₀ = 10 m/sθ = 35°μ = 0.25g = 9.81 m/s²
d = m
5.Projectile motionMedium
v0​ = 36 m/s60°range

A ball is launched at 60° above horizontal from level ground. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 36 m/sθ = 60°g = 9.81 m/s²
t = s
6.Projectile motionHard
h = 35 mv0​ = 35 m/s35°x = ?

A ball is launched at 35° above horizontal from the top of a 35 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 35 m/sθ = 35°h = 35 mg = 9.81 m/s²
x = m
7.Circular motionMedium
r = 2.1 mn = ?

In a fairground rotor, riders stand against the wall of a vertical cylinder of radius 2.1 m. When it spins fast enough the floor drops away and friction holds them up. The coefficient of static friction is 0.5. Use g = 9.81 m/s². Find the smallest rotation rate n in revolutions per minute.

r = 2.1 mμs = 0.5g = 9.81 m/s²
n = rpm
8.Circular motionHard
θ = 10°to centrevmin​ = ?

A curve of radius 110 m is banked at 10°, and the coefficient of static friction between tyres and road is 0.1. Use g = 9.81 m/s². Find the lowest speed vmin at which a car can take the curve without sliding down the bank.

r = 110 mθ = 10°μs = 0.1g = 9.81 m/s²
vmin = m/s
9.Work & energyMedium
45°d = 19 mμ = 0.1

A 4 kg block slides 19 m down a slope at 45° to the horizontal, with a coefficient of kinetic friction of 0.1. Find the work Wf done against friction.

m = 4 kgθ = 45°μ = 0.1d = 19 mg = 9.81 m/s²
Wf = J
10.Work & energyHard
h = 1.5 mL = 1 mμ = 0.25k = 500 N/m

A 1 kg block is released from rest at height 1.5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 1 m long (μ = 0.25) and then runs onto a spring (k = 500 N/m) on a smooth surface. Find the maximum compression x of the spring.

m = 1 kgh = 1.5 mL = 1 mμ = 0.25k = 500 N/mg = 9.81 m/s²
x = cm
11.Momentum & collisionsMedium
1 kg11 m/s5 kg

A 1 kg glider moving at 11 m/s makes a perfectly elastic head-on collision with a 5 kg glider at rest on a frictionless track. Find the velocity v′2 of the second glider after the collision.

m1 = 1 kgm2 = 5 kgv1 = 11 m/sv2 = 0
v′2 = m/s
12.Momentum & collisionsHard
15 m/s17 m/s

A 0.45 kg ball hits a wall at 15 m/s and bounces straight back at 17 m/s. The contact lasts 5 ms. Find the average force Favg of the wall on the ball.

m = 0.45 kgvin = 15 m/svout = 17 m/sΔt = 5 ms
Favg = N
13.Rigid-body rotationMedium
0 → 2400 rpmI = 25 kg·m²

A motor brings a flywheel with a moment of inertia of 25 kg·m² from rest up to 2400 rpm in 20 s. Ignoring losses, find the average power Pavg it delivers, in kW.

I = 25 kg·m²n = 2400 rpmt = 20 s
Pavg = kW
14.Rigid-body rotationHard
4.5 m/sω

A thin hoop of mass 3.5 kg rolls without slipping at 4.5 m/s. Find its rotational kinetic energy Erot.

m = 3.5 kgv = 4.5 m/sI = m·r²
Erot = J
15.Gears & gear trainsMedium
Nw​ = 48z = 1, 2900 rpm

A worm with 1 start(s) turns at 2900 rpm and drives a worm wheel with 48 teeth. Find the speed nw of the wheel.

z = 1Nw = 48n = 2900 rpm
nw = rpm
16.Gears & gear trainsHard
A = 50B = 80C = 48D = 72

In a compound gear train, gear A (50 teeth) on the input shaft turning at 2900 rpm drives gear B (80 teeth). Gear C (48 teeth) is fixed to the same shaft as B and drives gear D (72 teeth) on the output shaft. Find the output speed nout.

nin = 2900 rpmA = 50B = 80C = 48D = 72
nout = rpm
17.Springs & pendulumsMedium
L = 1 m

A simple pendulum has a length of 1 m. Use g = 9.81 m/s². Find its period T for small swings.

L = 1 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
mk = 260 N/mA = 15 cmx = 5 cm

A mass on a spring with k = 260 N/m oscillates on a frictionless surface with an amplitude of 15 cm. Find its kinetic energy K when it is 5 cm from equilibrium.

k = 260 N/mA = 15 cmx = 5 cm
K = J
19.Mechanical vibrationsMedium
k = 80 kN/mc = 1010 N·s/mm = 500 kg

A 500 kg mass is supported by a spring with a stiffness of 80 kN/m and a viscous damper with a damping coefficient of 1010 N·s/m. Find the damping ratio ζ.

m = 500 kgk = 80 kN/mc = 1010 N·s/m
ζ =
20.Mechanical vibrationsHard
k1​ = 50k2​ = 40k3​ = 12m = 40 kg

A 40 kg mass hangs from spring k₃ = 12 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 50 kN/m and k₂ = 40 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 40 kgk1 = 50 kN/mk2 = 40 kN/mk3 = 12 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: d = 29.53 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 50/3.6 = 13.89 m/s

Reaction distance

d1 = v₀·tr = 13.89·1.2 = 16.67 m

Braking distance

d2 = v₀²/(2a) = 13.89²/(2·7.5) = 12.86 m

Total

d = 16.67 + 12.86 = 29.53 m

Answer

d = 29.53 m
2.Kinematics

Answer: t = 1.111 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Meeting time

Up is positive, the ground is y = 0.

30 − ½g·t² = 27·t − ½g·t² → t = 30/27 = 1.111 s

Answer

t = 1.111 s
3.Newton’s laws

Answer: a = 2.787 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Normal force

N = m·g − F·sin θ = 147.2 − 70·sin 15° = 129 N

Horizontal forces

m·a = F·cos θ − μ·N = 67.61 − 25.81
a = 41.81/15 = 2.787 m/s²

Answer

a = 2.787 m/s²
4.Newton’s laws

Answer: d = 6.548 m

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Deceleration

Both forces point down the slope; the mass cancels.

a = 9.81·(sin 35° + 0.25·cos 35°) = 7.636 m/s²

Distance

d = v₀²/(2a) = 10²/(2·7.636) = 6.548 m

Answer

d = 6.548 m
5.Projectile motion

Answer: t = 6.356 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 36·cos 60° = 18 m/s
vy = v0·sin θ = 36·sin 60° = 31.18 m/s

Time in the air

Starting and landing at the same height: t = 2vy/g.

t = 2·31.18/9.81 = 6.356 s

Answer

t = 6.356 s
6.Projectile motion

Answer: x = 155.1 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 35·cos 35° = 28.67 m/s
vy = v0·sin θ = 35·sin 35° = 20.08 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 35 + 20.08·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (20.08 + √(403 + 686.7))/9.81 = 5.411 s

Horizontal distance

x = vx·t = 28.67·5.411 = 155.1 m

Answer

x = 155.1 m
7.Circular motion

Answer: n = 29.19 rpm

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces on a rider

N = m·ω²·r
μ·N = m·g → μ·ω²·r = g

Angular speed

ω = √(g/(μ·r)) = √(9.81/(0.5·2.1)) = 3.057 rad/s

Rotation rate

n = ω·60/(2π) = 29.19 rpm

Answer

n = 29.19 rpm
8.Circular motion

Answer: vmin = 8.997 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Force balances

Friction points up the slope.

N·(sin θ − μ·cos θ) = m·v²/r
N·(cos θ + μ·sin θ) = m·g

Speed

v = √(110·9.81·0.07517/1.002) = 8.997 m/s

Answer

vmin = 8.997 m/s
(32.39 km/h)
9.Work & energy

Answer: Wf = 52.72 J

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Friction force

N = mg·cos θ = 39.24·0.7071 = 27.75 N
F = μN = 0.1·27.75 = 2.775 N

Work against friction

Wf = F·d = 2.775·19 = 52.72 J

Answer

Wf = 52.72 J
10.Work & energy

Answer: x = 22.15 cm

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 9.81·(1.5 − 0.25·1) = 12.26 J

Maximum compression

½kx² = 12.26 → x = √(2·12.26/500) = 0.2215 m = 22.15 cm

Answer

x = 22.15 cm
11.Momentum & collisions

Answer: v′2 = 3.667 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (1 − 5)/(1 + 5)·11 = −7.333 m/s
v′2 = 2·1/(1 + 5)·11 = 3.667 m/s

Answer

v′2 = 3.667 m/s
12.Momentum & collisions

Answer: Favg = 2880 N

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.45·(17 + 15) = 14.4 N·s

Average force

Favg = J/Δt = 14.4/0.005 = 2880 N

Answer

Favg = 2880 N
13.Rigid-body rotation

Answer: Pavg = 39.48 kW

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·2400/60 = 251.3 rad/s

Energy

E = ½·I·ω² = ½·25·251.3² = 789568 J

Average power

Pavg = E/t = 789568/20 = 39478 W = 39.48 kW

Answer

Pavg = 39.48 kW
14.Rigid-body rotation

Answer: Erot = 35.44 J

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Translational and rotational parts

Etrans = ½·m·v² = ½·3.5·4.5² = 35.44 J
Erot = ½·I·ω² = ½·1·m·r²·(v/r)² = 1·35.44 = 35.44 J

Answer

Erot = 35.44 J
15.Gears & gear trains

Answer: nw = 60.42 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Wheel speed

nw = n·z/Nw = 2900·1/48 = 60.42 rpm

Answer

nw = 60.42 rpm
16.Gears & gear trains

Answer: nout = 1208 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

First stage

nB = 2900·50/80 = 1813 rpm = nC

Second stage

nout = 1813·48/72 = 1208 rpm

Answer

nout = 1208 rpm

total ratio = 2.4 : 1

17.Springs & pendulums

Answer: T = 2.006 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Pendulum period

T = 2π·√(1/9.81) = 2.006 s

Answer

T = 2.006 s
18.Springs & pendulums

Answer: K = 2.6 J

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Total energy

E = ½·k·A² = ½·260·0.15² = 2.925 J

Spring energy at x

U = ½·k·x² = ½·260·0.05² = 0.325 J

Kinetic energy

K = 2.925 − 0.325 = 2.6 J

Answer

K = 2.6 J
19.Mechanical vibrations

Answer: ζ = 0.07985

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(80000·500) = 12649 N·s/m

Damping ratio

ζ = c/cc = 1010/12649 = 0.07985

Answer

ζ = 0.07985

ζ < 1, so the system is underdamped and oscillates as it decays.

20.Mechanical vibrations

Answer: fn = 2.589 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 50 + 40 = 90 kN/m
keq = 90·12/(90 + 12) = 10.59 kN/m

Natural frequency

ωn = √(10588/40) = 16.27 rad/s
fn = 16.27/(2π) = 2.589 Hz

Answer

fn = 2.589 Hz

ExamProblems · examproblems.com/courses/dynamics