Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
a = ?s = 1100 m

A plane needs a speed of 240 km/h to take off and the usable runway is 1100 m long. Starting from rest, what constant acceleration a does it need?

v₀ = 0v = 240 km/hs = 1100 m
a = m/s²
2.KinematicsHard
v₀ = 6 m/s25 m

A ball is thrown straight up at 6 m/s from the edge of a roof 25 m above the ground. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax above the ground.

v₀ = 6 m/sh₀ = 25 mg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
boxv₀ = 4 m/sμ = ?

A box slides across a level floor with an initial speed of 4 m/s and comes to rest after 16 m. Use g = 9.81 m/s². Find the coefficient of kinetic friction μ.

v₀ = 4 m/sd = 16 mg = 9.81 m/s²
μ =
4.Newton’s lawsHard
2 kg8 kgTF = 110 Nμ = 0.1

Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 110 N pulls the front 8 kg block; the 2 kg block is towed behind. The coefficient of kinetic friction is 0.1 for both blocks. Use g = 9.81 m/s². Find the tension T in the connecting string.

m1 = 2 kgm2 = 8 kgF = 110 Nμ = 0.1g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = 28 m/s35°range

A ball is launched at 35° above horizontal from level ground. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 28 m/sθ = 35°g = 9.81 m/s²
t = s
6.Projectile motionHard
2 mv0​ = 21 m/s65°x = ?

A ball is thrown from ground level at 21 m/s and 65° above the horizontal. It lands on the flat roof of a building 2 m high, on its way down. Ignore air resistance and use g = 9.81 m/s². Find the horizontal distance x from the launch point to where it lands.

v₀ = 21 m/sθ = 65°hroof = 2 mg = 9.81 m/s²
x = m
7.Circular motionMedium
r = 65 m14 m/s

A 1300 kg car drives over the top of a hump in the road at 14 m/s. The top of the hump is a circular arc of radius 65 m. Use g = 9.81 m/s². Find the normal force N of the road on the car at the top.

m = 1300 kgv = 14 m/sr = 65 mg = 9.81 m/s²
N = N
8.Circular motionHard
θ = 20°to centrevmin​ = ?

A curve of radius 70 m is banked at 20°, and the coefficient of static friction between tyres and road is 0.2. Use g = 9.81 m/s². Find the lowest speed vmin at which a car can take the curve without sliding down the bank.

r = 70 mθ = 20°μs = 0.2g = 9.81 m/s²
vmin = m/s
9.Work & energyMedium
30°d = 16 mμ = 0.3

A block slides from rest down a slope at 30° to the horizontal. The coefficient of kinetic friction is 0.3. Find its speed v after it has slid 16 m along the slope.

θ = 30°μ = 0.3d = 16 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
h = 3.5 mL = 2.5 mμ = 0.3k = 1000 N/m

A 2 kg block is released from rest at height 3.5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 2.5 m long (μ = 0.3) and then runs onto a spring (k = 1000 N/m) on a smooth surface. Find the speed v of the block when it reaches the spring.

m = 2 kgh = 3.5 mL = 2.5 mμ = 0.3k = 1000 N/mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
5 kg48 m/s12 kgv′2​ = ?

A 17 kg projectile moving horizontally at 28 m/s explodes into two fragments that move along the same line. The 5 kg fragment continues forwards at 48 m/s. Find the velocity v′2 of the 12 kg fragment (positive in the original direction).

M = 17 kgu = 28 m/sm1 = 5 kgv′1 = 48 m/sm2 = 12 kg
v′2 = m/s
12.Momentum & collisionsHard
1 kgv = ?20 g40°L = 1.5 m

A 20 g bullet is fired horizontally into a 1 kg block hanging from light strings 1.5 m long, and stays in it. The strings swing out to a largest angle of 40° from the vertical. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 20 gM = 1 kgL = 1.5 mθ = 40°g = 9.81 m/s²
v = m/s
13.Rigid-body rotationMedium
n = 3000 rpmTb​ = 90 N·mI = 2.5 kg·m²

A flywheel with a moment of inertia of 2.5 kg·m² spins at 3000 rpm. A brake applies a constant friction torque of 90 N·m. How many revolutions N does the flywheel make before it stops?

I = 2.5 kg·m²n = 3000 rpmTb = 90 N·m
N = rev
14.Rigid-body rotationHard
θ = 40°vs = 5 m

A solid sphere starts from rest and rolls without slipping down a slope inclined at 40° to the horizontal. Use g = 9.81 m/s². Find its speed v after it has rolled 5 m along the slope.

θ = 40°s = 5 mI = (2/5)·m·r²g = 9.81 m/s²
v = m/s
15.Gears & gear trainsMedium
N1​ = 15N2​ = 45

A 1.1 kW motor running at 1450 rpm drives a pinion with 15 teeth, which meshes with a gear with 45 teeth. The gear pair has an efficiency of 98%. Find the torque T1 on the motor shaft.

P = 1.1 kWn1 = 1450 rpmN1 = 15N2 = 45η = 98%
T1 = N·m
16.Gears & gear trainsHard
A = 24B = 72C = 18D = ?

In a compound gear train, gear A (24 teeth) on the input shaft turns at 1440 rpm and drives gear B (72 teeth). Gear C (18 teeth) is fixed to the same shaft as B and drives gear D on the output shaft. The output must turn at 172.8 rpm. How many teeth ND must gear D have?

nin = 1440 rpmA = 24B = 72C = 18nout = 172.8 rpm
ND =
17.Springs & pendulumsMedium
t (s)x (cm)1.15 s

A 3.6 kg mass on a spring with k = 350 N/m is pulled 8 cm in the positive direction and released from rest at t = 0. Find its velocity v at t = 1.15 s (with sign).

m = 3.6 kgk = 350 N/mA = 8 cmt = 1.15 s
v = m/s
18.Springs & pendulumsHard
0.9 kgk = 160 N/mA = 13 cm

A 0.9 kg mass on a spring with k = 160 N/m is pulled 13 cm from equilibrium and released. Find the total energy E of the oscillation.

m = 0.9 kgk = 160 N/mA = 13 cm
E = J
19.Mechanical vibrationsMedium
tx15 mm5 cycles0.6 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 15 mm is followed 5 cycles later by a peak of 0.6 mm. Find the damping ratio ζ.

x0 = 15 mmx5 = 0.6 mmn = 5
ζ =
20.Mechanical vibrationsHard
k1​ = 100k2​ = 15m = 20 kg

A 20 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 100 kN/m and k₂ = 15 kN/m. The mass stays level. Find the equivalent stiffness keq of the spring system in kN/m.

m = 20 kgk1 = 100 kN/mk2 = 15 kN/m
keq = kN/m

3Solutions

1.Kinematics

Answer: a = 2.02 m/s²

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v = 240/3.6 = 66.67 m/s

Acceleration

a = v²/(2s) = 66.67²/(2·1100) = 2.02 m/s²

Answer

a = 2.02 m/s²
2.Kinematics

Answer: hmax = 26.83 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Rise above the roof

0 = v₀² − 2·g·Δh → Δh = 6²/(2·9.81) = 1.835 m

Height above the ground

hmax = 25 + 1.835 = 26.83 m

Answer

hmax = 26.83 m
3.Newton’s laws

Answer: μ = 0.05097

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Deceleration

a = v₀²/(2d) = 4²/(2·16) = 0.5 m/s²

Friction coefficient

μ·m·g = m·a → μ = a/g = 0.5/9.81 = 0.05097

Answer

μ = 0.05097
4.Newton’s laws

Answer: T = 22 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Whole system

a = (F − μ·(m1 + m2)·g)/(m1 + m2) = (110 − 9.81)/10 = 10.02 m/s²

Rear block alone

T = m1·(a + μ·g) = 2·(10.02 + 0.981) = 22 N

Answer

T = 22 N

With the same μ on both blocks, friction drops out: T = F·m₁/(m₁ + m₂).

5.Projectile motion

Answer: t = 3.274 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 28·cos 35° = 22.94 m/s
vy = v0·sin θ = 28·sin 35° = 16.06 m/s

Time in the air

Starting and landing at the same height: t = 2vy/g.

t = 2·16.06/9.81 = 3.274 s

Answer

t = 3.274 s
6.Projectile motion

Answer: x = 33.48 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

vx = 8.875 m/s, vy = 19.03 m/s

Time to land on the roof

Larger root: the ball is descending.

2 = 19.03·t − 4.905·t²
t = (19.03 + √(19.03² − 2·9.81·2))/9.81 = 3.772 s

Horizontal distance

x = vx·t = 8.875·3.772 = 33.48 m

Answer

x = 33.48 m
7.Circular motion

Answer: N = 8833 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the top

Towards the centre (down) is positive.

m·g − N = m·v²/r
N = 1300·9.81 − 1300·14²/65 = 12753 − 3920 = 8833 N

Answer

N = 8833 N

The car feels lighter: the road pushes up less than its weight.

8.Circular motion

Answer: vmin = 10.24 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Force balances

Friction points up the slope.

N·(sin θ − μ·cos θ) = m·v²/r
N·(cos θ + μ·sin θ) = m·g

Speed

v = √(70·9.81·0.1541/1.008) = 10.24 m/s

Answer

vmin = 10.24 m/s
(36.88 km/h)
9.Work & energy

Answer: v = 8.683 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy balance along the slope

The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.

½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·16·(0.5 − 0.3·0.866)) = 8.683 m/s

Answer

v = 8.683 m/s
10.Work & energy

Answer: v = 7.345 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 19.62·(3.5 − 0.3·2.5) = 53.96 J

Speed at the spring

½mv² = mg(h − μL) → v = √(2g(h − μL)) = √(2·9.81·2.75) = 7.345 m/s

Answer

v = 7.345 m/s
11.Momentum & collisions

Answer: v′2 = 19.67 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum before

p = M·u = 17·28 = 476 kg·m/s

Momentum after

476 = 5·48 + 12·v′2
v′2 = (476 − 240)/12 = 19.67 m/s

Answer

v′2 = 19.67 m/s
12.Momentum & collisions

Answer: v = 133.8 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Rise of the block

h = L·(1 − cos θ) = 1.5·(1 − cos 40°) = 0.3509 m

Speed after impact

V = √(2·9.81·0.3509) = 2.624 m/s

Collision

v = (m + M)·V/m = 1.02·2.624/0.02 = 133.8 m/s

Answer

v = 133.8 m/s
13.Rigid-body rotation

Answer: N = 218.2 rev

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·3000/60 = 314.2 rad/s

Work of the brake equals the kinetic energy

½·I·ω² = ½·2.5·314.2² = 123370 J
θ = 123370/90 = 1371 rad

Revolutions

N = θ/2π = 218.2 rev

Answer

N = 218.2 rev
14.Rigid-body rotation

Answer: v = 6.711 m/s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Height dropped

h = s·sin θ = 5·sin 40° = 3.214 m

Energy balance with rolling

Rolling without slipping: ω = v/r, and friction does no work at the contact point.

m·g·h = ½·m·v²·(1 + 0.4)
v = √(2·9.81·3.214/1.4) = 6.711 m/s

Answer

v = 6.711 m/s
15.Gears & gear trains

Answer: T1 = 7.244 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·1450/60 = 151.8 rad/s
T1 = P/ω₁ = 1100/151.8 = 7.244 N·m

Answer

T1 = 7.244 N·m
16.Gears & gear trains

Answer: ND = 50

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Intermediate shaft speed

nB = nC = 1440·24/72 = 480 rpm

Teeth on gear D

ND = C·nC/nout = 18·480/172.8 = 50

Answer

ND = 50
17.Springs & pendulums

Answer: v = 0.7427 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(350/3.6) = 9.86 rad/s
ω·t = 9.86·1.15 = 11.34 rad

Velocity

v = −A·ω·sin(ω·t) = −0.08·9.86·sin(11.34) = 0.7427 m/s

Answer

v = 0.7427 m/s
18.Springs & pendulums

Answer: E = 1.352 J

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(160/0.9) = 13.33 rad/s

Energy

E = ½·k·A² = ½·160·0.13² = 1.352 J

Answer

E = 1.352 J
19.Mechanical vibrations

Answer: ζ = 0.1019

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/5)·ln(15/0.6) = 0.6438

Damping ratio

ζ = δ/√(4π² + δ²) = 0.6438/√(39.48 + 0.4144) = 0.1019

Answer

ζ = 0.1019
20.Mechanical vibrations

Answer: keq = 115 kN/m

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 100 + 15 = 115 kN/m

Answer

keq = 115 kN/m

ExamProblems · examproblems.com/courses/dynamics