Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)t = ?27.78

A car driving at 100 km/h brakes with a constant deceleration of 3.5 m/s² until it stops. How long does braking take? Find t.

v₀ = 100 km/ha = −3.5 m/s²v = 0
t = s
2.KinematicsHard
v₀ = 17 m/s5 m

A ball is thrown straight up at 17 m/s from the edge of a roof 5 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 17 m/sh₀ = 5 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
θ = 30°a = ?m = 11 kg

An 11 kg block slides down a frictionless slope at 30° to the horizontal. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 11 kgθ = 30°μ = 0g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
11 kg4 kgTF = 90 Nμ = 0.1

Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 90 N pulls the front 4 kg block; the 11 kg block is towed behind. The coefficient of kinetic friction is 0.1 for both blocks. Use g = 9.81 m/s². Find the tension T in the connecting string.

m1 = 11 kgm2 = 4 kgF = 90 Nμ = 0.1g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = 16 m/s45°rangeH = ?

A ball is launched at 45° above horizontal from level ground. Ignore air resistance. Find the maximum height H the ball reaches.

v0 = 16 m/sθ = 45°g = 9.81 m/s²
H = m
6.Projectile motionHard
h = 30 mv0​ = 22 m/s30°H = ?

A ball is launched at 22 m/s and 30° above the horizontal from the top of a 30 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the greatest height H above the ground at the foot of the cliff.

v₀ = 22 m/sθ = 30°h = 30 mg = 9.81 m/s²
H = m
7.Circular motionMedium
r = 110 mvmax​ = ?

A car drives over the top of a hump in the road, which is a circular arc of radius 110 m. Use g = 9.81 m/s². Above what speed vmax do the wheels leave the road at the top?

r = 110 mg = 9.81 m/s²
vmax = m/s
8.Circular motionHard
r = 0.5 m5.5 m/svtop​ = ?

A 1.6 kg ball on a light string 0.5 m long is swung in a vertical circle. At the lowest point its speed is 5.5 m/s. Ignore air resistance and use g = 9.81 m/s². Find the tension Ttop in the string at the highest point.

m = 1.6 kgr = 0.5 mvbottom = 5.5 m/sg = 9.81 m/s²
Ttop = N
9.Work & energyMedium
72 km/h5°800 kg

An 800 kg car drives up a 5° slope at a constant 72 km/h. Air resistance and rolling resistance together amount to 550 N. Find the power P the wheels must deliver, in kW.

m = 800 kgθ = 5°Fr = 550 Nv = 72 km/hg = 9.81 m/s²
P = kW
10.Work & energyHard
h = 13 mR = 5 mN = ?

A 5 kg cart is released from rest at a height of 13 m on a smooth track that leads into a vertical circular loop of radius 5 m. Find the normal force N the track exerts on the cart at the top of the loop.

m = 5 kgh = 13 mR = 5 mg = 9.81 m/s²
N = N
11.Momentum & collisionsMedium
2.5 kg10 m/s0.5 kg

A 2.5 kg glider moving at 10 m/s makes a perfectly elastic head-on collision with a 0.5 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).

m1 = 2.5 kgm2 = 0.5 kgv1 = 10 m/sv2 = 0
v′1 = m/s
12.Momentum & collisionsHard
1400 kgv1​ = ?1000 kg

A 1400 kg car runs into a parked 1000 kg car. The wrecks lock together and skid 13 m before stopping. The coefficient of kinetic friction between tyres and road is 0.7. Use g = 9.81 m/s². Find the speed v1 of the first car just before the collision.

m1 = 1400 kgm2 = 1000 kgd = 13 mμ = 0.7g = 9.81 m/s²
v1 = m/s
13.Rigid-body rotationMedium
4.5 kgaαM = 15 kgR = 0.3 m

A 4.5 kg block hangs from a light cord wrapped around a pulley, a uniform solid disc of mass 15 kg and radius 0.3 m that turns on a frictionless horizontal axle. The block is released from rest. Use g = 9.81 m/s². Find the tension T in the cord.

m = 4.5 kgM = 15 kgR = 0.3 mg = 9.81 m/s²
T = N
14.Rigid-body rotationHard
θ = 15°a

A solid cylinder rolls without slipping down a slope inclined at 15° to the horizontal. Use g = 9.81 m/s². Find the acceleration a of its centre.

θ = 15°I = ½·m·r²g = 9.81 m/s²
a = m/s²
15.Gears & gear trainsMedium
d1​ = 125 mmd2​ = 400 mm960 rpmT1​ = 1200 NT2​ = 480 NP = ?

A belt runs on a 125 mm driving pulley at 960 rpm. The tension is 1200 N on the tight side and 480 N on the slack side. Find the power P transmitted, in kW.

d1 = 125 mmn1 = 960 rpmT1 = 1200 NT2 = 480 N
P = kW
16.Gears & gear trainsHard
A = 36B = 50C = 24D = 60

A 15 kW motor at 2900 rpm drives gear A (36 teeth), which meshes with gear B (50 teeth). Gear C (24 teeth) on the same shaft as B drives gear D (60 teeth) on the output shaft. Each gear mesh has an efficiency of 95%. Find the output torque Tout.

P = 15 kWnin = 2900 rpmA = 36B = 50C = 24D = 60ηmesh = 95%
Tout = N·m
17.Springs & pendulumsMedium
L = 0.9 m

A simple pendulum has a length of 0.9 m. Use g = 9.81 m/s². Find its period T for small swings.

L = 0.9 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
0.9 kgk = 380 N/mA = 7 cm

A 0.9 kg mass on a spring with k = 380 N/m is pulled 7 cm from equilibrium and released. Find its maximum speed vmax.

m = 0.9 kgk = 380 N/mA = 7 cm
vmax = m/s
19.Mechanical vibrationsMedium
tx30 mm3 cycles1.7 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 30 mm is followed 3 cycles later by a peak of 1.7 mm. Find the damping ratio ζ.

x0 = 30 mmx3 = 1.7 mmn = 3
ζ =
20.Mechanical vibrationsHard
k1​ = 60k2​ = 80m = 40 kg

A 40 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 60 kN/m and k₂ = 80 kN/m. The mass stays level. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 40 kgk1 = 60 kN/mk2 = 80 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: t = 7.937 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 100/3.6 = 27.78 m/s

Braking time

0 = v₀ − a·t → t = v₀/a = 27.78/3.5 = 7.937 s

Answer

t = 7.937 s
2.Kinematics

Answer: t = 3.739 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−5 = 17·t − ½·9.81·t²
4.905·t² − 17·t − 5 = 0

Solve the quadratic

Only the positive root is physical.

t = (17 + √(17² + 2·9.81·5))/9.81 = 3.739 s

Answer

t = 3.739 s
3.Newton’s laws

Answer: a = 4.905 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 30° − 0·cos 30°) = 9.81·(0.5 − 0) = 4.905 m/s²

Answer

a = 4.905 m/s²
4.Newton’s laws

Answer: T = 66 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Whole system

a = (F − μ·(m1 + m2)·g)/(m1 + m2) = (90 − 14.71)/15 = 5.019 m/s²

Rear block alone

T = m1·(a + μ·g) = 11·(5.019 + 0.981) = 66 N

Answer

T = 66 N

With the same μ on both blocks, friction drops out: T = F·m₁/(m₁ + m₂).

5.Projectile motion

Answer: H = 6.524 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 16·cos 45° = 11.31 m/s
vy = v0·sin θ = 16·sin 45° = 11.31 m/s

Highest point

At the top the vertical velocity is zero: vy² = 2gH.

H = vy²/(2g) = 11.31²/(2·9.81) = 6.524 m

Answer

H = 6.524 m
6.Projectile motion

Answer: H = 36.17 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Vertical launch speed

vy = 22·sin 30° = 11 m/s

Rise above the cliff

Δh = vy²/(2g) = 11²/(2·9.81) = 6.167 m

Height above the ground

H = 30 + 6.167 = 36.17 m

Answer

H = 36.17 m
7.Circular motion

Answer: vmax = 32.85 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Normal force zero

m·g = m·v²/r → v = √(g·r) = √(9.81·110) = 32.85 m/s

Answer

vmax = 32.85 m/s
(118.3 km/h)
8.Circular motion

Answer: Ttop = 18.32 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Speed at the top

Kinetic energy is traded for potential energy over a height 2r.

vtop² = 5.5² − 4·9.81·0.5 = 10.63 m²/s²

Forces at the top

Tension and gravity both point down, towards the centre.

T + m·g = m·vtop²/r
T = 1.6·10.63/0.5 − 1.6·9.81 = 18.32 N

Answer

Ttop = 18.32 N
9.Work & energy

Answer: P = 24.68 kW

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). Power is force times speed: P = F·v.

Driving force

m·g = 800·9.81 = 7848 N
mg·sin θ = 7848·sin 5° = 684 N
F = 684 + 550 = 1234 N

Power

v = 72/3.6 = 20 m/s
P = F·v = 1234·20 = 24680 W = 24.68 kW

Answer

P = 24.68 kW
10.Work & energy

Answer: N = 9.81 N

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.

Speed at the top

v² = 2g(h − 2R) = 2·9.81·(13 − 10) = 58.86 m²/s²

Forces at the top

m·g = 5·9.81 = 49.05 N
N = mv²/R − mg = 5·58.86/5 − 49.05 = 9.81 N

Answer

N = 9.81 N

The cart just makes it round when h = 2.5R; then N = 0 at the top.

11.Momentum & collisions

Answer: v′1 = 6.667 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (2.5 − 0.5)/(2.5 + 0.5)·10 = 6.667 m/s
v′2 = 2·2.5/(2.5 + 0.5)·10 = 16.67 m/s

Answer

v′1 = 6.667 m/s
12.Momentum & collisions

Answer: v1 = 22.91 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Speed after the collision

V = √(2·μ·g·d) = √(2·0.7·9.81·13) = 13.36 m/s

Momentum in the collision

m1·v1 = (m1 + m2)·V → v1 = 2400·13.36/1400 = 22.91 m/s

Answer

v1 = 22.91 m/s
(82.46 km/h)
13.Rigid-body rotation

Answer: T = 27.59 N

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Block and pulley

block: m·g − T = m·a
pulley: T·R = I·α = ½·M·R²·(a/R) → T = ½·M·a

Acceleration

a = m·g/(m + M/2) = 4.5·9.81/(4.5 + 7.5) = 3.679 m/s²

Tension

T = m·(g − a) = 4.5·(9.81 − 3.679) = 27.59 N

Answer

T = 27.59 N
14.Rigid-body rotation

Answer: a = 1.693 m/s²

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Equations of motion

m·g·sin θ − f = m·a
f·r = I·α = 0.5·m·r²·(a/r) → f = 0.5·m·a

Acceleration

a = g·sin θ/(1 + c) = 9.81·sin 15°/1.5 = 1.693 m/s²

Answer

a = 1.693 m/s²
15.Gears & gear trains

Answer: P = 4.524 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Belt speed

v = 6.283 m/s

Power

P = (1200 − 480)·6.283 = 4524 W = 4.524 kW

Answer

P = 4.524 kW
16.Gears & gear trains

Answer: Tout = 154.8 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Output speed

nout = 2900·(36/50)·(24/60) = 835.2 rpm
ωout = 2π·835.2/60 = 87.46 rad/s

Output power and torque

Pout = 15000·0.95² = 13538 W
Tout = Pout/ωout = 13538/87.46 = 154.8 N·m

Answer

Tout = 154.8 N·m
17.Springs & pendulums

Answer: T = 1.903 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Pendulum period

T = 2π·√(0.9/9.81) = 1.903 s

Answer

T = 1.903 s
18.Springs & pendulums

Answer: vmax = 1.438 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(380/0.9) = 20.55 rad/s

Maximum speed

vmax = A·ω = 0.07·20.55 = 1.438 m/s

Answer

vmax = 1.438 m/s
19.Mechanical vibrations

Answer: ζ = 0.1506

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/3)·ln(30/1.7) = 0.9569

Damping ratio

ζ = δ/√(4π² + δ²) = 0.9569/√(39.48 + 0.9156) = 0.1506

Answer

ζ = 0.1506
20.Mechanical vibrations

Answer: fn = 9.416 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 60 + 80 = 140 kN/m

Natural frequency

ωn = √(140000/40) = 59.16 rad/s
fn = 59.16/(2π) = 9.416 Hz

Answer

fn = 9.416 Hz

ExamProblems · examproblems.com/courses/dynamics