Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
policea = 2.5 m/s²car23 m/s

A car speeding at a constant 23 m/s passes a police car standing still. At that moment the police car starts and accelerates uniformly at 2.5 m/s². How long does it take the police car to catch up? Find t.

vcar = 23 m/sapolice = 2.5 m/s²v0,police = 0
t = s
2.KinematicsHard
a = 30 m/s²

A model rocket is launched straight up from rest. Its engine gives it a constant upward acceleration of 30 m/s² for 1 s, after which the engine stops and the rocket moves freely. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax the rocket reaches.

a = 30 m/s²t1 = 1 sg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
θ = 40°a = ?m = 17 kg

A 17 kg block slides down a slope at 40° to the horizontal. The coefficient of kinetic friction is 0.25. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 17 kgθ = 40°μ = 0.25g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
θ = 20°blockv₀ = 9.5 m/s

A block is given a push so that it starts sliding up a ramp at 20° with a speed of 9.5 m/s. The coefficient of kinetic friction is 0.2. Use g = 9.81 m/s². How far d along the ramp does it slide before it stops?

v₀ = 9.5 m/sθ = 20°μ = 0.2g = 9.81 m/s²
d = m
5.Projectile motionMedium
v0​ = 38 m/s35°x = ?

A ball is launched at 35° above horizontal from level ground. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 38 m/sθ = 35°g = 9.81 m/s²
x = m
6.Projectile motionHard
h = 15 mv0​ = 18 m/s40°range

A ball is launched at 40° above horizontal from the top of a 15 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 18 m/sθ = 40°h = 15 mg = 9.81 m/s²
t = s
7.Circular motionMedium
r = 70 m12 m/s

An 800 kg car drives over the top of a hump in the road at 12 m/s. The top of the hump is a circular arc of radius 70 m. Use g = 9.81 m/s². Find the normal force N of the road on the car at the top.

m = 800 kgv = 12 m/sr = 70 mg = 9.81 m/s²
N = N
8.Circular motionHard
r = 0.8 m8.5 m/svtop​ = ?

A 0.8 kg ball on a light string 0.8 m long is swung in a vertical circle. At the lowest point its speed is 8.5 m/s. Ignore air resistance and use g = 9.81 m/s². Find the tension Ttop in the string at the highest point.

m = 0.8 kgr = 0.8 mvbottom = 8.5 m/sg = 9.81 m/s²
Ttop = N
9.Work & energyMedium
40 km/h

A car travelling at 40 km/h on a level road brakes hard and skids to a stop with its wheels locked. The coefficient of kinetic friction between the tyres and the road is 0.4. Find the stopping distance d.

v = 40 km/hμ = 0.4g = 9.81 m/s²
d = m
10.Work & energyHard
h = 13.5 mR = 3 mv = ?

A 5 kg cart is released from rest at a height of 13.5 m on a smooth track that leads into a vertical circular loop of radius 3 m. Find the speed v of the cart at the top of the loop.

m = 5 kgh = 13.5 mR = 3 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
0.5 kg6 m/s2 kg

A 0.5 kg glider moving at 6 m/s makes a perfectly elastic head-on collision with a 2 kg glider at rest on a frictionless track. Find the velocity v′2 of the second glider after the collision.

m1 = 0.5 kgm2 = 2 kgv1 = 6 m/sv2 = 0
v′2 = m/s
12.Momentum & collisionsHard
27 m/s15 m/s

A 0.45 kg ball hits a wall at 27 m/s and bounces straight back at 15 m/s. The contact lasts 25 ms. Find the magnitude of the impulse J the wall gives the ball.

m = 0.45 kgvin = 27 m/svout = 15 m/sΔt = 25 ms
J = N·s
13.Rigid-body rotationMedium
n = 1600 rpmTb​ = 115 N·mI = 27.5 kg·m²

A flywheel with a moment of inertia of 27.5 kg·m² spins at 1600 rpm. A brake applies a constant friction torque of 115 N·m. How long t does it take to stop?

I = 27.5 kg·m²n = 1600 rpmTb = 115 N·m
t = s
14.Rigid-body rotationHard
160 m/s40 g1.02 mL = 1.8 m10 kgφ

A uniform slender rod of mass 10 kg and length 1.8 m hangs at rest from a frictionless pivot at its top end. A 40 g bullet moving horizontally at 160 m/s hits the rod 1.02 m below the pivot and stays embedded. Use g = 9.81 m/s². Find the largest angle φ from the vertical through which the rod swings.

M = 10 kgL = 1.8 mm = 40 gv = 160 m/sd = 1.02 mg = 9.81 m/s²
φ = °
15.Gears & gear trainsMedium
N1​ = 24N2​ = 60

A 3 kW motor running at 1500 rpm drives a pinion with 24 teeth, which meshes with a gear with 60 teeth. Ignore losses. Find the output torque T2 on the gear shaft.

P = 3 kWn1 = 1500 rpmN1 = 24N2 = 60η = 100%
T2 = N·m
16.Gears & gear trainsHard
A = 12B = 32C = 18D = 50

A 7.5 kW motor at 1450 rpm drives gear A (12 teeth), which meshes with gear B (32 teeth). Gear C (18 teeth) on the same shaft as B drives gear D (50 teeth) on the output shaft. Each gear mesh has an efficiency of 97%. Find the output torque Tout.

P = 7.5 kWnin = 1450 rpmA = 12B = 32C = 18D = 50ηmesh = 97%
Tout = N·m
17.Springs & pendulumsMedium
L = 3 m

A simple pendulum has a length of 3 m. Use g = 9.81 m/s². Find its period T for small swings.

L = 3 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
1 kgk = 30 N/mA = 19 cm

A 1 kg mass on a spring with k = 30 N/m is pulled 19 cm from equilibrium and released. Find its maximum speed vmax.

m = 1 kgk = 30 N/mA = 19 cm
vmax = m/s
19.Mechanical vibrationsMedium
k = 25 kN/mζ = 0.35m = 50 kg

A 50 kg mass on a spring with a stiffness of 25 kN/m has a viscous damper giving a damping ratio of 0.35. Find the damped natural frequency fd of its free vibration in Hz.

m = 50 kgk = 25 kN/mζ = 0.35
fd = Hz
20.Mechanical vibrationsHard
k1​ = 60k2​ = 50k3​ = 15m = 10 kg

A 10 kg mass hangs from spring k₃ = 15 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 60 kN/m and k₂ = 50 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 10 kgk1 = 60 kN/mk2 = 50 kN/mk3 = 15 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: t = 18.4 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equal distances

v·t = ½·a·t² → t = 2v/a = 2·23/2.5 = 18.4 s

Answer

t = 18.4 s

At that moment the police car moves at 2v = 46 m/s.

2.Kinematics

Answer: hmax = 60.87 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Powered phase

v₁ = 30·1 = 30 m/s
h₁ = ½·30·1² = 15 m

Free flight up

At the top the velocity is zero.

Δh = v₁²/(2g) = 30²/(2·9.81) = 45.87 m
hmax = 15 + 45.87 = 60.87 m

Answer

hmax = 60.87 m
3.Newton’s laws

Answer: a = 4.427 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 40° − 0.25·cos 40°) = 9.81·(0.6428 − 0.1915) = 4.427 m/s²

Answer

a = 4.427 m/s²
4.Newton’s laws

Answer: d = 8.68 m

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Deceleration

Both forces point down the slope; the mass cancels.

a = 9.81·(sin 20° + 0.2·cos 20°) = 5.199 m/s²

Distance

d = v₀²/(2a) = 9.5²/(2·5.199) = 8.68 m

Answer

d = 8.68 m
5.Projectile motion

Answer: x = 138.3 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 38·cos 35° = 31.13 m/s
vy = v0·sin θ = 38·sin 35° = 21.8 m/s

Time in the air

Starting and landing at the same height: t = 2vy/g.

t = 2·21.8/9.81 = 4.444 s

Horizontal distance

x = vx·t = 31.13·4.444 = 138.3 m

Answer

x = 138.3 m
6.Projectile motion

Answer: t = 3.289 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 18·cos 40° = 13.79 m/s
vy = v0·sin θ = 18·sin 40° = 11.57 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 15 + 11.57·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (11.57 + √(133.9 + 294.3))/9.81 = 3.289 s

Answer

t = 3.289 s
7.Circular motion

Answer: N = 6202 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the top

Towards the centre (down) is positive.

m·g − N = m·v²/r
N = 800·9.81 − 800·12²/70 = 7848 − 1646 = 6202 N

Answer

N = 6202 N

The car feels lighter: the road pushes up less than its weight.

8.Circular motion

Answer: Ttop = 33.01 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Speed at the top

Kinetic energy is traded for potential energy over a height 2r.

vtop² = 8.5² − 4·9.81·0.8 = 40.86 m²/s²

Forces at the top

Tension and gravity both point down, towards the centre.

T + m·g = m·vtop²/r
T = 0.8·40.86/0.8 − 0.8·9.81 = 33.01 N

Answer

Ttop = 33.01 N
9.Work & energy

Answer: d = 15.73 m

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Speed in base units

v = 40/3.6 = 11.11 m/s

Energy balance

½mv² = μmg·d → d = v²/(2μg) = 11.11²/(2·0.4·9.81) = 15.73 m

Answer

d = 15.73 m

Doubling the speed makes the stopping distance four times longer.

10.Work & energy

Answer: v = 12.13 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.

Speed at the top

v² = 2g(h − 2R) = 2·9.81·(13.5 − 6) = 147.2 m²/s²
v = 12.13 m/s

Answer

v = 12.13 m/s

The cart just makes it round when h = 2.5R; then N = 0 at the top.

11.Momentum & collisions

Answer: v′2 = 2.4 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (0.5 − 2)/(0.5 + 2)·6 = −3.6 m/s
v′2 = 2·0.5/(0.5 + 2)·6 = 2.4 m/s

Answer

v′2 = 2.4 m/s
12.Momentum & collisions

Answer: J = 18.9 N·s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.45·(15 + 27) = 18.9 N·s

Answer

J = 18.9 N·s
13.Rigid-body rotation

Answer: t = 40.07 s

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·1600/60 = 167.6 rad/s

Deceleration and time

α = Tb/I = 115/27.5 = 4.182 rad/s²
t = ω/α = 167.6/4.182 = 40.07 s

Answer

t = 40.07 s
14.Rigid-body rotation

Answer: φ = 12.08 °

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Moment of inertia after the impact

I = M·L²/3 + m·d² = 10·1.8²/3 + 0.04·1.02² = 10.84 kg·m²

Angular momentum about the pivot

The pivot force passes through the pivot, so it has no moment there during the impact.

m·v·d = I·ω → ω = 0.04·160·1.02/10.84 = 0.6021 rad/s

Energy during the swing

½·I·ω² = ½·10.84·0.6021² = 1.965 J
(M·g·L/2 + m·g·d)·(1 − cos φ) = 88.69·(1 − cos φ)
cos φ = 1 − 1.965/88.69 = 0.9778 → φ = 12.08°

Answer

φ = 12.08°
15.Gears & gear trains

Answer: T2 = 47.75 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·1500/60 = 157.1 rad/s
T1 = P/ω₁ = 3000/157.1 = 19.1 N·m

Output torque

T2 = 19.1·60/24·1 = 47.75 N·m

Answer

T2 = 47.75 N·m
16.Gears & gear trains

Answer: Tout = 344.3 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Output speed

nout = 1450·(12/32)·(18/50) = 195.8 rpm
ωout = 2π·195.8/60 = 20.5 rad/s

Output power and torque

Pout = 7500·0.97² = 7057 W
Tout = Pout/ωout = 7057/20.5 = 344.3 N·m

Answer

Tout = 344.3 N·m
17.Springs & pendulums

Answer: T = 3.475 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Pendulum period

T = 2π·√(3/9.81) = 3.475 s

Answer

T = 3.475 s
18.Springs & pendulums

Answer: vmax = 1.041 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(30/1) = 5.477 rad/s

Maximum speed

vmax = A·ω = 0.19·5.477 = 1.041 m/s

Answer

vmax = 1.041 m/s
19.Mechanical vibrations

Answer: fd = 3.334 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(25000/50) = 22.36 rad/s
fn = 22.36/(2π) = 3.559 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 3.559·√(1 − 0.35²) = 3.334 Hz

Answer

fd = 3.334 Hz
20.Mechanical vibrations

Answer: fn = 5.782 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 60 + 50 = 110 kN/m
keq = 110·15/(110 + 15) = 13.2 kN/m

Natural frequency

ωn = √(13200/10) = 36.33 rad/s
fn = 36.33/(2π) = 5.782 Hz

Answer

fn = 5.782 Hz

ExamProblems · examproblems.com/courses/dynamics