Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
a = 3.75 m/s²s = 1500 m

A plane starts from rest and accelerates uniformly at 3.75 m/s² along a runway. Find its speed v after 1500 m.

v₀ = 0a = 3.75 m/s²s = 1500 m
v = m/s
2.KinematicsHard
v₀ = 13 m/s20 m

A ball is thrown straight up at 13 m/s from the edge of a roof 20 m above the ground. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax above the ground.

v₀ = 13 m/sh₀ = 20 mg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
20 kg25°F = 160 Nμ = 0.25

A 20 kg sled is pulled across level snow by a rope at 25° above the horizontal with a force of 160 N. The coefficient of kinetic friction is 0.25. Use g = 9.81 m/s². Find the acceleration a of the sled.

m = 20 kgF = 160 Nθ = 25°μ = 0.25g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
θ = 15°blockv₀ = 10 m/s

A block is given a push so that it starts sliding up a ramp at 15° with a speed of 10 m/s. The coefficient of kinetic friction is 0.25. Use g = 9.81 m/s². How far d along the ramp does it slide before it stops?

v₀ = 10 m/sθ = 15°μ = 0.25g = 9.81 m/s²
d = m
5.Projectile motionMedium
v0​ = 36 m/s55°x = ?

A ball is launched at 55° above horizontal from level ground. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 36 m/sθ = 55°g = 9.81 m/s²
x = m
6.Projectile motionHard
h = 45 mv0​ = 31 m/s45°v = ?

A ball is launched at 31 m/s and 45° above the horizontal from the top of a 45 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the speed v with which it hits the ground.

v₀ = 31 m/sθ = 45°h = 45 mg = 9.81 m/s²
v = m/s
7.Circular motionMedium
r = 110 m29 m/s

A 900 kg car drives over the top of a hump in the road at 29 m/s. The top of the hump is a circular arc of radius 110 m. Use g = 9.81 m/s². Find the normal force N of the road on the car at the top.

m = 900 kgv = 29 m/sr = 110 mg = 9.81 m/s²
N = N
8.Circular motionHard
r = 1.1 mv = 3.5 m/s

A 1.6 kg ball on a string 1.1 m long is swung in a vertical circle. At the lowest point it moves at 3.5 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.

m = 1.6 kgr = 1.1 mv = 3.5 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
15°d = 2 mμ = 0.1

A block slides from rest down a slope at 15° to the horizontal. The coefficient of kinetic friction is 0.1. Find its speed v after it has slid 2 m along the slope.

θ = 15°μ = 0.1d = 2 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
F = 25 N25°μ = 0.252 kg

A 2 kg block starts from rest at the bottom of a 25° slope and is pulled up the slope by a constant force of 25 N parallel to the slope. The coefficient of kinetic friction is 0.25. Find the speed v of the block after it has moved 5 m up the slope.

m = 2 kgF = 25 Nθ = 25°μ = 0.25d = 5 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
1.5 kg4 m/s5 kg

A 1.5 kg glider moving at 4 m/s makes a perfectly elastic head-on collision with a 5 kg glider at rest on a frictionless track. Find the velocity v′2 of the second glider after the collision.

m1 = 1.5 kgm2 = 5 kgv1 = 4 m/sv2 = 0
v′2 = m/s
12.Momentum & collisionsHard
1800 kg16 m/s1100 kg17 m/sθ = ?

At a crossing a 1800 kg car travelling east at 16 m/s collides with a 1100 kg car travelling north at 17 m/s. The cars lock together. Find the direction θ of the wreck just after the collision, measured north of east.

m1 = 1800 kgv1 = 16 m/s (E)m2 = 1100 kgv2 = 17 m/s (N)
θ = °
13.Rigid-body rotationMedium
L = 1.6 mm = 1 kgα

A uniform slender rod of mass 1 kg and length 1.6 m is pinned at one end and held horizontal. It is released from rest. Use g = 9.81 m/s². Find the acceleration atip of the free end just after release.

m = 1 kgL = 1.6 mg = 9.81 m/s²
atip = m/s²
14.Rigid-body rotationHard
θ = 20°vs = 3 m

A thin hoop starts from rest and rolls without slipping down a slope inclined at 20° to the horizontal. Use g = 9.81 m/s². Its radius is 0.3 m. Find its angular velocity ω after it has rolled 3 m along the slope.

θ = 20°s = 3 mI = m·r²g = 9.81 m/s²r = 0.3 m
ω = rad/s
15.Gears & gear trainsMedium
N1​ = 16, m = 3 mm

An 11 kW motor running at 1440 rpm drives a pinion with 16 teeth and a module of 3 mm. Find the tangential force Ft on the pinion teeth.

P = 11 kWn = 1440 rpmN1 = 16m = 3 mm
Ft = N
16.Gears & gear trainsHard
Ns​ = 24nr​ = ?Np​ = 30carrier fixed

In a planetary gear set the sun gear has 24 teeth and each planet gear has 30 teeth. The planet carrier is held fixed and the sun is driven at 1800 rpm. Find the speed nr of the ring gear (magnitude).

Ns = 24Np = 30ns = 1800 rpm
nr = rpm
17.Springs & pendulumsMedium
t (s)x (cm)1 s

A 2.9 kg mass on a spring with k = 70 N/m is pulled 7 cm in the positive direction and released from rest at t = 0. Find its displacement x from equilibrium at t = 1 s (with sign).

m = 2.9 kgk = 70 N/mA = 7 cmt = 1 s
x = cm
18.Springs & pendulumsHard
4 kgk = 500 N/m200 m/s

A 15 g bullet moving at 200 m/s hits and stays in a 4 kg block resting on a frictionless surface. The block is attached to a horizontal spring with k = 500 N/m. Find the amplitude A of the resulting oscillation in cm.

m = 15 gv = 200 m/sM = 4 kgk = 500 N/m
A = cm
19.Mechanical vibrationsMedium
tx40 mm4 cycles3.2 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 40 mm is followed 4 cycles later by a peak of 3.2 mm. Find the damping ratio ζ.

x0 = 40 mmx4 = 3.2 mmn = 4
ζ =
20.Mechanical vibrationsHard
k1​ = 30k2​ = 12m = 5 kg

A 5 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 30 kN/m and the lower one k₂ = 12 kN/m. Find the equivalent stiffness keq of the spring system in kN/m.

m = 5 kgk1 = 30 kN/mk2 = 12 kN/m
keq = kN/m

3Solutions

1.Kinematics

Answer: v = 106.1 m/s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Speed after the distance

v = √(2·a·s) = √(2·3.75·1500) = 106.1 m/s

Answer

v = 106.1 m/s
(381.8 km/h)
2.Kinematics

Answer: hmax = 28.61 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Rise above the roof

0 = v₀² − 2·g·Δh → Δh = 13²/(2·9.81) = 8.614 m

Height above the ground

hmax = 20 + 8.614 = 28.61 m

Answer

hmax = 28.61 m
3.Newton’s laws

Answer: a = 5.643 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Normal force

N = m·g − F·sin θ = 196.2 − 160·sin 25° = 128.6 N

Horizontal forces

m·a = F·cos θ − μ·N = 145 − 32.15
a = 112.9/20 = 5.643 m/s²

Answer

a = 5.643 m/s²
4.Newton’s laws

Answer: d = 10.19 m

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Deceleration

Both forces point down the slope; the mass cancels.

a = 9.81·(sin 15° + 0.25·cos 15°) = 4.908 m/s²

Distance

d = v₀²/(2a) = 10²/(2·4.908) = 10.19 m

Answer

d = 10.19 m
5.Projectile motion

Answer: x = 124.1 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 36·cos 55° = 20.65 m/s
vy = v0·sin θ = 36·sin 55° = 29.49 m/s

Time in the air

Starting and landing at the same height: t = 2vy/g.

t = 2·29.49/9.81 = 6.012 s

Horizontal distance

x = vx·t = 20.65·6.012 = 124.1 m

Answer

x = 124.1 m
6.Projectile motion

Answer: v = 42.94 m/s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

vx = 31·cos 45° = 21.92 m/s
vy0 = 31·sin 45° = 21.92 m/s

Vertical speed at impact

Energy or v² = v₀² + 2as in the vertical direction.

vy = √(21.92² + 2·9.81·45) = 36.92 m/s

Impact speed

v = √(21.92² + 36.92²) = 42.94 m/s

Answer

v = 42.94 m/s

Check with energy: v² = v₀² + 2gh.

7.Circular motion

Answer: N = 1948 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the top

Towards the centre (down) is positive.

m·g − N = m·v²/r
N = 900·9.81 − 900·29²/110 = 8829 − 6881 = 1948 N

Answer

N = 1948 N

The car feels lighter: the road pushes up less than its weight.

8.Circular motion

Answer: T = 33.51 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the lowest point

Towards the centre (up) is positive.

T − m·g = m·v²/r
T = 1.6·9.81 + 1.6·3.5²/1.1 = 15.7 + 17.82 = 33.51 N

Answer

T = 33.51 N
9.Work & energy

Answer: v = 2.523 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy balance along the slope

The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.

½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·2·(0.2588 − 0.1·0.9659)) = 2.523 m/s

Answer

v = 2.523 m/s
10.Work & energy

Answer: v = 7.83 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Forces along the slope

m·g = 2·9.81 = 19.62 N
mg·sin θ = 8.292 N
μ·mg·cos θ = 4.445 N

Work–energy

½mv² = (25 − 12.74)·5 = 61.31 J
v = √(2·61.31/2) = 7.83 m/s

Answer

v = 7.83 m/s
11.Momentum & collisions

Answer: v′2 = 1.846 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (1.5 − 5)/(1.5 + 5)·4 = −2.154 m/s
v′2 = 2·1.5/(1.5 + 5)·4 = 1.846 m/s

Answer

v′2 = 1.846 m/s
12.Momentum & collisions

Answer: θ = 33 °

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum components

px = 1800·16 = 28800 kg·m/s
py = 1100·17 = 18700 kg·m/s

Direction

tan θ = py/px = 0.6493 → θ = 33°

Answer

θ = 33°
13.Rigid-body rotation

Answer: atip = 14.71 m/s²

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Moments about the pin

At the moment of release ω = 0, so there is no centripetal acceleration and the centre accelerates straight down.

m·g·L/2 = (m·L²/3)·α → α = 3g/(2L) = 3·9.81/(2·1.6) = 9.197 rad/s²

Acceleration of the free end

atip = α·L = 9.197·1.6 = 14.71 m/s²

Answer

atip = 14.71 m/s²

atip = 1.5·g for any length: the free end falls faster than a dropped stone.

14.Rigid-body rotation

Answer: ω = 10.58 rad/s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Height dropped

h = s·sin θ = 3·sin 20° = 1.026 m

Energy balance with rolling

Rolling without slipping: ω = v/r, and friction does no work at the contact point.

m·g·h = ½·m·v²·(1 + 1)
v = √(2·9.81·1.026/2) = 3.173 m/s
ω = v/r = 3.173/0.3 = 10.58 rad/s

Answer

ω = 10.58 rad/s
15.Gears & gear trains

Answer: Ft = 3039 N

Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.

Torque on the pinion

ω = 2π·1440/60 = 150.8 rad/s
T = P/ω = 11000/150.8 = 72.95 N·m

Pitch diameter

d = m·N = 3·16 = 48 mm

Tangential force

Ft = 2T/d = 2·72.95/0.048 = 3039 N

Answer

Ft = 3039 N
16.Gears & gear trains

Answer: nr = 514.3 rpm

Planetary gear sets: the speeds of sun, ring and carrier are linked by the Willis equation (ns − nc)/(nr − nc) = −Nr/Ns: seen from the carrier, the set is an ordinary train with the planets as idlers. Holding one member fixed turns the set into a single-ratio reducer.

Ring gear teeth

Nr = Ns + 2·Np = 24 + 2·30 = 84

Willis equation with the carrier fixed

With nc = 0 the sun drives the ring through the planets, which act as idlers.

nr = −ns·Ns/Nr = −1800·24/84 = −514.3 rpm
|nr| = 514.3 rpm

Answer

nr = 514.3 rpm

The ring turns opposite to the sun.

17.Springs & pendulums

Answer: x = 1.395 cm

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(70/2.9) = 4.913 rad/s
ω·t = 4.913·1 = 4.913 rad

Displacement

x = A·cos(ω·t) = 7·cos(4.913) = 1.395 cm

Answer

x = 1.395 cm
18.Springs & pendulums

Answer: A = 6.696 cm

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Speed after impact

V = m·v/(m + M) = 0.015·200/4.015 = 0.7472 m/s

Angular frequency

ω = √(k/(m + M)) = √(500/4.015) = 11.16 rad/s

Amplitude

A = V/ω = 0.7472/11.16 = 0.06696 m = 6.696 cm

Answer

A = 6.696 cm
19.Mechanical vibrations

Answer: ζ = 0.09999

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/4)·ln(40/3.2) = 0.6314

Damping ratio

ζ = δ/√(4π² + δ²) = 0.6314/√(39.48 + 0.3987) = 0.09999

Answer

ζ = 0.09999
20.Mechanical vibrations

Answer: keq = 8.571 kN/m

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.

1/keq = 1/30 + 1/12 → keq = 30·12/(30 + 12) = 8.571 kN/m

Answer

keq = 8.571 kN/m

ExamProblems · examproblems.com/courses/dynamics