Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
policea = 4 m/s²car15 m/s

A car speeding at a constant 15 m/s passes a police car standing still. At that moment the police car starts and accelerates uniformly at 4 m/s². How far from its starting point does the police car catch up? Find d.

vcar = 15 m/sapolice = 4 m/s²v0,police = 0
d = m
2.KinematicsHard
v₀ = 20 m/s40 m

A ball is thrown straight up at 20 m/s from the edge of a roof 40 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 20 m/sh₀ = 40 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
θ = 40°a = ?m = 14 kg

A 14 kg block slides down a slope at 40° to the horizontal. The coefficient of kinetic friction is 0.3. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 14 kgθ = 40°μ = 0.3g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 4 kg10 kgθ = 25°

A 4 kg block on a ramp at 25° is connected by a light string over a frictionless pulley at the top of the ramp to a hanging 10 kg mass. The hanging mass moves down. The coefficient of kinetic friction between block and ramp is 0.2. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 4 kgm2 = 10 kgθ = 25°μ = 0.2g = 9.81 m/s²
T = N
5.Projectile motionMedium
11 my = ?v0​ = 12 m/s35°

A ball is kicked from level ground at 12 m/s and 35° above the horizontal towards a wall 11 m away. Ignore air resistance and use g = 9.81 m/s². At what height y does the ball pass the wall?

v₀ = 12 m/sθ = 35°x = 11 mg = 9.81 m/s²
y = m
6.Projectile motionHard
h = 15 mv0​ = 20 m/s25°x = ?

A ball is launched at 25° above horizontal from the top of a 15 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 20 m/sθ = 25°h = 15 mg = 9.81 m/s²
x = m
7.Circular motionMedium
r = 130 mvmax​ = ?

A car takes a flat curve of radius 130 m. The coefficient of static friction between tyres and road is 0.7. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 130 mμs = 0.7g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
r = 1.5 mv = 4 m/s

A 1.1 kg ball on a string 1.5 m long is swung in a vertical circle. At the lowest point it moves at 4 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.

m = 1.1 kgr = 1.5 mv = 4 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
30°L = 2 m10 kg

A 10 kg ball hangs on a light string of length 2 m. It is pulled aside until the string makes 30° with the vertical and released from rest. Find the tension T in the string when the ball passes the lowest point.

m = 10 kgL = 2 mθ = 30°g = 9.81 m/s²
T = N
10.Work & energyHard
k = 500 N/m25°μ = 0.153 kg

A spring of stiffness 500 N/m at the bottom of a 25° slope is compressed by 15 cm against a 3 kg block and released. The coefficient of kinetic friction between block and slope is 0.15. How far d up the slope does the block travel from the release point before it stops? (Ignore the short distance over which the spring pushes, i.e. take friction and gravity over the whole distance d.)

m = 3 kgk = 500 N/mx = 15 cmθ = 25°μ = 0.15g = 9.81 m/s²
d = m
11.Momentum & collisionsMedium
2 kgv = ?20 gh = 19 cm

A 20 g bullet is fired horizontally into a 2 kg wooden block hanging on light strings, and stays inside it. The block swings up until it is 19 cm higher than at the start. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 20 gM = 2 kgh = 19 cmg = 9.81 m/s²
v = m/s
12.Momentum & collisionsHard
12 m/s5 m/s

A 0.55 kg ball hits a wall at 12 m/s and bounces straight back at 5 m/s. The contact lasts 40 ms. Find the average force Favg of the wall on the ball.

m = 0.55 kgvin = 12 m/svout = 5 m/sΔt = 40 ms
Favg = N
13.Rigid-body rotationMedium
v = ?L = 0.6 mm = 2.5 kg

A uniform slender rod of mass 2.5 kg and length 0.6 m is pinned at one end and released from rest in a horizontal position. Ignore friction and use g = 9.81 m/s². Find the speed v of the free end as the rod swings through the vertical position.

m = 2.5 kgL = 0.6 mg = 9.81 m/s²
v = m/s
14.Rigid-body rotationHard
540 m/s15 g1.21 mL = 1.9 m9.5 kgφ

A uniform slender rod of mass 9.5 kg and length 1.9 m hangs at rest from a frictionless pivot at its top end. A 15 g bullet moving horizontally at 540 m/s hits the rod 1.21 m below the pivot and stays embedded. Use g = 9.81 m/s². Find the largest angle φ from the vertical through which the rod swings.

M = 9.5 kgL = 1.9 mm = 15 gv = 540 m/sd = 1.21 mg = 9.81 m/s²
φ = °
15.Gears & gear trainsMedium
N1​ = 45N2​ = 50

A 7.5 kW motor running at 1450 rpm drives a pinion with 45 teeth, which meshes with a gear with 50 teeth. The gear pair has an efficiency of 98%. Find the torque T1 on the motor shaft.

P = 7.5 kWn1 = 1450 rpmN1 = 45N2 = 50η = 98%
T1 = N·m
16.Gears & gear trainsHard
A = 50B = 80C = 16D = 30

A 15 kW motor at 1450 rpm drives gear A (50 teeth), which meshes with gear B (80 teeth). Gear C (16 teeth) on the same shaft as B drives gear D (30 teeth) on the output shaft. Each gear mesh has an efficiency of 97%. Find the output torque Tout.

P = 15 kWnin = 1450 rpmA = 50B = 80C = 16D = 30ηmesh = 97%
Tout = N·m
17.Springs & pendulumsMedium
1.2 kgk = 460 N/mA = 5 cmx = 2 cm

A 1.2 kg mass on a spring with k = 460 N/m oscillates on a frictionless surface with an amplitude of 5 cm. Find its speed v when it is 2 cm from equilibrium.

m = 1.2 kgk = 460 N/mA = 5 cmx = 2 cm
v = m/s
18.Springs & pendulumsHard
2.6 kgk = 440 N/mA = 8 cm

A 2.6 kg mass on a spring with k = 440 N/m is pulled 8 cm from equilibrium and released. Find the total energy E of the oscillation.

m = 2.6 kgk = 440 N/mA = 8 cm
E = J
19.Mechanical vibrationsMedium
k = 20 kN/mζ = 0.3m = 8 kg

An 8 kg mass on a spring with a stiffness of 20 kN/m has a viscous damper giving a damping ratio of 0.3. Find the damped natural frequency fd of its free vibration in Hz.

m = 8 kgk = 20 kN/mζ = 0.3
fd = Hz
20.Mechanical vibrationsHard
k1​ = 15k2​ = 12m = 25 kg

A 25 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 15 kN/m and the lower one k₂ = 12 kN/m. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 25 kgk1 = 15 kN/mk2 = 12 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: d = 112.5 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equal distances

v·t = ½·a·t² → t = 2v/a = 2·15/4 = 7.5 s

Distance

d = v·t = 15·7.5 = 112.5 m

Answer

d = 112.5 m

At that moment the police car moves at 2v = 30 m/s.

2.Kinematics

Answer: t = 5.547 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−40 = 20·t − ½·9.81·t²
4.905·t² − 20·t − 40 = 0

Solve the quadratic

Only the positive root is physical.

t = (20 + √(20² + 2·9.81·40))/9.81 = 5.547 s

Answer

t = 5.547 s
3.Newton’s laws

Answer: a = 4.051 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 40° − 0.3·cos 40°) = 9.81·(0.6428 − 0.2298) = 4.051 m/s²

Answer

a = 4.051 m/s²
4.Newton’s laws

Answer: T = 44.95 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the string

m₂·g = 98.1 N
m₁·g·sin θ = 16.58 N
μ·m₁·g·cos θ = 7.113 N

Acceleration of the system

a = (98.1 − 16.58 − 7.113)/14 = 5.315 m/s²

Tension from the hanging mass

m2·g − T = m2·a → T = 10·(9.81 − 5.315) = 44.95 N

Answer

T = 44.95 N
5.Projectile motion

Answer: y = 1.56 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Time to the wall

vx = 12·cos 35° = 9.83 m/s
t = x/vx = 11/9.83 = 1.119 s

Height at that time

y = 6.883·1.119 − ½·9.81·1.119² = 1.56 m

Answer

y = 1.56 m

The ball is already on its way down at the wall.

6.Projectile motion

Answer: x = 50.95 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 20·cos 25° = 18.13 m/s
vy = v0·sin θ = 20·sin 25° = 8.452 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 15 + 8.452·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (8.452 + √(71.44 + 294.3))/9.81 = 2.811 s

Horizontal distance

x = vx·t = 18.13·2.811 = 50.95 m

Answer

x = 50.95 m
7.Circular motion

Answer: vmax = 29.88 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.7·9.81·130) = 29.88 m/s

Answer

vmax = 29.88 m/s (107.6 km/h)
8.Circular motion

Answer: T = 22.52 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the lowest point

Towards the centre (up) is positive.

T − m·g = m·v²/r
T = 1.1·9.81 + 1.1·4²/1.5 = 10.79 + 11.73 = 22.52 N

Answer

T = 22.52 N
9.Work & energy

Answer: T = 124.4 N

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.

Speed at the bottom

v² = 2gL(1 − cos θ) = 2·9.81·2·(1 − cos 30°) = 5.257 m²/s²

Forces at the bottom

m·g = 10·9.81 = 98.1 N
T = mg + mv²/L = 98.1 + 10·5.257/2 = 124.4 N

Answer

T = 124.4 N

Check: T = mg(3 − 2cos θ) = 124.4 N.

10.Work & energy

Answer: d = 0.3422 m

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Spring energy

x = 15 cm = 0.15 m
½kx² = ½·500·0.15² = 5.625 J

Energy balance along the slope

m·g = 3·9.81 = 29.43 N
½kx² = mg·d·(sin θ + μ·cos θ)
d = 5.625/(29.43·(0.4226 + 0.15·0.9063)) = 0.3422 m

Answer

d = 0.3422 m
11.Momentum & collisions

Answer: v = 195 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Swing after impact

V = √(2·g·h) = √(2·9.81·0.19) = 1.931 m/s

Collision

m·v = (m + M)·V → v = (0.02 + 2)·1.931/0.02 = 195 m/s

Answer

v = 195 m/s
12.Momentum & collisions

Answer: Favg = 233.8 N

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.55·(5 + 12) = 9.35 N·s

Average force

Favg = J/Δt = 9.35/0.04 = 233.8 N

Answer

Favg = 233.8 N
13.Rigid-body rotation

Answer: v = 4.202 m/s

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Loss of potential energy

m·g·L/2 = 2.5·9.81·0.3 = 7.357 J

Moment of inertia about the pin

IO = m·L²/3 = 2.5·0.6²/3 = 0.3 kg·m²

Energy balance

½·IO·ω² = 7.357 → ω = √(2·7.357/0.3) = 7.004 rad/s
v = ω·L = 7.004·0.6 = 4.202 m/s

Answer

v = 4.202 m/s
14.Rigid-body rotation

Answer: φ = 17.69 °

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Moment of inertia after the impact

I = M·L²/3 + m·d² = 9.5·1.9²/3 + 0.015·1.21² = 11.45 kg·m²

Angular momentum about the pivot

The pivot force passes through the pivot, so it has no moment there during the impact.

m·v·d = I·ω → ω = 0.015·540·1.21/11.45 = 0.8557 rad/s

Energy during the swing

½·I·ω² = ½·11.45·0.8557² = 4.193 J
(M·g·L/2 + m·g·d)·(1 − cos φ) = 88.71·(1 − cos φ)
cos φ = 1 − 4.193/88.71 = 0.9527 → φ = 17.69°

Answer

φ = 17.69°
15.Gears & gear trains

Answer: T1 = 49.39 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·1450/60 = 151.8 rad/s
T1 = P/ω₁ = 7500/151.8 = 49.39 N·m

Answer

T1 = 49.39 N·m
16.Gears & gear trains

Answer: Tout = 278.8 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Output speed

nout = 1450·(50/80)·(16/30) = 483.3 rpm
ωout = 2π·483.3/60 = 50.61 rad/s

Output power and torque

Pout = 15000·0.97² = 14114 W
Tout = Pout/ωout = 14114/50.61 = 278.8 N·m

Answer

Tout = 278.8 N·m
17.Springs & pendulums

Answer: v = 0.8972 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(460/1.2) = 19.58 rad/s

Speed at x

v = ω·√(A² − x²) = 19.58·√(0.05² − 0.02²) = 0.8972 m/s

Answer

v = 0.8972 m/s
18.Springs & pendulums

Answer: E = 1.408 J

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(440/2.6) = 13.01 rad/s

Energy

E = ½·k·A² = ½·440·0.08² = 1.408 J

Answer

E = 1.408 J
19.Mechanical vibrations

Answer: fd = 7.591 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(20000/8) = 50 rad/s
fn = 50/(2π) = 7.958 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 7.958·√(1 − 0.3²) = 7.591 Hz

Answer

fd = 7.591 Hz
20.Mechanical vibrations

Answer: fn = 2.599 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.

1/keq = 1/15 + 1/12 → keq = 15·12/(15 + 12) = 6.667 kN/m

Natural frequency

ωn = √(6667/25) = 16.33 rad/s
fn = 16.33/(2π) = 2.599 Hz

Answer

fn = 2.599 Hz

ExamProblems · examproblems.com/courses/dynamics