Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
a = ?s = 1300 m

A plane needs a speed of 240 km/h to take off and the usable runway is 1300 m long. Starting from rest, what constant acceleration a does it need?

v₀ = 0v = 240 km/hs = 1300 m
a = m/s²
2.KinematicsHard
a = 30 m/s²

A model rocket is launched straight up from rest. Its engine gives it a constant upward acceleration of 30 m/s² for 2 s, after which the engine stops and the rocket moves freely. Ignore air resistance and use g = 9.81 m/s². How long after launch does it hit the ground? Find t.

a = 30 m/s²t1 = 2 sg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
θ = 20°30 kgF = ?

A 30 kg box is pushed up a ramp at 20° to the horizontal at constant speed, by a force parallel to the ramp. The coefficient of kinetic friction is 0.2. Use g = 9.81 m/s². Find the pushing force F.

m = 30 kgθ = 20°μ = 0.2g = 9.81 m/s²
F = N
4.Newton’s lawsHard
m1​ = 9.5 kg4 kgno friction

A 9.5 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 4 kg mass. The table is frictionless. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 9.5 kgm2 = 4 kgμ = 0g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = 18 m/s45°range

A ball is launched at 45° above horizontal from level ground. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 18 m/sθ = 45°g = 9.81 m/s²
t = s
6.Projectile motionHard
h = 50 mv0​ = 15 m/s60°α = ?

A ball is launched at 15 m/s and 60° above the horizontal from the top of a 50 m cliff. Ignore air resistance and use g = 9.81 m/s². At what angle α below the horizontal does it hit the ground?

v₀ = 15 m/sθ = 60°h = 50 mg = 9.81 m/s²
α = °
7.Circular motionMedium
r = 20 mvmax​ = ?

A car takes a flat curve of radius 20 m. The coefficient of static friction between tyres and road is 0.6. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 20 mμs = 0.6g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
R = 1.5 mh = 6.15 m

A 3 kg cart is released from rest at a height of 6.15 m on a frictionless track and runs through a vertical loop of radius 1.5 m. Use g = 9.81 m/s². Find the normal force Nbottom of the track on the cart at the bottom of the loop.

m = 3 kgh = 6.15 mR = 1.5 mg = 9.81 m/s²
Nbottom = N
9.Work & energyMedium
30°d = 8 mμ = 0.15

A block slides from rest down a slope at 30° to the horizontal. The coefficient of kinetic friction is 0.15. Find its speed v after it has slid 8 m along the slope.

θ = 30°μ = 0.15d = 8 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
k = 5000 N/m35°μ = 0.32 kg

A spring of stiffness 5000 N/m at the bottom of a 35° slope is compressed by 5 cm against a 2 kg block and released. The coefficient of kinetic friction between block and slope is 0.3. How far d up the slope does the block travel from the release point before it stops? (Ignore the short distance over which the spring pushes, i.e. take friction and gravity over the whole distance d.)

m = 2 kgk = 5000 N/mx = 5 cmθ = 35°μ = 0.3g = 9.81 m/s²
d = m
11.Momentum & collisionsMedium
1100 kg15 m/s800 kg

A 1100 kg car moving at 15 m/s runs into a stationary 800 kg car and the two lock together. How much kinetic energy ΔK is lost in the collision?

m1 = 1100 kgv1 = 15 m/sm2 = 800 kgv2 = 0
ΔK = J
12.Momentum & collisionsHard
5 kgv = ?20 g40°L = 1.8 m

A 20 g bullet is fired horizontally into a 5 kg block hanging from light strings 1.8 m long, and stays in it. The strings swing out to a largest angle of 40° from the vertical. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 20 gM = 5 kgL = 1.8 mθ = 40°g = 9.81 m/s²
v = m/s
13.Rigid-body rotationMedium
ω = ?L = 2.3 mm = 9.5 kg

A uniform slender rod of mass 9.5 kg and length 2.3 m is pinned at one end and released from rest in a horizontal position. Ignore friction and use g = 9.81 m/s². Find the angular velocity ω of the rod as it swings through the vertical position.

m = 9.5 kgL = 2.3 mg = 9.81 m/s²
ω = rad/s
14.Rigid-body rotationHard
θ = 15°a

A thin hoop rolls without slipping down a slope inclined at 15° to the horizontal. Use g = 9.81 m/s². Find the smallest coefficient of static friction μs that prevents it from slipping.

θ = 15°I = m·r²g = 9.81 m/s²
μs =
15.Gears & gear trainsMedium
N1​ = 25N2​ = 50

A 0.75 kW motor running at 1440 rpm drives a pinion with 25 teeth, which meshes with a gear with 50 teeth. The gear pair has an efficiency of 95%. Find the output torque T2 on the gear shaft.

P = 0.75 kWn1 = 1440 rpmN1 = 25N2 = 50η = 95%
T2 = N·m
16.Gears & gear trainsHard
Ns​ = 15ring fixedNp​ = 18nc​ = ?

In a planetary gear set the sun gear has 15 teeth and each planet gear has 18 teeth. The ring gear is held fixed and the sun is driven at 1500 rpm. Find the speed nc of the planet carrier.

Ns = 15Np = 18ns = 1500 rpm
nc = rpm
17.Springs & pendulumsMedium
L = 2.7 m

A simple pendulum has a length of 2.7 m. Use g = 9.81 m/s². Find its period T for small swings.

L = 2.7 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
2.7 kgk = 440 N/mA = 16 cm

A 2.7 kg mass on a spring with k = 440 N/m is pulled 16 cm from equilibrium and released. Find the total energy E of the oscillation.

m = 2.7 kgk = 440 N/mA = 16 cm
E = J
19.Mechanical vibrationsMedium
tx12 mm1 cycle9.9 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 12 mm is followed one cycle later by a peak of 9.9 mm. Find the damping ratio ζ.

x0 = 12 mmx1 = 9.9 mmn = 1
ζ =
20.Mechanical vibrationsHard
k1​ = 10k2​ = 80m = 25 kg

A 25 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 10 kN/m and the lower one k₂ = 80 kN/m. Find the equivalent stiffness keq of the spring system in kN/m.

m = 25 kgk1 = 10 kN/mk2 = 80 kN/m
keq = kN/m

3Solutions

1.Kinematics

Answer: a = 1.709 m/s²

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v = 240/3.6 = 66.67 m/s

Acceleration

a = v²/(2s) = 66.67²/(2·1300) = 1.709 m/s²

Answer

a = 1.709 m/s²
2.Kinematics

Answer: t = 15.16 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Powered phase

v₁ = 30·2 = 60 m/s
h₁ = ½·30·2² = 60 m

Free flight to the ground

Solve −h₁ = v₁·t₂ − ½·g·t₂² for the positive root.

t₂ = (60 + √(60² + 2·9.81·60))/9.81 = 13.16 s
t = 2 + 13.16 = 15.16 s

Answer

t = 15.16 s
3.Newton’s laws

Answer: F = 156 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Constant speed: the forces balance.

F = m·g·sin θ + μ·m·g·cos θ

Pushing force

F = 100.7 + 55.31 = 156 N

Answer

F = 156 N
4.Newton’s laws

Answer: T = 27.61 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (39.24 − 0)/13.5 = 2.907 m/s²

Tension from the block on the table

T − μ·m1·g = m1·a
T = 9.5·2.907 + 0 = 27.61 N

Answer

T = 27.61 N
5.Projectile motion

Answer: t = 2.595 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 18·cos 45° = 12.73 m/s
vy = v0·sin θ = 18·sin 45° = 12.73 m/s

Time in the air

Starting and landing at the same height: t = 2vy/g.

t = 2·12.73/9.81 = 2.595 s

Answer

t = 2.595 s
6.Projectile motion

Answer: α = 77.53 °

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

vx = 15·cos 60° = 7.5 m/s
vy0 = 15·sin 60° = 12.99 m/s

Vertical speed at impact

Energy or v² = v₀² + 2as in the vertical direction.

vy = √(12.99² + 2·9.81·50) = 33.91 m/s

Impact angle

tan α = vy/vx = 33.91/7.5 → α = 77.53°

Answer

α = 77.53°
7.Circular motion

Answer: vmax = 10.85 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.6·9.81·20) = 10.85 m/s

Answer

vmax = 10.85 m/s (39.06 km/h)
8.Circular motion

Answer: Nbottom = 270.8 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Speed from energy conservation

v² = 2·9.81·6.15 = 120.7 m²/s²

Forces

Towards the centre is positive.

N = m·v²/R + m·g = 3·120.7/1.5 + 29.43 = 270.8 N

Answer

Nbottom = 270.8 N
9.Work & energy

Answer: v = 7.622 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy balance along the slope

The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.

½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·8·(0.5 − 0.15·0.866)) = 7.622 m/s

Answer

v = 7.622 m/s
10.Work & energy

Answer: d = 0.3888 m

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Spring energy

x = 5 cm = 0.05 m
½kx² = ½·5000·0.05² = 6.25 J

Energy balance along the slope

m·g = 2·9.81 = 19.62 N
½kx² = mg·d·(sin θ + μ·cos θ)
d = 6.25/(19.62·(0.5736 + 0.3·0.8192)) = 0.3888 m

Answer

d = 0.3888 m
11.Momentum & collisions

Answer: ΔK = 52105 J

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Common velocity

v′ = m1·v1/(m1 + m2) = 1100·15/1900 = 8.684 m/s

Kinetic energy before and after

Kbefore = ½·1100·15² = 123750 J
Kafter = ½·1900·8.684² = 71645 J

Energy lost

ΔK = 123750 − 71645 = 52105 J

Answer

ΔK = 52105 J

The lost energy goes into deformation, heat and sound.

12.Momentum & collisions

Answer: v = 721.5 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Rise of the block

h = L·(1 − cos θ) = 1.8·(1 − cos 40°) = 0.4211 m

Speed after impact

V = √(2·9.81·0.4211) = 2.874 m/s

Collision

v = (m + M)·V/m = 5.02·2.874/0.02 = 721.5 m/s

Answer

v = 721.5 m/s
13.Rigid-body rotation

Answer: ω = 3.577 rad/s

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Loss of potential energy

m·g·L/2 = 9.5·9.81·1.15 = 107.2 J

Moment of inertia about the pin

IO = m·L²/3 = 9.5·2.3²/3 = 16.75 kg·m²

Energy balance

½·IO·ω² = 107.2 → ω = √(2·107.2/16.75) = 3.577 rad/s

Answer

ω = 3.577 rad/s
14.Rigid-body rotation

Answer: μs = 0.134

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Equations of motion

m·g·sin θ − f = m·a
f·r = I·α = 1·m·r²·(a/r) → f = 1·m·a

Acceleration

a = g·sin θ/(1 + c) = 9.81·sin 15°/2 = 1.27 m/s²

Friction needed

f = c·m·a ≤ μ·m·g·cos θ → μ ≥ c·tan θ/(1 + c)
μs = 1·tan 15°/2 = 0.134

Answer

μs = 0.134
15.Gears & gear trains

Answer: T2 = 9.45 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·1440/60 = 150.8 rad/s
T1 = P/ω₁ = 750/150.8 = 4.974 N·m

Output torque

T2 = 4.974·50/25·0.95 = 9.45 N·m

Answer

T2 = 9.45 N·m
16.Gears & gear trains

Answer: nc = 340.9 rpm

Planetary gear sets: the speeds of sun, ring and carrier are linked by the Willis equation (ns − nc)/(nr − nc) = −Nr/Ns: seen from the carrier, the set is an ordinary train with the planets as idlers. Holding one member fixed turns the set into a single-ratio reducer.

Ring gear teeth

Nr = Ns + 2·Np = 15 + 2·18 = 51

Willis equation with the ring fixed

Set nr = 0 and solve for the carrier speed.

(1500 − nc)/(0 − nc) = −51/15
nc = ns·Ns/(Ns + Nr) = 1500·15/66 = 340.9 rpm

Answer

nc = 340.9 rpm

The carrier turns in the same direction as the sun.

17.Springs & pendulums

Answer: T = 3.296 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Pendulum period

T = 2π·√(2.7/9.81) = 3.296 s

Answer

T = 3.296 s
18.Springs & pendulums

Answer: E = 5.632 J

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(440/2.7) = 12.77 rad/s

Energy

E = ½·k·A² = ½·440·0.16² = 5.632 J

Answer

E = 5.632 J
19.Mechanical vibrations

Answer: ζ = 0.0306

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/1)·ln(12/9.9) = 0.1924

Damping ratio

ζ = δ/√(4π² + δ²) = 0.1924/√(39.48 + 0.03701) = 0.0306

Answer

ζ = 0.0306
20.Mechanical vibrations

Answer: keq = 8.889 kN/m

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.

1/keq = 1/10 + 1/80 → keq = 10·80/(10 + 80) = 8.889 kN/m

Answer

keq = 8.889 kN/m

ExamProblems · examproblems.com/courses/dynamics