In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Kinematics
Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h
Method
List what you know: v₀, v, a, t and s, with units.
Pick the equation that contains your three knowns and the unknown.
Choose one positive direction and give opposing quantities a minus sign.
Solve and check that the answer is physically sensible.
Newton’s laws
Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ
Method
Draw a free-body diagram with every force on the body.
Choose a positive direction along the motion.
Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
Apply ΣF = m·a along the motion; friction is μ·N against the motion.
Projectile motion
Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g
Method
Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
The horizontal motion has constant speed; the vertical motion has acceleration −g.
Find the time of flight from the vertical motion.
Use that time in the horizontal motion to find the range.
Circular motion
Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)
Work & energy
Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t
Momentum & collisions
Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv
Method
Choose a positive direction and give each velocity its sign.
Write the total momentum before: Σm·v.
For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
Set momentum before equal to momentum after and solve.
Rigid-body rotation
Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω
Method
Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.
Gears & gear trains
Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios
Springs & pendulums
Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²
Mechanical vibrations
Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2
2Practice problems
1.KinematicsMedium
A car driving at 100 km/h brakes with a constant deceleration of 3.5 m/s² until it stops. Find the braking distance s.
v₀ = 100 km/ha = −3.5 m/s²v = 0
s = m
2.KinematicsHard
A ball is thrown straight up at 10 m/s from the edge of a roof 25 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.
v₀ = 10 m/sh₀ = 25 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
A box slides across a level floor with an initial speed of 12 m/s and comes to rest after 29 m. Use g = 9.81 m/s². Find the coefficient of kinetic friction μ.
v₀ = 12 m/sd = 29 mg = 9.81 m/s²
μ =
4.Newton’s lawsHard
A block is given a push so that it starts sliding up a ramp at 15° with a speed of 8 m/s. The coefficient of kinetic friction is 0.2. Use g = 9.81 m/s². How far d along the ramp does it slide before it stops?
v₀ = 8 m/sθ = 15°μ = 0.2g = 9.81 m/s²
d = m
5.Projectile motionMedium
A ball is launched at 40° above horizontal from level ground. Ignore air resistance. Find the time of flight t until the ball hits the ground.
v0 = 36 m/sθ = 40°g = 9.81 m/s²
t = s
6.Projectile motionHard
A ball is launched at 11 m/s and 30° above the horizontal from the top of a 40 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the greatest height H above the ground at the foot of the cliff.
v₀ = 11 m/sθ = 30°h = 40 mg = 9.81 m/s²
H = m
7.Circular motionMedium
A small ball on a string of length 1.8 m moves in a horizontal circle so that the string makes a constant angle of 45° with the vertical (a conical pendulum). Use g = 9.81 m/s². Find the time T for one revolution.
L = 1.8 mθ = 45°g = 9.81 m/s²
T = s
8.Circular motionHard
A 1.9 kg ball on a light string 0.6 m long is swung in a vertical circle. At the lowest point its speed is 12 m/s. Ignore air resistance and use g = 9.81 m/s². Find the tension Ttop in the string at the highest point.
m = 1.9 kgr = 0.6 mvbottom = 12 m/sg = 9.81 m/s²
Ttop = N
9.Work & energyMedium
A block slides from rest down a slope at 40° to the horizontal. The coefficient of kinetic friction is 0.1. Find its speed v after it has slid 10 m along the slope.
θ = 40°μ = 0.1d = 10 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
A 4 kg block is released from rest at height 3.5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 1.5 m long (μ = 0.15) and then runs onto a spring (k = 1500 N/m) on a smooth surface. Find the maximum compression x of the spring.
m = 4 kgh = 3.5 mL = 1.5 mμ = 0.15k = 1500 N/mg = 9.81 m/s²
x = cm
11.Momentum & collisionsMedium
A 2000 kg car moving at 6 m/s runs into a stationary 1500 kg car and the two lock together. How much kinetic energy ΔK is lost in the collision?
m1 = 2000 kgv1 = 6 m/sm2 = 1500 kgv2 = 0
ΔK = J
12.Momentum & collisionsHard
A 15 g bullet is fired horizontally into a 4.5 kg block hanging from light strings 1.3 m long, and stays in it. The strings swing out to a largest angle of 35° from the vertical. Use g = 9.81 m/s². Find the speed v of the bullet before impact.
m = 15 gM = 4.5 kgL = 1.3 mθ = 35°g = 9.81 m/s²
v = m/s
13.Rigid-body rotationMedium
A flywheel with a moment of inertia of 30.5 kg·m² spins at 1000 rpm. A brake applies a constant friction torque of 35 N·m. How many revolutions N does the flywheel make before it stops?
I = 30.5 kg·m²n = 1000 rpmTb = 35 N·m
N = rev
14.Rigid-body rotationHard
A solid sphere rolls without slipping down a slope inclined at 40° to the horizontal. Use g = 9.81 m/s². Find the smallest coefficient of static friction μs that prevents it from slipping.
θ = 40°I = (2/5)·m·r²g = 9.81 m/s²
μs =
15.Gears & gear trainsMedium
A belt runs on a 120 mm driving pulley at 1450 rpm. The tension is 1000 N on the tight side and 300 N on the slack side. Find the power P transmitted, in kW.
d1 = 120 mmn1 = 1450 rpmT1 = 1000 NT2 = 300 N
P = kW
16.Gears & gear trainsHard
An open belt connects a 100 mm driving pulley at 2880 rpm to a 200 mm pulley; the centres are 500 mm apart. The coefficient of friction is 0.3 and the tight-side tension may not exceed 2000 N. Find the largest power P the belt can transmit without slipping, in kW (ignore centrifugal effects).
An astronaut on another planet finds that a simple pendulum 1.7 m long has a period of 4.25 s for small swings. Find the gravitational acceleration g on that planet.
L = 1.7 mT = 4.25 s
g = m/s²
18.Springs & pendulumsHard
A 0.4 kg mass is attached to the lower end of an unstretched vertical spring with k = 360 N/m and released from rest. Use g = 9.81 m/s². Find the greatest speed vmax of the mass.
m = 0.4 kgk = 360 N/mg = 9.81 m/s²
vmax = m/s
19.Mechanical vibrationsMedium
A 100 kg mass is supported by a spring with a stiffness of 200 kN/m and a viscous damper with a damping coefficient of 2240 N·s/m. Find the damping ratio ζ.
m = 100 kgk = 200 kN/mc = 2240 N·s/m
ζ =
20.Mechanical vibrationsHard
A 10 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 30 kN/m and the lower one k₂ = 25 kN/m. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.
m = 10 kgk1 = 30 kN/mk2 = 25 kN/m
fn = Hz
3Solutions
1.Kinematics
Answer: s = 110.2 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v₀ = 100/3.6 = 27.78 m/s
Braking distance
0 = v₀² − 2·a·s → s = v₀²/(2a) = 27.78²/(2·3.5) = 110.2 m
Answer
s = 110.2 m
2.Kinematics
Answer: t = 3.496 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equation of motion
Up is positive and the ground is h₀ below the starting point.
−25 = 10·t − ½·9.81·t²
4.905·t² − 10·t − 25 = 0
Solve the quadratic
Only the positive root is physical.
t = (10 + √(10² + 2·9.81·25))/9.81 = 3.496 s
Answer
t = 3.496 s
3.Newton’s laws
Answer: μ = 0.2531
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Deceleration
a = v₀²/(2d) = 12²/(2·29) = 2.483 m/s²
Friction coefficient
μ·m·g = m·a → μ = a/g = 2.483/9.81 = 0.2531
Answer
μ = 0.2531
4.Newton’s laws
Answer: d = 7.217 m
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Deceleration
Both forces point down the slope; the mass cancels.
a = 9.81·(sin 15° + 0.2·cos 15°) = 4.434 m/s²
Distance
d = v₀²/(2a) = 8²/(2·4.434) = 7.217 m
Answer
d = 7.217 m
5.Projectile motion
Answer: t = 4.718 s
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 36·cos 40° = 27.58 m/s
vy = v0·sin θ = 36·sin 40° = 23.14 m/s
Time in the air
Starting and landing at the same height: t = 2vy/g.
t = 2·23.14/9.81 = 4.718 s
Answer
t = 4.718 s
6.Projectile motion
Answer: H = 41.54 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Vertical launch speed
vy = 11·sin 30° = 5.5 m/s
Rise above the cliff
Δh = vy²/(2g) = 5.5²/(2·9.81) = 1.542 m
Height above the ground
H = 40 + 1.542 = 41.54 m
Answer
H = 41.54 m
7.Circular motion
Answer: T = 2.263 s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Radius of the circle
r = L·sin θ = 1.8·sin 45° = 1.273 m
Speed
Tension and gravity together give the inward force: tan θ = v²/(r·g).
v = √(r·g·tan θ) = √(1.273·9.81·tan 45°) = 3.534 m/s
Period
T = 2π·r/v = 2π·1.273/3.534 = 2.263 s
Answer
T = 2.263 s
8.Circular motion
Answer: Ttop = 362.8 N
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Speed at the top
Kinetic energy is traded for potential energy over a height 2r.
vtop² = 12² − 4·9.81·0.6 = 120.5 m²/s²
Forces at the top
Tension and gravity both point down, towards the centre.
T + m·g = m·vtop²/r
T = 1.9·120.5/0.6 − 1.9·9.81 = 362.8 N
Answer
Ttop = 362.8 N
9.Work & energy
Answer: v = 10.54 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy balance along the slope
The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.
½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·10·(0.6428 − 0.1·0.766)) = 10.54 m/s
Answer
v = 10.54 m/s
10.Work & energy
Answer: x = 41.39 cm
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy left after the rough strip
The ramp is smooth, so only the strip removes energy.
mgh − μmgL = 39.24·(3.5 − 0.15·1.5) = 128.5 J
Maximum compression
½kx² = 128.5 → x = √(2·128.5/1500) = 0.4139 m = 41.39 cm
Answer
x = 41.39 cm
11.Momentum & collisions
Answer: ΔK = 15429 J
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Common velocity
v′ = m1·v1/(m1 + m2) = 2000·6/3500 = 3.429 m/s
Kinetic energy before and after
Kbefore = ½·2000·6² = 36000 J
Kafter = ½·3500·3.429² = 20571 J
Energy lost
ΔK = 36000 − 20571 = 15429 J
Answer
ΔK = 15429 J
The lost energy goes into deformation, heat and sound.
12.Momentum & collisions
Answer: v = 646.5 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Rise of the block
h = L·(1 − cos θ) = 1.3·(1 − cos 35°) = 0.2351 m
Speed after impact
V = √(2·9.81·0.2351) = 2.148 m/s
Collision
v = (m + M)·V/m = 4.515·2.148/0.015 = 646.5 m/s
Answer
v = 646.5 m/s
13.Rigid-body rotation
Answer: N = 760.5 rev
Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.
Angular velocity
ω = 2π·1000/60 = 104.7 rad/s
Work of the brake equals the kinetic energy
½·I·ω² = ½·30.5·104.7² = 167235 J
θ = 167235/35 = 4778 rad
Revolutions
N = θ/2π = 760.5 rev
Answer
N = 760.5 rev
14.Rigid-body rotation
Answer: μs = 0.2397
Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.
Equations of motion
m·g·sin θ − f = m·a
f·r = I·α = 0.4·m·r²·(a/r) → f = 0.4·m·a
Acceleration
a = g·sin θ/(1 + c) = 9.81·sin 40°/1.4 = 4.504 m/s²
Friction needed
f = c·m·a ≤ μ·m·g·cos θ → μ ≥ c·tan θ/(1 + c)
μs = 0.4·tan 40°/1.4 = 0.2397
Answer
μs = 0.2397
15.Gears & gear trains
Answer: P = 6.377 kW
Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.
Belt speed
v = 9.111 m/s
Power
P = (1000 − 300)·9.111 = 6377 W = 6.377 kW
Answer
P = 6.377 kW
16.Gears & gear trains
Answer: P = 17.68 kW
Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.
Angle of wrap
θ = 2.941 rad
Slack-side tension
eμθ = e0.8824 = 2.417, T₂ = 2000/2.417 = 827.6 N
Power
P = (2000 − 827.6)·15.08 = 17.68 kW
Answer
P = 17.68 kW
17.Springs & pendulums
Answer: g = 3.716 m/s²
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Solve for g
g = 4π²·L/T² = 4π²·1.7/4.25² = 3.716 m/s²
Answer
g = 3.716 m/s²
18.Springs & pendulums
Answer: vmax = 0.327 m/s
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Equilibrium and amplitude
x₀ = m·g/k = 0.4·9.81/360 = 0.0109 m = A
Greatest speed
The speed is largest at equilibrium.
ω = √(360/0.4) = 30 rad/s
vmax = A·ω = 0.0109·30 = 0.327 m/s
Answer
vmax = 0.327 m/s
19.Mechanical vibrations
Answer: ζ = 0.2504
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Critical damping
cc = 2·√(k·m) = 2·√(200000·100) = 8944 N·s/m
Damping ratio
ζ = c/cc = 2240/8944 = 0.2504
Answer
ζ = 0.2504
ζ < 1, so the system is underdamped and oscillates as it decays.
20.Mechanical vibrations
Answer: fn = 5.877 Hz
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Equivalent stiffness
Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.