Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)3.75 s30

A car driving at 108 km/h brakes with a constant deceleration of 8 m/s² until it stops. Find the braking distance s.

v₀ = 108 km/ha = −8 m/s²v = 0
s = m
2.KinematicsHard
v₀ = 13 m/s30 m

A ball is thrown straight up at 13 m/s from the edge of a roof 30 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 13 m/sh₀ = 30 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
30 kg20°F = 70 Nμ = 0.1

A 30 kg sled is pulled across level snow by a rope at 20° above the horizontal with a force of 70 N. The coefficient of kinetic friction is 0.1. Use g = 9.81 m/s². Find the acceleration a of the sled.

m = 30 kgF = 70 Nθ = 20°μ = 0.1g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 9 kg9.5 kgθ = 40°

A 9 kg block on a ramp at 40° is connected by a light string over a frictionless pulley at the top of the ramp to a hanging 9.5 kg mass. The hanging mass moves down. The coefficient of kinetic friction between block and ramp is 0.1. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 9 kgm2 = 9.5 kgθ = 40°μ = 0.1g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = 32 m/s70°range

A ball is launched at 70° above horizontal from level ground. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 32 m/sθ = 70°g = 9.81 m/s²
t = s
6.Projectile motionHard
h = 15 mv0​ = 27 m/s45°range

A ball is launched at 45° above horizontal from the top of a 15 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 27 m/sθ = 45°h = 15 mg = 9.81 m/s²
t = s
7.Circular motionMedium
r = 110 mvmax​ = ?

A car takes a flat curve of radius 110 m. The coefficient of static friction between tyres and road is 0.6. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 110 mμs = 0.6g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
θ = 12°to centrevmax​ = ?

A curve of radius 190 m is banked at 12°, and the coefficient of static friction between tyres and road is 0.3. Use g = 9.81 m/s². Find the highest speed vmax at which a car can take the curve without sliding up and out.

r = 190 mθ = 12°μs = 0.3g = 9.81 m/s²
vmax = m/s
9.Work & energyMedium
0.25 kgk = 200 N/mh = ?

A toy launcher has a vertical spring of stiffness 200 N/m. A 0.25 kg ball is placed on it and the spring is compressed by 8 cm, then released. Ignoring air resistance and the spring’s mass, find the height h the ball rises, measured from its position when the spring was compressed.

m = 0.25 kgk = 200 N/mx = 8 cmg = 9.81 m/s²
h = m
10.Work & energyHard
F = 110 N15°μ = 0.215 kg

A 15 kg block starts from rest at the bottom of a 15° slope and is pulled up the slope by a constant force of 110 N parallel to the slope. The coefficient of kinetic friction is 0.2. Find the speed v of the block after it has moved 2 m up the slope.

m = 15 kgF = 110 Nθ = 15°μ = 0.2d = 2 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
3 kgv = ?8 gh = 4 cm

An 8 g bullet is fired horizontally into a 3 kg wooden block hanging on light strings, and stays inside it. The block swings up until it is 4 cm higher than at the start. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 8 gM = 3 kgh = 4 cmg = 9.81 m/s²
v = m/s
12.Momentum & collisionsHard
28 m/s13 m/s

A 0.35 kg ball hits a wall at 28 m/s and bounces straight back at 13 m/s. The contact lasts 25 ms. Find the magnitude of the impulse J the wall gives the ball.

m = 0.35 kgvin = 28 m/svout = 13 m/sΔt = 25 ms
J = N·s
13.Rigid-body rotationMedium
ω = ?L = 1.8 mm = 3 kg

A uniform slender rod of mass 3 kg and length 1.8 m is pinned at one end and released from rest in a horizontal position. Ignore friction and use g = 9.81 m/s². Find the angular velocity ω of the rod as it swings through the vertical position.

m = 3 kgL = 1.8 mg = 9.81 m/s²
ω = rad/s
14.Rigid-body rotationHard
580 m/s10 g0.29 mL = 0.6 m8.5 kgφ

A uniform slender rod of mass 8.5 kg and length 0.6 m hangs at rest from a frictionless pivot at its top end. A 10 g bullet moving horizontally at 580 m/s hits the rod 0.29 m below the pivot and stays embedded. Use g = 9.81 m/s². Find the largest angle φ from the vertical through which the rod swings.

M = 8.5 kgL = 0.6 mm = 10 gv = 580 m/sd = 0.29 mg = 9.81 m/s²
φ = °
15.Gears & gear trainsMedium
N1​ = ?N2​

Two parallel shafts are 45 mm apart. They must be connected by a pair of spur gears with a module of 1.5 mm and a speed reduction of 2 : 1. How many teeth N1 must the pinion have?

a = 45 mmm = 1.5 mmi = 2
N1 =
16.Gears & gear trainsHard
A = 15B = 18C = 24D = 32

In a compound gear train, gear A (15 teeth) on the input shaft turning at 1440 rpm drives gear B (18 teeth). Gear C (24 teeth) is fixed to the same shaft as B and drives gear D (32 teeth) on the output shaft. Find the output speed nout.

nin = 1440 rpmA = 15B = 18C = 24D = 32
nout = rpm
17.Springs & pendulumsMedium
t (s)x (cm)0.85 s

A 1.8 kg mass on a spring with k = 80 N/m is pulled 8 cm in the positive direction and released from rest at t = 0. Find its velocity v at t = 0.85 s (with sign).

m = 1.8 kgk = 80 N/mA = 8 cmt = 0.85 s
v = m/s
18.Springs & pendulumsHard
mk = 350 N/mA = 4 cmx = 1 cm

A mass on a spring with k = 350 N/m oscillates on a frictionless surface with an amplitude of 4 cm. Find the energy U stored in the spring when the mass is 1 cm from equilibrium.

k = 350 N/mA = 4 cmx = 1 cm
U = J
19.Mechanical vibrationsMedium
k = 100 kN/mc = 160 N·s/mm = 10 kg

A 10 kg mass is supported by a spring with a stiffness of 100 kN/m and a viscous damper with a damping coefficient of 160 N·s/m. Find the damping ratio ζ.

m = 10 kgk = 100 kN/mc = 160 N·s/m
ζ =
20.Mechanical vibrationsHard
k1​ = 100k2​ = 5m = 20 kg

A 20 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 100 kN/m and the lower one k₂ = 5 kN/m. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 20 kgk1 = 100 kN/mk2 = 5 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: s = 56.25 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 108/3.6 = 30 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 30²/(2·8) = 56.25 m

Answer

s = 56.25 m
2.Kinematics

Answer: t = 4.131 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−30 = 13·t − ½·9.81·t²
4.905·t² − 13·t − 30 = 0

Solve the quadratic

Only the positive root is physical.

t = (13 + √(13² + 2·9.81·30))/9.81 = 4.131 s

Answer

t = 4.131 s
3.Newton’s laws

Answer: a = 1.291 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Normal force

N = m·g − F·sin θ = 294.3 − 70·sin 20° = 270.4 N

Horizontal forces

m·a = F·cos θ − μ·N = 65.78 − 27.04
a = 38.74/30 = 1.291 m/s²

Answer

a = 1.291 m/s²
4.Newton’s laws

Answer: T = 77.95 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the string

m₂·g = 93.2 N
m₁·g·sin θ = 56.75 N
μ·m₁·g·cos θ = 6.763 N

Acceleration of the system

a = (93.2 − 56.75 − 6.763)/18.5 = 1.604 m/s²

Tension from the hanging mass

m2·g − T = m2·a → T = 9.5·(9.81 − 1.604) = 77.95 N

Answer

T = 77.95 N
5.Projectile motion

Answer: t = 6.131 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 32·cos 70° = 10.94 m/s
vy = v0·sin θ = 32·sin 70° = 30.07 m/s

Time in the air

Starting and landing at the same height: t = 2vy/g.

t = 2·30.07/9.81 = 6.131 s

Answer

t = 6.131 s
6.Projectile motion

Answer: t = 4.563 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 27·cos 45° = 19.09 m/s
vy = v0·sin θ = 27·sin 45° = 19.09 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 15 + 19.09·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (19.09 + √(364.5 + 294.3))/9.81 = 4.563 s

Answer

t = 4.563 s
7.Circular motion

Answer: vmax = 25.45 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.6·9.81·110) = 25.45 m/s

Answer

vmax = 25.45 m/s (91.6 km/h)
8.Circular motion

Answer: vmax = 31.94 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Force balances

Friction points down the slope.

N·(sin θ + μ·cos θ) = m·v²/r
N·(cos θ − μ·sin θ) = m·g

Speed

v = √(190·9.81·0.5014/0.9158) = 31.94 m/s

Answer

vmax = 31.94 m/s
(115 km/h)
9.Work & energy

Answer: h = 0.261 m

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Spring energy

x = 8 cm = 0.08 m
½kx² = ½·200·0.08² = 0.64 J

Height

m·g = 0.25·9.81 = 2.453 N
h = ½kx²/(mg) = 0.64/2.453 = 0.261 m

Answer

h = 0.261 m
10.Work & energy

Answer: v = 3.405 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Forces along the slope

m·g = 15·9.81 = 147.2 N
mg·sin θ = 38.09 N
μ·mg·cos θ = 28.43 N

Work–energy

½mv² = (110 − 66.51)·2 = 86.98 J
v = √(2·86.98/15) = 3.405 m/s

Answer

v = 3.405 m/s
11.Momentum & collisions

Answer: v = 333.1 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Swing after impact

V = √(2·g·h) = √(2·9.81·0.04) = 0.8859 m/s

Collision

m·v = (m + M)·V → v = (0.008 + 3)·0.8859/0.008 = 333.1 m/s

Answer

v = 333.1 m/s
12.Momentum & collisions

Answer: J = 14.35 N·s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.35·(13 + 28) = 14.35 N·s

Answer

J = 14.35 N·s
13.Rigid-body rotation

Answer: ω = 4.044 rad/s

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Loss of potential energy

m·g·L/2 = 3·9.81·0.9 = 26.49 J

Moment of inertia about the pin

IO = m·L²/3 = 3·1.8²/3 = 3.24 kg·m²

Energy balance

½·IO·ω² = 26.49 → ω = √(2·26.49/3.24) = 4.044 rad/s

Answer

ω = 4.044 rad/s
14.Rigid-body rotation

Answer: φ = 19.15 °

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Moment of inertia after the impact

I = M·L²/3 + m·d² = 8.5·0.6²/3 + 0.01·0.29² = 1.021 kg·m²

Angular momentum about the pivot

The pivot force passes through the pivot, so it has no moment there during the impact.

m·v·d = I·ω → ω = 0.01·580·0.29/1.021 = 1.648 rad/s

Energy during the swing

½·I·ω² = ½·1.021·1.648² = 1.386 J
(M·g·L/2 + m·g·d)·(1 − cos φ) = 25.04·(1 − cos φ)
cos φ = 1 − 1.386/25.04 = 0.9447 → φ = 19.15°

Answer

φ = 19.15°
15.Gears & gear trains

Answer: N1 = 20

Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.

Total number of teeth

N1 + N2 = 2a/m = 2·45/1.5 = 60

Split by the ratio

N1 = 60/(1 + 2) = 20

Answer

N1 = 20
16.Gears & gear trains

Answer: nout = 900 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

First stage

nB = 1440·15/18 = 1200 rpm = nC

Second stage

nout = 1200·24/32 = 900 rpm

Answer

nout = 900 rpm

total ratio = 1.6 : 1

17.Springs & pendulums

Answer: v = 0.3084 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(80/1.8) = 6.667 rad/s
ω·t = 6.667·0.85 = 5.667 rad

Velocity

v = −A·ω·sin(ω·t) = −0.08·6.667·sin(5.667) = 0.3084 m/s

Answer

v = 0.3084 m/s
18.Springs & pendulums

Answer: U = 0.0175 J

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Total energy

E = ½·k·A² = ½·350·0.04² = 0.28 J

Spring energy at x

U = ½·k·x² = ½·350·0.01² = 0.0175 J

Answer

U = 0.0175 J
19.Mechanical vibrations

Answer: ζ = 0.08

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(100000·10) = 2000 N·s/m

Damping ratio

ζ = c/cc = 160/2000 = 0.08

Answer

ζ = 0.08

ζ < 1, so the system is underdamped and oscillates as it decays.

20.Mechanical vibrations

Answer: fn = 2.456 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.

1/keq = 1/100 + 1/5 → keq = 100·5/(100 + 5) = 4.762 kN/m

Natural frequency

ωn = √(4762/20) = 15.43 rad/s
fn = 15.43/(2π) = 2.456 Hz

Answer

fn = 2.456 Hz

ExamProblems · examproblems.com/courses/dynamics