Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)t = ?33.33

A car driving at 120 km/h brakes with a constant deceleration of 3 m/s² until it stops. How long does braking take? Find t.

v₀ = 120 km/ha = −3 m/s²v = 0
t = s
2.KinematicsHard
d = ?

A stone is dropped from rest into a well. The splash is heard 2.7 s after the stone is released. The speed of sound is 343 m/s; ignore air resistance and use g = 9.81 m/s². Find the depth d of the well.

ttotal = 2.7 svsound = 343 m/sg = 9.81 m/s²
d = m
3.Newton’s lawsMedium
boxv₀ = 6 m/sμ = ?

A box slides across a level floor with an initial speed of 6 m/s and comes to rest after 12 m. Use g = 9.81 m/s². Find the coefficient of kinetic friction μ.

v₀ = 6 m/sd = 12 mg = 9.81 m/s²
μ =
4.Newton’s lawsHard
8 kg1 kgTF = 75 Nμ = 0.2

Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 75 N pulls the front 1 kg block; the 8 kg block is towed behind. The coefficient of kinetic friction is 0.2 for both blocks. Use g = 9.81 m/s². Find the acceleration a of the blocks.

m1 = 8 kgm2 = 1 kgF = 75 Nμ = 0.2g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
v0​ = 38 m/s50°range

A ball is launched at 50° above horizontal from level ground. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 38 m/sθ = 50°g = 9.81 m/s²
t = s
6.Projectile motionHard
10 mv0​ = 39 m/s40°x = ?

A ball is thrown from ground level at 39 m/s and 40° above the horizontal. It lands on the flat roof of a building 10 m high, on its way down. Ignore air resistance and use g = 9.81 m/s². Find the horizontal distance x from the launch point to where it lands.

v₀ = 39 m/sθ = 40°hroof = 10 mg = 9.81 m/s²
x = m
7.Circular motionMedium
θ = 20°to centrev = ?

A curve of radius 390 m is banked at 20°. At what speed v can a car take it with no friction needed at all? Use g = 9.81 m/s².

r = 390 mθ = 20°g = 9.81 m/s²
v = m/s
8.Circular motionHard
r = 0.8 m12 m/svtop​ = ?

A 1.6 kg ball on a light string 0.8 m long is swung in a vertical circle. At the lowest point its speed is 12 m/s. Ignore air resistance and use g = 9.81 m/s². Find the tension Ttop in the string at the highest point.

m = 1.6 kgr = 0.8 mvbottom = 12 m/sg = 9.81 m/s²
Ttop = N
9.Work & energyMedium
25°d = 8 mμ = 0.1

A 10 kg block slides 8 m down a slope at 25° to the horizontal, with a coefficient of kinetic friction of 0.1. Find the work Wf done against friction.

m = 10 kgθ = 25°μ = 0.1d = 8 mg = 9.81 m/s²
Wf = J
10.Work & energyHard
h = 6 mR = 1.5 mv = ?

A 2 kg cart is released from rest at a height of 6 m on a smooth track that leads into a vertical circular loop of radius 1.5 m. Find the speed v of the cart at the top of the loop.

m = 2 kgh = 6 mR = 1.5 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
5 kg9 m/s2.5 kg

A 5 kg glider moving at 9 m/s makes a perfectly elastic head-on collision with a 2.5 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).

m1 = 5 kgm2 = 2.5 kgv1 = 9 m/sv2 = 0
v′1 = m/s
12.Momentum & collisionsHard
3.5 kgv = ?8 g20°L = 1.5 m

An 8 g bullet is fired horizontally into a 3.5 kg block hanging from light strings 1.5 m long, and stays in it. The strings swing out to a largest angle of 20° from the vertical. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 8 gM = 3.5 kgL = 1.5 mθ = 20°g = 9.81 m/s²
v = m/s
13.Rigid-body rotationMedium
n = 400 rpmT = 230 N·m

A motor delivers a torque of 230 N·m at 400 rpm. Find its power output P in kW.

T = 230 N·mn = 400 rpm
P = kW
14.Rigid-body rotationHard
10 m/sω

A thin hoop of mass 7 kg rolls without slipping at 10 m/s. Find its rotational kinetic energy Erot.

m = 7 kgv = 10 m/sI = m·r²
Erot = J
15.Gears & gear trainsMedium
N1​ = ?N2​

Two parallel shafts are 125 mm apart. They must be connected by a pair of spur gears with a module of 2.5 mm and a speed reduction of 4 : 1. How many teeth N1 must the pinion have?

a = 125 mmm = 2.5 mmi = 4
N1 =
16.Gears & gear trainsHard
A = 18B = 20C = 15D = ?

In a compound gear train, gear A (18 teeth) on the input shaft turns at 2880 rpm and drives gear B (20 teeth). Gear C (15 teeth) is fixed to the same shaft as B and drives gear D on the output shaft. The output must turn at 1080 rpm. How many teeth ND must gear D have?

nin = 2880 rpmA = 18B = 20C = 15nout = 1080 rpm
ND =
17.Springs & pendulumsMedium
L = 2.9 m

A simple pendulum has a length of 2.9 m. Use g = 9.81 m/s². Find its period T for small swings.

L = 2.9 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
1.6 kgk = 470 N/m

A 1.6 kg mass is attached to the lower end of an unstretched vertical spring with k = 470 N/m and released from rest. Use g = 9.81 m/s². Find the greatest speed vmax of the mass.

m = 1.6 kgk = 470 N/mg = 9.81 m/s²
vmax = m/s
19.Mechanical vibrationsMedium
k = 20 kN/mc = 2000 N·s/mm = 200 kg

A 200 kg mass is supported by a spring with a stiffness of 20 kN/m and a viscous damper with a damping coefficient of 2000 N·s/m. Find the damping ratio ζ.

m = 200 kgk = 20 kN/mc = 2000 N·s/m
ζ =
20.Mechanical vibrationsHard
k1​ = 30k2​ = 30m = 40 kg

A 40 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 30 kN/m and k₂ = 30 kN/m. The mass stays level. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 40 kgk1 = 30 kN/mk2 = 30 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: t = 11.11 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 120/3.6 = 33.33 m/s

Braking time

0 = v₀ − a·t → t = v₀/a = 33.33/3 = 11.11 s

Answer

t = 11.11 s
2.Kinematics

Answer: d = 33.24 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Two parts of the time

½·9.81·t₁² = 343·(2.7 − t₁)
4.905·t₁² + 343·t₁ − 926.1 = 0

Fall time

Only the positive root is physical.

t₁ = (−343 + √(343² + 4·4.905·926.1))/(2·4.905) = 2.603 s

Depth

d = ½·9.81·2.603² = 33.24 m

Answer

d = 33.24 m
3.Newton’s laws

Answer: μ = 0.1529

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Deceleration

a = v₀²/(2d) = 6²/(2·12) = 1.5 m/s²

Friction coefficient

μ·m·g = m·a → μ = a/g = 1.5/9.81 = 0.1529

Answer

μ = 0.1529
4.Newton’s laws

Answer: a = 6.371 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Whole system

a = (F − μ·(m1 + m2)·g)/(m1 + m2) = (75 − 17.66)/9 = 6.371 m/s²

Answer

a = 6.371 m/s²
5.Projectile motion

Answer: t = 5.935 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 38·cos 50° = 24.43 m/s
vy = v0·sin θ = 38·sin 50° = 29.11 m/s

Time in the air

Starting and landing at the same height: t = 2vy/g.

t = 2·29.11/9.81 = 5.935 s

Answer

t = 5.935 s
6.Projectile motion

Answer: x = 139.7 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

vx = 29.88 m/s, vy = 25.07 m/s

Time to land on the roof

Larger root: the ball is descending.

10 = 25.07·t − 4.905·t²
t = (25.07 + √(25.07² − 2·9.81·10))/9.81 = 4.675 s

Horizontal distance

x = vx·t = 29.88·4.675 = 139.7 m

Answer

x = 139.7 m
7.Circular motion

Answer: v = 37.32 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Force balance

N·cos θ = m·g, N·sin θ = m·v²/r → tan θ = v²/(r·g)

Speed

v = √(r·g·tan θ) = √(390·9.81·tan 20°) = 37.32 m/s

Answer

v = 37.32 m/s
(134.3 km/h)
8.Circular motion

Answer: Ttop = 209.5 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Speed at the top

Kinetic energy is traded for potential energy over a height 2r.

vtop² = 12² − 4·9.81·0.8 = 112.6 m²/s²

Forces at the top

Tension and gravity both point down, towards the centre.

T + m·g = m·vtop²/r
T = 1.6·112.6/0.8 − 1.6·9.81 = 209.5 N

Answer

Ttop = 209.5 N
9.Work & energy

Answer: Wf = 71.13 J

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Friction force

N = mg·cos θ = 98.1·0.9063 = 88.91 N
F = μN = 0.1·88.91 = 8.891 N

Work against friction

Wf = F·d = 8.891·8 = 71.13 J

Answer

Wf = 71.13 J
10.Work & energy

Answer: v = 7.672 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.

Speed at the top

v² = 2g(h − 2R) = 2·9.81·(6 − 3) = 58.86 m²/s²
v = 7.672 m/s

Answer

v = 7.672 m/s

The cart just makes it round when h = 2.5R; then N = 0 at the top.

11.Momentum & collisions

Answer: v′1 = 3 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (5 − 2.5)/(5 + 2.5)·9 = 3 m/s
v′2 = 2·5/(5 + 2.5)·9 = 12 m/s

Answer

v′1 = 3 m/s
12.Momentum & collisions

Answer: v = 584.2 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Rise of the block

h = L·(1 − cos θ) = 1.5·(1 − cos 20°) = 0.09046 m

Speed after impact

V = √(2·9.81·0.09046) = 1.332 m/s

Collision

v = (m + M)·V/m = 3.508·1.332/0.008 = 584.2 m/s

Answer

v = 584.2 m/s
13.Rigid-body rotation

Answer: P = 9.634 kW

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·400/60 = 41.89 rad/s

Power

P = T·ω = 230·41.89 = 9634 W = 9.634 kW

Answer

P = 9.634 kW
14.Rigid-body rotation

Answer: Erot = 350 J

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Translational and rotational parts

Etrans = ½·m·v² = ½·7·10² = 350 J
Erot = ½·I·ω² = ½·1·m·r²·(v/r)² = 1·350 = 350 J

Answer

Erot = 350 J
15.Gears & gear trains

Answer: N1 = 20

Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.

Total number of teeth

N1 + N2 = 2a/m = 2·125/2.5 = 100

Split by the ratio

N1 = 100/(1 + 4) = 20

Answer

N1 = 20
16.Gears & gear trains

Answer: ND = 36

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Intermediate shaft speed

nB = nC = 2880·18/20 = 2592 rpm

Teeth on gear D

ND = C·nC/nout = 15·2592/1080 = 36

Answer

ND = 36
17.Springs & pendulums

Answer: T = 3.416 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Pendulum period

T = 2π·√(2.9/9.81) = 3.416 s

Answer

T = 3.416 s
18.Springs & pendulums

Answer: vmax = 0.5724 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Equilibrium and amplitude

x₀ = m·g/k = 1.6·9.81/470 = 0.0334 m = A

Greatest speed

The speed is largest at equilibrium.

ω = √(470/1.6) = 17.14 rad/s
vmax = A·ω = 0.0334·17.14 = 0.5724 m/s

Answer

vmax = 0.5724 m/s
19.Mechanical vibrations

Answer: ζ = 0.5

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(20000·200) = 4000 N·s/m

Damping ratio

ζ = c/cc = 2000/4000 = 0.5

Answer

ζ = 0.5

ζ < 1, so the system is underdamped and oscillates as it decays.

20.Mechanical vibrations

Answer: fn = 6.164 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 30 + 30 = 60 kN/m

Natural frequency

ωn = √(60000/40) = 38.73 rad/s
fn = 38.73/(2π) = 6.164 Hz

Answer

fn = 6.164 Hz

ExamProblems · examproblems.com/courses/dynamics