Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
policea = 3.5 m/s²car20 m/s

A car speeding at a constant 20 m/s passes a police car standing still. At that moment the police car starts and accelerates uniformly at 3.5 m/s². How far from its starting point does the police car catch up? Find d.

vcar = 20 m/sapolice = 3.5 m/s²v0,police = 0
d = m
2.KinematicsHard
v₀ = 16 m/s25 m

A ball is thrown straight up at 16 m/s from the edge of a roof 25 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 16 m/sh₀ = 25 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
5.5 kg1 kg

Masses of 5.5 kg and 1 kg hang on either side of a light, frictionless pulley, connected by a light string. The system is released from rest. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 5.5 kgm2 = 1 kgg = 9.81 m/s²
T = N
4.Newton’s lawsHard
m1​ = 9 kg4.5 kgμ = 0.1

A 9 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 4.5 kg mass. The coefficient of kinetic friction between block and table is 0.1. Use g = 9.81 m/s². Find the acceleration a of the system.

m1 = 9 kgm2 = 4.5 kgμ = 0.1g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
v0​ = 36 m/sθ = ?R = 100 m

A ball is launched from level ground at 36 m/s and must land 100 m away. Ignore air resistance and use g = 9.81 m/s². Find the smaller of the two possible launch angles θ.

v₀ = 36 m/sR = 100 mg = 9.81 m/s²
θ = °
6.Projectile motionHard
h = 5 mv0​ = 18 m/s15°range

A ball is launched at 15° above horizontal from the top of a 5 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 18 m/sθ = 15°h = 5 mg = 9.81 m/s²
t = s
7.Circular motionMedium
r = 2.8 mn = ?

In a fairground rotor, riders stand against the wall of a vertical cylinder of radius 2.8 m. When it spins fast enough the floor drops away and friction holds them up. The coefficient of static friction is 0.8. Use g = 9.81 m/s². Find the smallest rotation rate n in revolutions per minute.

r = 2.8 mμs = 0.8g = 9.81 m/s²
n = rpm
8.Circular motionHard
R = 1 mh = 4.3 m

A 1 kg cart is released from rest at a height of 4.3 m on a frictionless track and runs through a vertical loop of radius 1 m. Use g = 9.81 m/s². Find the normal force Ntop of the track on the cart at the top of the loop.

m = 1 kgh = 4.3 mR = 1 mg = 9.81 m/s²
Ntop = N
9.Work & energyMedium
35°d = 2 mμ = 0.1

A 2.5 kg block slides 2 m down a slope at 35° to the horizontal, with a coefficient of kinetic friction of 0.1. Find the work Wf done against friction.

m = 2.5 kgθ = 35°μ = 0.1d = 2 mg = 9.81 m/s²
Wf = J
10.Work & energyHard
h = 2 mL = 4 mμ = 0.3k = 2500 N/m

A 2 kg block is released from rest at height 2 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 4 m long (μ = 0.3) and then runs onto a spring (k = 2500 N/m) on a smooth surface. Find the speed v of the block when it reaches the spring.

m = 2 kgh = 2 mL = 4 mμ = 0.3k = 2500 N/mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
1400 kg21 m/s1700 kg

A 1400 kg car moving at 21 m/s runs into a stationary 1700 kg car and the two lock together. How much kinetic energy ΔK is lost in the collision?

m1 = 1400 kgv1 = 21 m/sm2 = 1700 kgv2 = 0
ΔK = J
12.Momentum & collisionsHard
4 kgv = ?12 g30°L = 0.5 m

A 12 g bullet is fired horizontally into a 4 kg block hanging from light strings 0.5 m long, and stays in it. The strings swing out to a largest angle of 30° from the vertical. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 12 gM = 4 kgL = 0.5 mθ = 30°g = 9.81 m/s²
v = m/s
13.Rigid-body rotationMedium
n = 1500 rpmTb​ = 115 N·mI = 7 kg·m²

A flywheel with a moment of inertia of 7 kg·m² spins at 1500 rpm. A brake applies a constant friction torque of 115 N·m. How many revolutions N does the flywheel make before it stops?

I = 7 kg·m²n = 1500 rpmTb = 115 N·m
N = rev
14.Rigid-body rotationHard
θ = 15°vs = 2 m

A thin hoop starts from rest and rolls without slipping down a slope inclined at 15° to the horizontal. Use g = 9.81 m/s². Its radius is 0.25 m. Find its angular velocity ω after it has rolled 2 m along the slope.

θ = 15°s = 2 mI = m·r²g = 9.81 m/s²r = 0.25 m
ω = rad/s
15.Gears & gear trainsMedium
N1​N2​ = ?

Two parallel shafts are 128 mm apart. They must be connected by a pair of spur gears with a module of 4 mm and a speed reduction of 3 : 1. How many teeth N2 must the gear have?

a = 128 mmm = 4 mmi = 3
N2 =
16.Gears & gear trainsHard
d1​ = 125 mmd2​ = 300 mm960 rpmC = 1000 mmT1​ = 1500 NT2​P = ?

An open belt connects a 125 mm driving pulley at 960 rpm to a 300 mm pulley; the centres are 1000 mm apart. The coefficient of friction is 0.3 and the tight-side tension may not exceed 1500 N. Find the largest power P the belt can transmit without slipping, in kW (ignore centrifugal effects).

d1 = 125 mmn1 = 960 rpmd2 = 300 mmC = 1000 mmμ = 0.3T1 = 1500 N
P = kW
17.Springs & pendulumsMedium
3.2 kgk = 360 N/mA = 14 cmx = 13 cm

A 3.2 kg mass on a spring with k = 360 N/m oscillates on a frictionless surface with an amplitude of 14 cm. Find its speed v when it is 13 cm from equilibrium.

m = 3.2 kgk = 360 N/mA = 14 cmx = 13 cm
v = m/s
18.Springs & pendulumsHard
2.5 kgk = 420 N/m

A 2.5 kg mass is attached to the lower end of an unstretched vertical spring with k = 420 N/m and released from rest. Use g = 9.81 m/s². Find the greatest extension xmax of the spring in cm.

m = 2.5 kgk = 420 N/mg = 9.81 m/s²
xmax = cm
19.Mechanical vibrationsMedium
k = 25 kN/mζ = 0.3m = 80 kg

An 80 kg mass on a spring with a stiffness of 25 kN/m has a viscous damper giving a damping ratio of 0.3. Find the damped natural frequency fd of its free vibration in Hz.

m = 80 kgk = 25 kN/mζ = 0.3
fd = Hz
20.Mechanical vibrationsHard
k1​ = 30k2​ = 100m = 5 kg

A 5 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 30 kN/m and the lower one k₂ = 100 kN/m. Find the equivalent stiffness keq of the spring system in kN/m.

m = 5 kgk1 = 30 kN/mk2 = 100 kN/m
keq = kN/m

3Solutions

1.Kinematics

Answer: d = 228.6 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equal distances

v·t = ½·a·t² → t = 2v/a = 2·20/3.5 = 11.43 s

Distance

d = v·t = 20·11.43 = 228.6 m

Answer

d = 228.6 m

At that moment the police car moves at 2v = 40 m/s.

2.Kinematics

Answer: t = 4.416 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−25 = 16·t − ½·9.81·t²
4.905·t² − 16·t − 25 = 0

Solve the quadratic

Only the positive root is physical.

t = (16 + √(16² + 2·9.81·25))/9.81 = 4.416 s

Answer

t = 4.416 s
3.Newton’s laws

Answer: T = 16.6 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration

The net driving force is the difference of the weights; it moves the total mass.

a = (5.5 − 1)·9.81/(5.5 + 1) = 6.792 m/s²

Tension from the lighter mass

T − m2·g = m2·a → T = 1·(9.81 + 6.792) = 16.6 N

Answer

T = 16.6 N
4.Newton’s laws

Answer: a = 2.616 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (44.15 − 8.829)/13.5 = 2.616 m/s²

Answer

a = 2.616 m/s²
5.Projectile motion

Answer: θ = 24.6 °

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Range formula

R = v₀²·sin 2θ/g → sin 2θ = 9.81·100/36² = 0.7569

Angle

2θ = 49.2° → θ = 24.6°

Answer

θ = 24.6°

The other solution is 90° − θ = 65.4°.

6.Projectile motion

Answer: t = 1.591 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 18·cos 15° = 17.39 m/s
vy = v0·sin θ = 18·sin 15° = 4.659 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 5 + 4.659·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (4.659 + √(21.7 + 98.1))/9.81 = 1.591 s

Answer

t = 1.591 s
7.Circular motion

Answer: n = 19.98 rpm

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces on a rider

N = m·ω²·r
μ·N = m·g → μ·ω²·r = g

Angular speed

ω = √(g/(μ·r)) = √(9.81/(0.8·2.8)) = 2.093 rad/s

Rotation rate

n = ω·60/(2π) = 19.98 rpm

Answer

n = 19.98 rpm
8.Circular motion

Answer: Ntop = 35.32 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Speed from energy conservation

v² = 2·9.81·(4.3 − 2·1) = 45.13 m²/s²

Forces

Towards the centre is positive.

N = m·v²/R − m·g = 1·45.13/1 − 9.81 = 35.32 N

Answer

Ntop = 35.32 N
9.Work & energy

Answer: Wf = 4.018 J

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Friction force

N = mg·cos θ = 24.53·0.8192 = 20.09 N
F = μN = 0.1·20.09 = 2.009 N

Work against friction

Wf = F·d = 2.009·2 = 4.018 J

Answer

Wf = 4.018 J
10.Work & energy

Answer: v = 3.962 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 19.62·(2 − 0.3·4) = 15.7 J

Speed at the spring

½mv² = mg(h − μL) → v = √(2g(h − μL)) = √(2·9.81·0.8) = 3.962 m/s

Answer

v = 3.962 m/s
11.Momentum & collisions

Answer: ΔK = 169287 J

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Common velocity

v′ = m1·v1/(m1 + m2) = 1400·21/3100 = 9.484 m/s

Kinetic energy before and after

Kbefore = ½·1400·21² = 308700 J
Kafter = ½·3100·9.484² = 139413 J

Energy lost

ΔK = 308700 − 139413 = 169287 J

Answer

ΔK = 169287 J

The lost energy goes into deformation, heat and sound.

12.Momentum & collisions

Answer: v = 383.3 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Rise of the block

h = L·(1 − cos θ) = 0.5·(1 − cos 30°) = 0.06699 m

Speed after impact

V = √(2·9.81·0.06699) = 1.146 m/s

Collision

v = (m + M)·V/m = 4.012·1.146/0.012 = 383.3 m/s

Answer

v = 383.3 m/s
13.Rigid-body rotation

Answer: N = 119.5 rev

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·1500/60 = 157.1 rad/s

Work of the brake equals the kinetic energy

½·I·ω² = ½·7·157.1² = 86359 J
θ = 86359/115 = 750.9 rad

Revolutions

N = θ/2π = 119.5 rev

Answer

N = 119.5 rev
14.Rigid-body rotation

Answer: ω = 9.014 rad/s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Height dropped

h = s·sin θ = 2·sin 15° = 0.5176 m

Energy balance with rolling

Rolling without slipping: ω = v/r, and friction does no work at the contact point.

m·g·h = ½·m·v²·(1 + 1)
v = √(2·9.81·0.5176/2) = 2.253 m/s
ω = v/r = 2.253/0.25 = 9.014 rad/s

Answer

ω = 9.014 rad/s
15.Gears & gear trains

Answer: N2 = 48

Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.

Total number of teeth

N1 + N2 = 2a/m = 2·128/4 = 64

Split by the ratio

N1 = 64/(1 + 3) = 16
N2 = 3·16 = 48

Answer

N2 = 48
16.Gears & gear trains

Answer: P = 5.554 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Angle of wrap

θ = 2.966 rad

Slack-side tension

eμθ = e0.8899 = 2.435, T₂ = 1500/2.435 = 616 N

Power

P = (1500 − 616)·6.283 = 5.554 kW

Answer

P = 5.554 kW
17.Springs & pendulums

Answer: v = 0.5511 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(360/3.2) = 10.61 rad/s

Speed at x

v = ω·√(A² − x²) = 10.61·√(0.14² − 0.13²) = 0.5511 m/s

Answer

v = 0.5511 m/s
18.Springs & pendulums

Answer: xmax = 11.68 cm

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Equilibrium and amplitude

x₀ = m·g/k = 2.5·9.81/420 = 0.05839 m = A

Lowest point

xmax = 2A = 0.1168 m = 11.68 cm

Answer

xmax = 11.68 cm
19.Mechanical vibrations

Answer: fd = 2.684 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(25000/80) = 17.68 rad/s
fn = 17.68/(2π) = 2.813 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 2.813·√(1 − 0.3²) = 2.684 Hz

Answer

fd = 2.684 Hz
20.Mechanical vibrations

Answer: keq = 23.08 kN/m

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.

1/keq = 1/30 + 1/100 → keq = 30·100/(30 + 100) = 23.08 kN/m

Answer

keq = 23.08 kN/m

ExamProblems · examproblems.com/courses/dynamics